DOI QR코드

DOI QR Code

Optimum Suspension System Design for a Drum-typed Washing Machine

드럼세탁기 현가시스템의 최적설계

  • Cha, Sang-Tae (Department of Mechatronics Engineering, Pukyong National University) ;
  • Baek, Woon-Kyung (Department of Mechanical and Automotive Engineering, Pukyong National University)
  • 차상태 (부경대학교 대학원 메카트로닉스공학과) ;
  • 백운경 (부경대학교 기계자동차공학과)
  • Received : 2013.10.10
  • Accepted : 2014.03.26
  • Published : 2014.06.30

Abstract

Most washing machines are now produced as a drum-type, where a washing drum mounted on a suspension system with springs and dampers, to minimize the transmittance of the vibration from the drum to the cabinet. The purpose of this paper is to develop optimized suspension system of the drum washing machine which minimizes transmission of disturbing vibration and force. In this paper, a method for optimizing suspension system of the drum washing machine is presented using ADAMS. The design variables to optimize are extracted using Sequential Quadratic Programming(SQP) in ADAMS. To evaluate optimized spring constants and damping coefficients of the drum washing machine, simulation was done to compare the vibration attenuation performances before and after the optimization. The results of simulation show that the optimized suspension system has better performance than before the optimization.

Keywords

References

  1. M. G. Kim and B. S. Jung, 2004, "The Reduction of Cabinet Vibration of Drum Type Washing Machine Using NASTRAN", Mscsoftware forum.
  2. D. C. Conrad and W. Soedel, 1995, "On the Problem of Oscillatory Walk of Automatic Washing Machines", Journal of Sound and Vibration, Vol. 188, No. 3, pp. 301-314. https://doi.org/10.1006/jsvi.1995.0595
  3. O. S. Turkay, B. Kiray, A. K. Tugcu, and I. T. Sumer, 1995, "Formulation and implementation of parametric optimisation of a washing machine suspension system", Mechanical Systems and Signal Processing, Vol. 9, No. 4, pp. 359-377. https://doi.org/10.1006/mssp.1995.0029
  4. K. R. Chung, J. B. Lee, M. S. Im, and J. M. Yun, 1993, "Computer Simulation for Dynamic Analysis of Rigid body Suspension System for Washing machine", Transaction of the Korean Society for Noise and Vibration Engineering, Vol. 3, No. 1, pp. 65-75.
  5. C. Spelta, Fabio Previdi, Sergio M. savaresi, Giuseppe Fraternale, and Nicola Gaudiano, 2009, "Control of Magnetorheological Dampers for Vibration Reduction in a Washing Machine", Mechatronics, Vol. 19, pp. 410-421. https://doi.org/10.1016/j.mechatronics.2008.09.006
  6. S. T. Cha and W. K. Baek, 2013, "Vibration Attenuation of a Drum-typed Washing Machine Using Magneto-Rheological Dampers", Journal of the Korean Society for Power System Engineering, Vol. 12, No. 2, pp. 63-69.
  7. W. K. Baek and C. M. Kim, 2011, "Empirical Design Method for the Damping Force Characteristics of Shock Absorbers", Journal of the Korean Society for Power System Engineering, Vol. 15, No. 4, pp. 11-18.
  8. L. Sperling, B. Ryzhik, C. Linz, and H. Duckstein, 2002, "Simulation of two-plane automatic balancing of a rigid rotor", Journal of Mathematics and computers in simulation, Vol. 58(4-6), pp. 351-365. https://doi.org/10.1016/S0378-4754(01)00377-9
  9. Jasbir S. Arora, 1989, "Introduction to Optimum Design", McGraw-Hill, Inc.

Cited by

  1. Cabinet Design for Vibration Reduction of a Drum Type Washing Machine vol.33, pp.9, 2016, https://doi.org/10.7736/KSPE.2016.33.9.731