• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.12
• /
• pp.1672-1681
• /
• 2007

Cationization is effective to complement the defects of Tencel blended fabrics by introducing new functions. For this purpose, we used chitosan, which is congenial to the human body, free of pollution, and easily reacted. Then, we compared it to the Tencel single fabrics. To perform such effective cationization, the fabrics were treated with chitosan after NaOH pretreatment and enzyme treatment thereof. After that, the fabrics were treated with a crosslinking agent and a softner. The dyeing property of the cationized Tencel blended fabrics and reactive dye, which is a type of anionic dye, show a high concentration in neutral salt and excellent repulsive power between the fabrics and the decreased dyes. The dyeing property of the chitosan treated fabrics represented better performances than that of untreated fabric in the lower concentration of neutral salt. Meanwhile, when it was dyed with certain acid dyes, the dyeing property of the chitosan treated fabrics showed better results due to the reaction of an amine group, which was introduced by chitosan treatment. Thus, the verification of the cationization of the Tencel blended fabrics was performed. The washing fastness of the Tencel blended fabrics showed a little bit better than that of the Tencel single fabric, and it represented a better performance in the dye with a reactive dye than that of an acid dye.

• Korean Journal of Materials Research
• /
• v.28 no.11
• /
• pp.663-670
• /
• 2018

H13 tool steels are widely used as metallic mold materials due to their high hardness and thermal stability. Recently, many studies are undertaken to satisfy the demands for manufacturing the complex shape of the mold using a 3D printing technique. It is reported that the mechanical properties of 3D printed materials are lower than those of commercial forged alloys owing to micropores. In this study, we investigate the effect of microstructures and defects on mechanical properties in the 3D printed H13 tool steels. H13 tool steel is fabricated using a selective laser melting(SLM) process with a scan speed of 200 mm/s and a layer thickness of $25{\mu}m$. Microstructures are observed and porosities are measured by optical and scanning electron microscopy in the X-, Y-, and Z-directions with various the build heights. Tiny keyhole type pores are observed with a porosity of 0.4 %, which shows the lowest porosity in the center region. The measured Vickers hardness is around 550 HV and the yield and tensile strength are 1400 and 1700 MPa, respectively. The tensile properties are predicted using two empirical equations through the measured values of the Vickers hardness. The prediction of tensile strength has high accuracy with the experimental data of the 3D printed H13 tool steel. The effects of porosities and unmelted powders on mechanical properties are also elucidated by the metallic fractography analysis to understand tensile and fracture behavior.

• Journal of Periodontal and Implant Science
• /
• v.34 no.1
• /
• pp.177-193
• /
• 2004

Several experimental studies showed that the application of small amounts of electric current to bone stimulated osteogenesis at the site of the cathode and suggested that electrical currents promote osseointegration around dental implants. The purpose of this study was to determine the effect of direct microcurrent to endosseous titanium implants placed in bone defects. The right and left 2nd, 3rd and 4th mandibular premolars in ten mongrel dogs (15Kg of weight) were extracted. One monthe later, Ti-machined screw type implants(3.8 mm diameter x 8.5 mm length, $AVANA^{(R)}$, Ostem) were placed in surgically created circumferential defect area(width 5mm, depth 4mm). The implants were divided into three groups according to the treatment modalities: Control group- implants without electrical stimulation; Experimental group I- implants with allogenic demineralized freeze dried bone grafting; and Experimental group II-implants allogenic demineralized freeze dried bone grafting and electric stimulation. The animals were sacrificed in the 4th and 8th week after implant placement and un-decalcified specimens were prepared for histological and histometrical evaluation of bone-implant contact ratio (BIC) and bone formation area ratio (BFA) in defect area. Some specimens at 8 weeks after implantation were used for removal torque testing. Histologically, there was connective tissue infiltration in the coronal part of defect area in control and the experimental group I, whereas direct bone contact was found in the experimental group II without connective tissue invasion. Average BIC ratios at 4 weeks of healing were 60.1% in the experimental group II, 47.4% in the experimental group I and 42.7% in the control. Average BIC ratios at 8 weeks after implantation were 67.6% in the experimental group II, 55.9% in the experimental group I and 54.6% in the control. The average BFA ratio was 84.0% in the experimental group II, 71.8% in the experimental group I and 58.8% in the control at 4 weeks, and the BFA ratios were 89.6% in the experimental group II, 81.4% in the experimental group I and 70.5% in the control at 8 weeks after implantation. The experimental group II showed also significantly greater BIC and BFA ratios compared to the control and the experimental group I (p<0.05). The removal torque values at 8 weeks after implantation were 56 Ncm in the experimental group II, 49 Ncm in the experimental group I and 43 Ncm in the control. There was a statistically significant difference among 3 groups (p<0.05). These results suggest that electrical stimulation improve and accelerate bone healing around endosseous titanium implants in bone defect.

• Molecules and Cells
• /
• v.43 no.1
• /
• pp.66-75
• /
• 2020

Saturated fatty acids contribute to β-cell dysfunction in the onset of type 2 diabetes mellitus. Cellular responses to lipotoxicity include oxidative stress, endoplasmic reticulum (ER) stress, and blockage of autophagy. Palmitate induces ER Ca²⁺ depletion followed by notable store-operated Ca²⁺ entry. Subsequent elevation of cytosolic Ca²⁺ can activate undesirable signaling pathways culminating in cell death. Mitochondrial Ca²⁺ uniporter (MCU) is the major route for Ca²⁺ uptake into the matrix and couples metabolism with insulin secretion. However, it has been unclear whether mitochondrial Ca²⁺ uptake plays a protective role or contributes to lipotoxicity. Here, we observed palmitate upregulated MCU protein expression in a mouse clonal β-cell, MIN6, under normal glucose, but not high glucose medium. Palmitate elevated baseline cytosolic Ca²⁺ concentration ([Ca²⁺]_i) and reduced depolarization-triggered Ca²⁺ influx likely due to the inactivation of voltage-gated Ca²⁺ channels (VGCCs). Targeted reduction of MCU expression using RNA interference abolished mitochondrial superoxide production but exacerbated palmitate-induced [Ca²⁺]_i overload. Consequently, MCU knockdown aggravated blockage of autophagic degradation. In contrast, co-treatment with verapamil, a VGCC inhibitor, prevented palmitate-induced basal [Ca²⁺]_i elevation and defective [Ca²⁺]_i transients. Extracellular Ca²⁺ chelation as well as VGCC inhibitors effectively rescued autophagy defects and cytotoxicity. These observations suggest enhanced mitochondrial Ca²⁺ uptake via MCU upregulation is a mechanism by which pancreatic β-cells are able to alleviate cytosolic Ca²⁺ overload and its detrimental consequences.

• Journal of Digital Convergence
• /
• v.12 no.9
• /
• pp.237-244
• /
• 2014

Pathogenic fungal infections are predominantly occurred in patients with severe immune or metabolic defects. In the present study, we aimed to investigate the last five years (2007~2011) 190,250 cases clinical specimens of yeast 3,487 results that had shown positive culture and to look at the significance of regional difference and identify relationship between provide the characteristics about association between clinical isolates and gender, age, and type of specimens. The yearly strain-specific isolation frequency of yeast separated was 1,925(55.2%) for C. albicans the largest of them. All kinds of clinical specimen was 1,495(42.9%) in urine, 998(28.6%) in sputum. Strain-specific gender differences in C. albicans for males was 1,177(57.8%) of the total of 2,037 and 748(51.6%) of 1,450 and as for age, those between 70 and 79 were the largest with 639(55.1%) of the 1,925 strain. In this study, well presented the general characteristics of pathogenic yeast seen in diverse specimens. This limitation has been implemented in a single area, Future research is expected to examine more on nationwide distribution chart, dynamic characteristics and future antibiotic sensitivity.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.501-507
• /
• 2010

Formaldehyde responsive protein(FRP) 1 belongs to the family of universal stress protein(USP) and is known to respond to stress caused by fumigation of gaseous volatile organic compounds(VOCs) such as formaldehyde and toluene. However, the molecular function of this protein is not well understood at cellular and molecular level. In this study, loss of function mutant of FRP1 generated by T-DNA insertion(frp1-4) has been isolated from Arabidopsis thaliana and the function of FRP1 was characterized. The loss-of-function mutant of FRP1 appeared slight growth defects with shorter stem and rosette leaves compared to wild type. In addition, the damage caused by exogenous VOCs was more severe in frp1-4 than in control. Therefore, Arabidopsis FRP1 seems to be the protein involved not only in the growth and development of plant but also the stress resistance against toxic volatile organic compounds.

• Journal of Life Science
• /
• v.13 no.3
• /
• pp.241-247
• /
• 2003

While the DNA-protein kinase (DNA-PK) complex, comprised of DNA-PKcs and Ku80, is primary involved in the repair of DNA double-strand breaks, it is also believed to participate in additional cellular processes. Here, treatment of embryo fibroblasts (MEFs) derived from either wild-type (Wt) or DNA-PKcs-null (DNA-$PKcs^{-/-}$) mice with various stress inducing agents revealed that adriamycin was markedly more cytotoxic for $Ku80^{-/-}MEFs$ and led to their long-term accumulation in the $G_2$/M phase. This differential response was not due to differences in DNA repair, since adrimycin-triggered DNA damage was repaired with comparable efficiency in both Wt and $Ku80^{-/-}MEFs$, but was associated with differences in the expression of important cell cycle regulatory genes. Our results support the notion that Ku80-mediated cytoprotection and $G_2$/M-progression are not only dependent on the cell's DNA repair but also may reflect Ku80's influence on additional cellular processes such as gene expression.

• Applied Microscopy
• /
• v.39 no.3
• /
• pp.253-260
• /
• 2009

GM-CSF is a multipotent growth factor, which also plays an important role during the process of wound healing. rrhGM-CSF was specifically produced from rice cell culture in our laboratory (Hanson Biotech Co., Ltd, Daejeon). The rrhGMCSF contains more oligosaccharide side chains than any other types of GM-CSF. This work was taken to evaluate the influence on wound healing of rrhGM-CSF in male golden hamsters. Full thickness skin defects of 9 mm in diameter were made in the back of hamsters, and 100 ${\mu}L$ ointment containing rrhGM-CSF 50 ${\mu}g/mL$ was applied. Control groups were given ointment without rrhGM-CSF. The wound sizes were relatively reduced and skin was well regenerated in the experimental group compared with the control group. Structurally, reepithelialization and architecture of the skin following injury were well accomplished in the experimental group. And also, positive reaction of PCNA of the skin following injury was more prominent in rrhGM-CSF containing ointment treatment group. Since this type of GM-CSF has highly glycosylated side chains, the effectiveness might be retain longer and stable, regarding acceleration of wound healing in the animal model. The present study has important implications for further development of the therapeutic manipulation of wound healing using rrhGM-CSF.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.6
• /
• pp.1131-1139
• /
• 2020

The static analysis of the source code is to find the remaining security weaknesses for a wide range of source codes. The static analysis tool is used to check the result, and the static analysis expert performs spying and false detection analysis on the result. In this process, the amount of analysis is large and the rate of false positives is high, so a lot of time and effort is required, and a method of efficient analysis is required. In addition, it is rare for experts to analyze only the source code of the line where the defect occurred when performing positive/false detection analysis. Depending on the type of defect, the surrounding source code is analyzed together and the final analysis result is delivered. In order to solve the difficulty of experts discriminating positive and false positives using these static analysis tools, this paper proposes a method of determining whether or not the security weakness found by the static analysis tools is a spy detection through artificial intelligence rather than an expert. In addition, the optimal size was confirmed through an experiment to see how the size of the training data (source code around the defects) used for such machine learning affects the performance. This result is expected to help the static analysis expert's job of classifying positive and false positives after static analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.2
• /
• pp.193-201
• /
• 2021

The welding has a high proportion of the production and drying of ships or offshore plants. Non-destructive testing is carried out to verify the quality of welds in Korea, radiography test (RT) is mainly used. Currently, most shipyards adopt analog-type techniques to print the films through the shoot of welding parts. Therefore, the time required from radiography test to pass or fail judgment is long and complex, and is being manually carried out by qualified inspectors. To improve this problem, this paper covers a platform for scanning and digitalizing RT films occurring in shipyards with high resolution, accumulating them in management servers, and applying artificial intelligence (AI) technology to detect welding defects. To do this, we describe the process of designing and developing RT film scanning equipment, welding inspection information integrated management platform, fault reading algorithms, visualization software, and testing and verification of each developed element in conjunction.