• 생태와환경
• /
• 제33권4호통권92호
• /
• pp.358-365
• /
• 2000

백련어의 도입 및 제거가 부영양호의 수중생물군집과 환경요인에 미치는 영향을 조사하였다. 생물조작을 위해 호수연안에 6개의 enclosure를 설치하고, 5월 22일부터 7월 23일까지(전기), 7월 23일부터 9월 18일까지(후기) 두 가지 밀도(고, 저)의 어류를 투입 및 제거하였다. RIA(${\alpha}$=0.05)의 결과는 어류도입 및 제거가 대부분의 생물군집 및 환경요인에 유의한 영향을 미치는 것으로 나타났다. 각 enclosure의 환경요인에 대해 어류투입은 투명도, 용존산소, 수소이온농도, 큰분획엽록소(>40 ${\mu}$m) 등의 감소와 질소화합물, 소형분획엽록소(<2 ${\mu}$m)의 증가를 유도하였으며, 어류제거는 정반대 현상을 보였다. 한편, 수중생물군집에 있어서, 어류투입은 picocyanobacteria이나 섬모충(<20 ${\mu}$m) 같은 소형 플랑크톤의 증가가 뚜렷하였고, 어류제거에 의해 다시 유의하게 회복하였다. 그러나 크고, 군체를 형성하거나 긴 사상체 남조나 규조등은 두 가지 어류조작에 유의한 변화를 보이지 않았으며, 어류제거시만 Diaphanosoma, Cyclopoida, naupli 등 동물플랑크톤의 유의한 증가를 나타냈다. 본 연구는 실험기간 동안 강한 바람과 호수바닥으로부터 지속적인 인의 공급 등으로 인하여 결과해석에 부정적으로 작용하였으나, 전체적으로 어류도입 및 제거가 enclosure내 플랑크톤군집과 환경요인에 대해 서로 상반되는 효과를 유도하는 것이 확인되었다.

• 한국환경농학회:학술대회논문집
• /
• 한국환경농학회 2009년도 정기총회 및 국제심포지엄
• /
• pp.3-18
• /
• 2009

It is difficult for consumers to satisfy high safety request with post-management method such as inspection and surveillance, as various changes in-and-out of the country associated with food safety. In terms of food safety problems related to foods, it is crucial to recognize public health and consumer protection and construct pre-preventive Food Control System. A joint committee, FAO/WHO made the following consultations to the National Food Safety System. ${\circ}$ Approach entirely from farm to table ${\circ}$ Get ready for Risk Analysis System ${\circ}$ Secure transparency ${\circ}$ Establish the optimal policy by evaluating the effect of regulation When it comes to summarizing the consultation, it would be accumulated as two key words; "Efficiency" and "Credibility". Whereas the problem of efficiency focuses on precaution rather than post-management, it requires policy option to maximize consumer's benefit by evaluating the cost for the Food Safety Management and its benefit. Also, analyzing risk's character and amount, demanding an optimal means, and introducing scientific analysis system put much value on the stakeholder's communications are procedure's security which can satisfy both "Efficiency" and "Credibility" simultaneously. Especially, it is emphasized here that Risk Assessment need to be separated from Risk Management. This action is a valid means of credibility security throughout improving transparency. A number of nations and organizations have reformed the method of food management passing through reflection and examination of the prior National Food Safety Management since BSE occurred in Britain, 1996. FSA; Food Standard Agency, AFFSA, EFSA, BfR, and FSC are Risk Assessment Organization functionally separated from Risk Management Organization, JECFA, JMCFA, JMPR, JEMRA in Codex charge Risk Assessment internationally. In case of advanced countries excluding several those such as The U.S. and so forth, though these Risk Assessment Organizations are either separated functionally within Risk Management Organization or operated as apart organ, common factors are in which it has independence as Science Base. While securing independence of Risk Assessment Function, it is a tendency Risk Management should be functionally unified into efficiency as well. Though Germany constructs integral Risk Management System of diverse ways according to social and political conditions of each country such as GFOCP, DVFA, SNFA, CFIS and AQIS, there is a key word in the center, "Securing efficiency of Food Safety Management". However our nation has a representative plural；diversified system with The U.S., we took a step forward for unification as empowering policy's generalization；adjustment and Risk Assessment Function by means of enacting the "Food Safety Fundamental Law" in 2008 and establishing the "Food Safety Policy Commission" with private and governmental sectors in the Prime Minister's office. Even though the unification of Risk Management hereby increased, there is the lack of strengthening function of Risk Assessment and securing independence. It needs to be required for the professional committee in Food Safety Policy Commission to develop as a exclusive office of Risk Assessment by separating from a policy decision. Administrative Branches should reinforce feeble functions such as fundamental investigation；research for carrying out Risk Assessment with securing efficiency throughout reassessment of prior Risk Management Means.

• 한국응용과학기술학회지
• /
• 제27권2호
• /
• pp.137-143
• /
• 2010

Oxide semiconductors Thin-film transistors are an exemplified one owing to its excellent ambient stability and optical transparency. In particular zinc oxide (ZnO) has been reported because It has stability in air, a high electron mobility, transparency and low light sensitivity, compared to any other materials. For this reasons, ZnO TFTs have been studied actively. Furthermore, we expected that would be satisfy the demands of flexible display in new generation. In order to do that, ZnO TFTs must be fabricated that flexible substrate can sustain operating temperature. So, In this paper we have studied low-temperature process of zinc oxide(ZnO) thin-film transistors (TFTs) based on silicon nitride ($SiN_x$)/cross-linked poly-vinylphenol (C-PVP) as gate dielectric. TFTs based on oxide fabricated by Low-temperature process were similar to electrical characteristics in comparison to conventional TFTs. These results were in comparison to device with $SiN_x$/low-temperature C-PVP or $SiN_x$/conventional C-PVP. The ZnO TFTs fabricated by low-temperature process exhibited a field-effect mobility of $0.205\;cm^2/Vs$, a thresholdvoltage of 13.56 V and an on/off ratio of $5.73{\times}10^6$. As a result, We applied experimental for flexible PET substrate and showed that can be used to ZnO TFTs for flexible application.

• 대한화장품학회지
• /
• 제47권1호
• /
• pp.1-7
• /
• 2021

전 세계적으로 자외선 차단제의 유효성 및 안전성에 대한 관심이 증가함에 따라 새로운 무기 자외선 차단제 개발에 대한 연구도 활기를 띄고 있다. 본 연구에서는 최근에 이슈화된 나노물질규제에 대응 가능한 나노 사이즈가 아닌 non-nano 막대형 산화아연을 합성하였고, 이를 세틸알코올로 표면처리한 막대형 산화아연분체를 개발하여 물리적 특성을 조사하였으며 자외선 차단제로서의 응용가능성을 평가하였다. 실험 결과, non-nano인 막대형 산화아연 분체를 적용한 선크림의 자외선 차단 효능과 백탁 정도는 40 nm 크기의 산화아연과 비슷한 결과를 나타냈으며, 막대형 산화아연 분산액을 사용한 선크림은 자외선 차단효능이 현저히 증가함을 확인하였다. 따라서 본 연구를 통해 개발된 막대형 산화아연 분체는 non-nano (200 nm)임에도 불구하고 투명성(백탁 개선), 자외선 차단 효능 그리고 사용감 측면에서 우수한 자외선 차단제로서 응용 가능성이 있음을 시사하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 추계학술대회
• /
• pp.505-508
• /
• 2022

인공지능은 존재 자체로서 기술의 약진이라는 가치를 가지며, 여러 산업 분야에 이용되어 각종 산업에서 생산하는 상품 및 서비스의 부가 가치를 증진시키는 역할을 한다. 따라서 인공지능과 관련된 규제와 정책에 대해서 보다 넓은 시각에서 고려되어야 한다. 그러나 연구자 간 이해도가 상이하며, 어떻게 인공지능을 규제할지에 대한 합의는 이뤄지지 않고 있다. 이에 인공지능 기술에 대한 정부규제 방향을 탐색적으로 고찰해 본다. 먼저 인공지능 규제의 목표로 책무성, 투명성, 안정성, 공정성을 도출하고 규제 범위로 시스템 자체, 개발과정 및 활용 과정을 설정하며, 이용자와 개발자가 규제의 준수 대상임을 보인다. 본 연구의 학술적 의의는 인공지능 현재 기술수준을 분석하여 이를 바탕으로 향후 일관된 인공지능 규제 논의의 기반을 마련한 것으로 볼 수 있다. 인공지능 개발에서 응용에 이르는 생애주기를 고려할 때, 중요한 것은 인공지능 산업을 촉진하기 위한 진흥 정책과 그에 따른 리스크에 대해 대응하는 규제 정책의 균형이다. 개발자, 기업 및 사용자 등 모든 참여 주체에게 긍정적인 방향으로 인공지능이 수용될 수 있는 체계를 마련하는 것이 인공지능과 관련된 법학의 목표이다.

• 접착 및 계면
• /
• 제11권4호
• /
• pp.174-180
• /
• 2010

다중벽탄소나노튜브를 표면처리하여 polymethylmethacrylate (PMMA) 기재에 첨가하여 제조한 고분자 복합재료에서 탄소나노튜브의 표면처리가 계면 및 열전도도에 미치는 효과를 고찰하였다. Coagulation 방법과 atomic transfer radical polymerization (ATRP) 방법을 사용하여 탄소나노튜브를 표면 처리 하여 사용하였으며, ATRP 방법을 적용하여 제조한 복합재료는 coagulation 방법을 사용하여 제조한 복합재료보다 높은 열전도도와 투과도를 가졌다. 순수 PMMA의 열전도도가 0.21 W/mK인데 비하여 ATRP 방법으로 처리한 1 wt%의 탄소나노튜브를 첨가하였을 경우 0.38 W/mK로 열전도도가 향상되었다. 탄소나노튜브와 PMMA기재의 계면을 주사전자현미경을 이용하여 관찰한 결과 탄소나노튜브의 표면처리에 의해 기재 내에 분산이 향상되고 고분자기재-탄소나노튜브 계면에서의 접촉이 용이해져 포논산란이 감소되어 광 투과성을 가지면서 열전도도가 향상된 것으로 보인다.

• 폴리머
• /
• 제36권6호
• /
• pp.745-755
• /
• 2012

Two types of polymers were tested in this study; poly(ethylene terephthalate) (PET) as a synthetic example and poly(lactic acid) (PLA) as a natural polymer. DSC analyses showed that the use of nanofiller increased the degree of crystallinity ($X_c$) of both PET and PLA polymers, but the effect was more noticeable on PET nanocomposites. The crystallization of PLA and PET nanocomposites occurred at higher temperatures in comparison to neat polymers. According to dynamic mechanical-thermal analysis (DMTA), the damping factor of PET/$TiO_2$ nanoparticles decreased compared to the neat matrix, but for PLA nanocomposites the opposite trend was observed. Results of the mechanical test showed that for both PET and PLA nanocomposites, the most successful toughening effect was observed at 3 wt% loading of $TiO_2$ nanoparticles. SEM micrographs revealed uniform distribution of $TiO_2$ nanoparticles at 1 and 3 wt% loading levels. The results of WAXD spectra explained that the polymorphs of PLA and PET was not affected by $TiO_2$ nanoparticles. UV-visible spectra showed that $TiO_2$ nanocomposite films had high ultraviolet shielding compared to neat polymer, but there was significant reduction in transparency.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.289.2-289.2
• /
• 2016

In-Ga-Zn-O(IGZO) receive great attention as a channel material for thin film transistors(TFTs) as next-generation display panel backplanes due to its superior electrical and physical properties such as a high mobility, low off-current, high sub-threshold slope, flexibility, and optical transparency. For the purpose of fabricating high performance IGZO TFTs, a thermal recovery process above a temperature of $300^{\circ}C$ is required for recovery or rearrangement of the ionic bonding structure. However diffused metal atoms from source/drain(S/D) electrodes increase the channel conductivity through the oxidation of diffused atoms and reduction of $In_2O_3$ during the thermal recovery process. Threshold voltage ($V_{TH}$) shift, one of the electrical instability, restricts actual applications of IGZO TFTs. Therefore, additional investigation of the electrical stability of IGZO TFTs is required. In this paper, we demonstrate the effect of Ti diffusion and modulation of interface traps by carrying out an annealing process on IGZO. In order to investigate the effect of diffused Ti atoms from the S/D electrode, we use secondary ion mass spectroscopy (SIMS), X-ray photoelectron spectroscopy, HSC chemistry simulation, and electrical measurements. By thermal annealing process, we demonstrate VTH shift as a function of the channel length and the gate stress. Furthermore, we enhance the electrical stability of the IGZO TFTs through a second thermal annealing process performed at temperature $50^{\circ}C$ lower than the first annealing step to diffuse Ti atoms in the lateral direction with minimal effects on the channel conductivity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.237.1-237.1
• /
• 2016

Electrical properties of graphene-based field effect transistors (G-FETs) can be degraded in ambient conditions owing to physisorbed oxygen or water molecules on the graphene surface. Passivation technique is one of a fascinating strategy for fabrication of G-FETs, which allows to sustain electrical properties of graphene in the long term without disrupting its inherent properties: transparency, flexibility and thinness. Ironically, despite its importance in producing high performance graphene devices, this method has been much less studied compared to patterning or device fabrication processes. Here we report a novel surface passivation method by using atomically thin self-assembled alkane layers such as C18- NH2, C18-Br and C36 to prevent unintentional doping effects that can suppress the degradation of electrical properties. In each passivated device, we observe a shift in charge neutral point to near zero gate voltage and it maintains the device performance for 1 year. In addition, the fabricated PG-FETs on a plastic substrate with ion-gel gate dielectrics exhibit not only mechanical flexibility but also long-term stability in ambient conditions. Therefore, we believe that these highly transparent and ultra-thin passivation layers can become a promising candidate in a wide range of graphene based electronic applications.

• 한국재료학회지
• /
• 제19권2호
• /
• pp.108-110
• /
• 2009

Transparent Sn-doped $In_2O_3$ (ITO) single-layer and ITO/Au/ITO multilayer films were deposited on glass substrates by reactive magnetron sputtering to compare the properties of the films. They were then annealed in a vacuum of $1{\times}10^{-2}\;Pa$ at temperatures ranging from 150 to $450^{\circ}C$ for 20 min to determine the effect of the annealing temperature on the properties of the films. As-deposited 100 nm thick ITO films exhibit a sheet resistance of $130{\Omega}/{\square}$ and optical transmittance of 77% at a wavelength length of 550 nm. By inserting a 5 nm-thick Au layer in ITO/metal/ITO (IMI) films, the sheet resistance was decreased to as low as $20{\Omega}/{\square}$ and the optical transmittance was decreased to as little as 73% at 550 nm. Post-deposition annealing of ITO/Au/ITO films led to considerably lower electrical resistivity and higher optical transparency. In the Xray diffraction pattern, as-deposited ITO films did not show any diffraction peak, whereas as-deposited ITO/ Au/ITO films have Au (222) and $In_2O_3$ (110) crystal planes. When the annealing temperature reached the 150 - $450^{\circ}C$ range, the both diffraction peak intensities increased significantly. A sheet resistance of $8{\Omega}/{\square}$ and an optical transmittance of 82% were obtained from the ITO/Au/ITO films annealed at $450^{\circ}C$.