• Proceedings of the KSPS conference
• /
• 2006.05a
• /
• pp.41-44
• /
• 2006

The purpose of state tying is to reduce the number of models and to use relatively reliable output probability distributions. There are two approaches: one is top down clustering and the other is bottom up clustering. For seen data, the performance of bottom up approach is better than that of top down approach. In this paper, we propose a new clustering technique that can enhance the undertrained triphone clustering performance. The basic idea is to tie unreliable triphones before clustering. An unreliable triphone is the one that appears in the training data too infrequently to train the model accurately. We propose to use monophone distance to preprocess these unreliable triphones. It has been shown in a pilot experiment that the proposed method reduces the error rate significantly.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.176-181
• /
• 2000

Stress intensity factors for a rigid line inclusion tying along a bimaterial interface are calculated by the boundary element method with the multiregion and double-Point techniques. The formula between the stress intensity factors and the inclusion surface stresses are derived. The numerical values of the stress intensity factors for the bimaterial interface rigid line inclusion in the infinite body are proved to be in good agreement within 3% when compared with the previous exact solutions. In the finite bimaterial systems, the stress intensity factors for the center and edge rigid line inclusions at interface are computed with the variation of the rigid line inclusion length and the shear modulus ratio under the biaxial and uniaxial loading conditions.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.17-20
• /
• 2001

본 논문에서는 분절 특징 HMM(SFHMM)의 매개변수를 줄이는 방법을 제안한다 SFHMM이 HMM보다 우수한 성능을 보이더라도, SFHMM의 매개 변수 수는 HMM보다 많기 때문에 매개 변수 수를 줄이는 방법에 대한 연구가 필요하다. 일반적으로 궤적(trajectory)은 경향(trend) 정보와 위치(location) 정보로 분리될 수 있다. 경향은 분절 특징의 변이를 나타내며, SFHMM 변수의 많은 부분을 담당하기 때문에, 경향 정보를 공유할 수 있다면 SFHMM의 매개 변수 수는 감소될 수 있을 것이다. 제안된 방법은 궤적의 경향 정보를 양자화(quantization)에 의하여 공유한다. 제안된 방법의 성능을 살펴보기 위하여 영어 데이터베이스인 TIMIT 자료를 사용하여 실험하였다. 실험 결과 제안된 방법의 성능은 기존 연구와 거의 유사하나, 궤적의 다양한 정보를 이용한다면 궤적 정보의 공유에 의하여 매개 변수를 줄일 수 있을 것으로 보인다.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.3
• /
• pp.83-94
• /
• 2005

This paper is to analyze patterns for Indonesian traditional textiles. Ikat is the resist-dyeing process in which designs are reserved in warp or weft yams by tying off small bundles of threads with fiber resists to prevent the penetration of dye. Batik is the technique applying a wax resist before dyeing to form a pattern in negative. Ikat and batik are the most renowned textile arts of Indonesia. Patterns are classified as geometric pattern, plant pattern, animal pattern. Also this paper discusses the origins of ikat and batik. Therefore this Paper proposes the classification and feature extraction of ikat and batik patterns. The results of this study can be effectively applied to develop competitive pattern design for Indonesian textile market.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.1
• /
• pp.29-33
• /
• 2004

In this paper, I'm tying to define the connection of the Device Characteristics and the Error Terms, and yield maximum estimated value of the mismatching errors by modeling the individual devices with signal-flow graph, and by seeking the transfer function of the system with the mismatching error in the combination of the devices using the Signal-flow Graph Gain Formula.

• Clinics in Shoulder and Elbow
• /
• v.8 no.2
• /
• pp.117-121
• /
• 2005

A secure slip knot is very important in the arthroscopic surgery of the shoulder joint. The new 'Hallym Slider', developed by the first author(KCN), has the properties of being a simple sliding and one-way locking knot. This technique can be performed alone without an assistant and has no accidental premature locking during the knot tying. The initial slip knot determines the adequacy of tissue approximation and consequent healing. The 'Hallym Slider' has excellent initial holding capacity, maintaining tension on soft tissue while additional half-hitches are being tied. It locks readily, it takes less time to tie than numerous square knots, and it is not as bulky as other knots. Therefore, we introduce this new sliding and one-way locking knot during the arthroscpic surgery of shoulder.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.467-474
• /
• 2002

Colluvial sell has a very unique deformation property, particularly when it is subject to the cutting work entailed in a variety of construction. In this study, the cut slope tying on a colluvial layer in which the transmission tower had been installed were investigated to find out the cause of deformation. In-situ tests such as boring, surface-wave analysis (MASW) were employed to look into the physical composition of underground layers and FEM including LEM were carried out to simulate the construction steps. The result shows that the stress relaxation followed by road construction induced the deformation of the slope and damage in the foundation of the transmission tower.

• Journal of KIEE
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2000

This paper represents the design of 3D endoscopic video system in order to improve visualization and enhance the ability of the surgeon to perform delicate endoscopic surgery. In comparison of the polarized and electric shutter-type stereo imaging system, The former is superior in terms of accuracy and performance speed for knot-tying and loop pass test. The result of experiments show that the proposed 3D endoscopy system has a wide viewing angle and zone which is necessary for multi-view and it has better image quality and stability of the optical performances than the electric shutter-type does.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06d
• /
• pp.60-63
• /
• 1998

본 논문에서는 사용자가 별도의 훈련과정 없이 인식대상 어휘를 추가 및 변경이 가능한 가변어휘 인식시스템에 관하여 기술한다. 가변어휘 음성인식에서는 미리 구성된 음소모델을 토대로 인식대상 어휘가 결정되명 발음사전에 의거하여 이들 어휘에 해당하는 음소모델을 연결함으로써 단어모델을 만든다. 사용된 음소모델은 현재 음소의 앞뒤의 음소 context를 고려한 문맥종속형(Context-Dependent)음소모델인 triphone을 사용하였고, 연속확률분포를 가지는 Hidden Markov Model(HMM)기반의 고립단어인식 시스템을 구현하였다. 비교를 위해 문맥 독립형 음소모델인 monophone으로 인식실험을 병행하였다. 개발된 시스템은 음성특징벡터로 MFCC(Mel Frequency Cepstrum Coefficient)를 사용하였으며, test 환경에서 나타나지 않은 unseen triphone 문제를 해결하기 위하여 state-tying 방법중 음성학적 지식에 기반을 둔 tree-based clustering 기법을 도입하였다. 음소모델 훈련에는 ETRI에서 구축한 POW (Phonetically Optimized Words) 음성 데이터베이스(DB)[1]를 사용하였고, 어휘독립인식실험에는 POW DB와 관련없는 22개의 부서명을 50명이 발음한 총 1.100개의 고립단어 부서 DB[2]를 사용하였다. 인식실험결과 문맥독립형 음소모델이 88.6%를 보인데 비해 문맥종속형 음소모델은 96.2%의 더 나은 성능을 보였다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.948-950
• /
• 2005

This paper compared the test data with the loss when a conductor is exposed to the magnetic fieldof reactors after generating external magnetic field in specimen by means of an air core reactor model and the calculation of loss came from a tying the combination of FEM and integral method. It was applied to the loss measurement of transformers due to leakage flux.