• 대한수의학회지
• /
• 제60권1호
• /
• pp.15-18
• /
• 2020

Canine heartworm disease is a vector-borne disease that is transmitted from dog to dog by mosquitoes. It causes epidemics that disrupt the health environments of dogs and are burdensome for many dog owners. Recent trends of changing temperatures and weather conditions in South Korea may have an impact on the population of mosquitoes, and it affects the population of dogs at risk of heartworm infection. Mathematical modeling has become an important measure for analyzing the epidemiological characteristics of infectious diseases. However, canine heartworm infection transmission has not been reported yet through mathematical modeling. We develop a mathematical model of canine heartworm infection to predict the population of infected dogs depending on the vector (mosquito) population using a susceptible, exposed, infected, and recovered model. Simulation results show that after 1 year, 3,289 dogs out of 73,602 (about 4.5%) are exposed and 134 (about 0.2%) are infected. Only 0.2% of susceptible dogs become infected after 1 year. However, if all exposed dogs are maintained in the same circumstances without any treatment, then the number of infected subjects will increase over time. This may increase the possibility of other dogs, especially dogs that live outside, being infected.

• 한국산업융합학회 논문집
• /
• 제23권6_1호
• /
• pp.907-915
• /
• 2020

Specification selection, Layout, specifications and combinations of Power Drives, and Ship motions were studied for FGPP(Floating Gas-fired Power Plants), which are still needed in areas such as the Caribbean, Latin America, and Southeast Asia where electricity is not sufficiently supplied. From this study, the optimal equipment layout in ships was derived. In addition, the difference between engine and turbine was verified through LCOE(Levelized Cost of Energy) comparison according to the type and combination of Power Drives. Analysis of Hs(Significant Height of wave) and Tp(spectrum Peak Period of wave) for places where this FGPP will be tested or applied enables design according to wave characteristics in Brazil and Indonesia. Normalized Sloshing Pressures of FGPP and LNG Carrier are verified using a sloshing analysis program, which is CFD(Computational Fluid Dynamics) software developed by ABS(American Bureau of Shipping). Power Transmission System is studied with Double bus with one Circuit Breaker Topology. A nd the CFD analysis allowed us to calculate linear roll damping coefficients for more accurate full load conditions and ballast conditions. Through RAO(Response Amplitude Operator) analysis, we secured data that could minimize the movement of ships according to the direction of waves and ship placement by identifying the characteristics of large movements in the beam sea conditions. The FGPP has been granted an AIP(Approval in Principle) from a classification society, the ABS.

• Journal of Veterinary Science
• /
• 제23권3호
• /
• pp.37.1-37.8
• /
• 2022

Background: Avian pathogenic Escherichia coli (APEC) causes colibacillosis, resulting in significant economic losses in the poultry industry. Objectives: In this study, the molecular characteristics of two extended-spectrum beta-lactamase (ESBL)-producing APEC isolates were compared with previously reported ESBL-producing E. coli isolates. Methods: The molecular characteristics of E. coli isolates and the genetic environments of the ESBL genes were investigated using whole genome sequencing. Results: The two ESBL-producing APEC were classified into the phylogenetic groups C and B1 and ST410 and ST162, respectively. Moreover, the ESBL genes of the two isolates were harbored in different Inc plasmids. The EC1809182 strain, harboring the bla_CTX-M-55 gene on the plasmid, exhibited extensive homology to IncFIB (98.4%) and IncFIC(FII) (95.8%). The EC1809191 strain, harboring the bla_CTX-M-1 gene, was homologous to IncI1-I (Gamma) (99.3%). All chromosomes carried the multidrug transporter, mdf(A) gene. Mobile genetic elements, adjacent to CTX-M genes, facilitated the dissemination of genes in the two isolates, analogous to other ESBL-producing E. coli isolates. Conclusions: This study clarifies the transmission dynamics of CTX-M genes and supports strengthened surveillance to prevent the transmission of the antimicrobial-resistant genes to humans via the food chain.

• 한국소음진동공학회논문집
• /
• 제23권3호
• /
• pp.240-248
• /
• 2013

자동차 수동변속기 내 래틀과 같은 회전체 진동은 엔진 연소폭발 주기와 연동하여 발생한다. 이러한 충격형 진동 특성은 선형 시간 불변 분석법을 적용하여 살펴볼 수 있다. 기어의 동적 특성을 이해하기 위해, 특정 형태의 앞 바퀴 굴림 방식 수동 변속기에 대한 연구를 수행하였다. 첫째, 동특성 고유값과 주파수 응답함수를 기반으로 자유도를 줄이는 방법을 제시하였는데, 이는 행렬의 크기를 줄이는 효과적인 역할을 한다. 둘째, 단일 질량 플라이휠과 이중 질량 플라이휠의 동적 특성을 비교하였다. 모빌리티 분석을 기반으로 한 이중 질량 플라이휠의 효과를 검토하였는데, 이로부터 진동에 의해 가진되는 충격을 회피하기 위한 기본 개념을 이해 할 수 있다. 마지막으로, 두 단계 클러치 댐퍼로부터 유효 강성 값을 도출하여 선형 불변형 시스템 모델을 연구하였다. 두 단계의 서로 다른 클러치 강성조합을 이용하여 클러치 댐퍼의 동적특성에 대한 관계를 예측할 수 있다.

• Tribology and Lubricants
• /
• 제30권2호
• /
• pp.71-76
• /
• 2014

As the importance of transmission efficiency to reducing fuel consumption and conserving the environment rapidly increases, reducing the drag torque in an automotive wet clutch is emerging as an important issue in the automotive industry. The drag torque in a clutch occurs from viscous drag generated by automatic transmission fluid in the narrow gap between separate friction plates. In this study, the drag torques in an automotive wet clutch are investigated with respect to the angle and density of the grooves between separate friction plates by three-dimensional finite element simulation of a single set of wet clutch disks considering the two-phase flow of air and oil. The simulation results shows that the drag torque generally increases with the rotational speed to a critical point and then decreases at the high-speed regime. The grooves between the plates plays an important role in reducing the drag peak, and the inclined angle of the grooves affects the oil flow. The grooves with an angle of $50^{\circ}$ shows the lowest drag torques at both low and high speeds. The flow vectors inside the $50^{\circ}$ grooves shows clear evidence that the fluid flows out more easily from the grooves compared with the flow vectors inside grooves with lower angles. The simulation results shows that increasing the number of grooves (density of grooves) decreases the drag torque.

• Parasites, Hosts and Diseases
• /
• 제53권3호
• /
• pp.355-359
• /
• 2015

Hydatid disease imposing serious threat on human health and great loss in live-stock pastoralism remains a major public health problem in western China. To assess and monitor the effect of control program on transmission dynamics, we used the prevalence of cystic echinococcosis in slaughtered sheep at slaughterhouse as an indicator during the period of 2007 to 2013 in Emin County, Xinjiang Uygur Autonomous Region, China. The results showed a significant decline trend of prevalence in all age groups during the 7 years when the control program was implemented; particularly, the rate was reduced by 72% after first 3 years. Among the sheep slaughtered, the age distribution evidenced that the prevalence increased significantly as the sheep grew older. The baseline data indicated that the rate was 4.5% at the age <1, 6.7% at age 2~, and reached to the highest 17.9% at age ${\geq}4$ years. Earlier response to the intervention pressure was seen in the sheep at the younger age. Significant decline started from 2008 at the age <1, from 2009 at age of 1~, 2010 at 2~ to 3~, and the latest, in 2012 at age ${\geq}4$. This study demonstrated that the prevalence of cystic echinococcosis in slaughtered sheep may be used as an indicator to assess and monitor the transmission status during and after control program providing information for betterment of performance to sustain control strength.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.882-888
• /
• 2002

In this paper, an algorithm to increase the shift speed is suggested by increasing the line pressure for a metal belt CVT. In order to control the shift speed, an algorithm to calculate the target shift speed is presented from the modified CVT shift dynamics. In applying the shift speed control algorithm, a criterion is proposed to prevent the excessive hydraulic loss due to the increased line pressure. Simulations are performed based on the dynamic models of the hydraulic control valves, powertrain and the vehicle. It is found from the simulation results that performance of the engine operation can be improved by the faster shift speed, which results in the improved fuel economy by 2% compared with that of the conventional electronic control CVT in spite of the increased hydraulic loss due to the increased line pressure.

• 대한수학회지
• /
• 제54권3호
• /
• pp.987-997
• /
• 2017

A deterministic model for the spread of pine wilt disease with asymptomatic carrier trees in the host pine population is designed and rigorously analyzed. We have taken four different classes for the trees, namely susceptible, exposed, asymptomatic carrier and infected, and two different classes for the vector population, namely susceptible and infected. A complete global analysis of the model is given, which reveals that the global dynamics of the disease is completely determined by the associated basic reproduction number, denoted by $\mathcal{R}_0$. If $\mathcal{R}_0$ is less than one, the disease-free equilibrium is globally asymptotically stable, and in such a case, the endemic equilibrium does not exist. If $\mathcal{R}_0$ is greater than one, the disease persists and the unique endemic equilibrium is globally asymptotically stable.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.45-53
• /
• 1998

Traction control systems(TCS) improve vehicle acceleration performance and stability, particularly on slippery roads through engine torque and/or brake torque control. This research mainly deals with the engine control algorithm based on adjustment of the engine throttle valve opening. Hardware-in-the-loop simulation(HWILS) is carried out where the actual hardware is used for the engine/automatic transmission and TCS controller, while various vehicle dynamics are simulated on real-time basis. Also, use of the dynamometer is made in order to implement the tractive force that a road applies to the tire. Although some restrictions are imposed mainly due to the capability of the synamometer, simplified HWILS results show that the slip control algorithm can improve the vehicle acceleration performance for low-friction roads.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.410-413
• /
• 2004

In this paper, a simulator system for Fuel Cell Hybrid Electric Vehicles(FCHEV) is implemented using DSP boards with CAN bus. The subsystems of a FCHEV i.e., the fuel cell system, the battery system, the vehicle dynamics with the transmission mechanism are coded into 3 DSP boards. The power distribution control algorithm and battery SOC control are also coded into a DSP board. The real-time monitoring program is also developed to examine the control performance of power control and SOC control algorithms.