• Journal of Korean Society of Transportation
• /
• v.32 no.3
• /
• pp.187-197
• /
• 2014

The objective of this study is to analyze the travel behaviors of customers accessing to three different types of shopping facilities - traditional markets(TM), hyper markets(HM), and super supermarkets(SSM) - and also to find out the most desirable location for each type of shopping facilities that encourage sustainable transportation and smart urban growth. It also demonstrates what mode has the highest percentage of modal split and what is the access distance for public transport mode by each shopping facilities (SSM: 84.5% walking and 667m, TM: 20.1% bus and 1.6km, HM : 46.2% private car and 4.2km). Among TM, HM, and SSM, statistically significant differences are found in terms of mode choices and other associated travel behaviors. The research findings are expected to contribute to finding future urban planning and transportation solutions that promote walking and public transit uses for shopping trips and thus help support green transportation and sustainable urban growth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.136-142
• /
• 2018

Additive manufacturing process technology, known as the 3D printing process, is expanding its utilization from simple model realization to commercialized part production based on continuous material development. Recently, research and development have been actively carried out to fabricate lightweight and high-strength parts using polymers, such as polyamide (polyamide), which is a high-strength engineering plastic material. In this study, the Izod impact characteristics were analyzed for polyamide 12 (PA12) materials. For the specimen production, selective laser sintering process technology, which has excellent mechanical properties of finished products, was applied. In addition, PA12 and glass bead reinforced PA12 materials were produced. The specimens were classified according to the production direction on the production platform, and each specimen was subjected to an Izod test at test temperatures of $-25^{\circ}C$, $25^{\circ}C$, and $60^{\circ}C$. As a result, the impact strength of PA12 and glass bead-reinforced PA12 of vertical direction specimens were 48.8% and 16.3% lower than those of the parallel specimens at a $25^{\circ}C$ test temperature and the impact strength of parallel specimens was improved by 46.5% and 20.4% at a test temperature of $60^{\circ}C$ compared to that at $-25^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.270-276
• /
• 2020

3D printing is an additive manufacturing technology that can produce complex shapes in a single process for a range of materials, such as polymers, ceramics, and metals. Recent 3D printing technology has developed to a level that enables the mass-production through an improvement of the printing speed and the continuous development of applicable materials. In this study, 3D printing technology using a laser was applied to manufacture a heat exchanger for an air compressor in a railway vehicle. First, the optimal design of the heat exchanger was carried out by focusing on weight reduction and compactness as a shape suitable for 3D printing. Based on the design derived, heat exchanger prototypes were made of AlSi10Mg alloy material by applying the SLM technique. Moreover, the manufactured prototypes were attached to an existing air compressor, and the heat exchange performance of the compressed air was tested. The test results of the 3D printed prototypes showed a heat exchange performance of approximately 80% and 85% at low and high-pressure, respectively, compared to the existing heat exchanger. From the 𝓔-NTU method results with an external cooling air condition similar to that of the existing heat exchanger, the calculated heat transfer amount of 3D printed parts showed similar performance compared to the existing heat exchanger. As a result, the 3D printed heat exchanger is lightweight with good performance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.3
• /
• pp.278-285
• /
• 2016

The key features of maritime accidents are the change of their attributes by new risks from time to time. To prevent maritime accidents in Korea, the impacts by new risks on domestic safety environments should be identified or predicted. The purpose of this paper is to find the hazard factors by new risks on maritime safety in Korea. The meaning of new risks is the elements of accident hazard which is compiled from new or rare or unprecedented events in the worldwide maritime transportations. The problems of new risks are the lacks of optimum countermeasures to mitigate accident risks. Using the questionnaires with 152 event scenarios classified by 20 accident causes, the hazard identification and risk analysis of new risks was performed based on the Formal Safety Assessment (FSA) by IMO. A total of 22 Influence Diagrams, which is to depict the transit flows between accident causes to consequences, is used in the construction of 152 event scenarios. A total of 20 accidents causes is the same contents as the causation factors represented in Statistical Year Book for Maritime Accidents of Korean Maritime Safety Tribunals. After defining the evaluation equations to the response results of questionnaires by 46 experts, the work for risk analysis is carried out. As results from the analysis of 152 scenarios, it is known that the root cause to affect on maritime safety in Korea is the pressure of business competition and it led to the lacks of well experienced crews, the overload of vessel operations and crew's fatigue. In addition, as results from the analysis of 20 accident causes, the three accident causes are to be candidate as main issues in Korea such as the inadequate preparedness of departure, the neglecting of watch keeping in bridge and the inadequate management of ship operations. All of the results are thought to be as basic hazard factors to safety impediments. It is thus found that the optimum Risk Control Options to remove the hazard factors and to mitigate consequences required are the following two factors: business competition and crewing problems.

• Journal of the Korean Regional Science Association
• /
• v.35 no.3
• /
• pp.59-76
• /
• 2019

This study aims to develop urban scenarios for future cities and validate the future city scenarios using a Delphi method. The scenarios of future city was derived from urban structure, land use, transportation, and urban infrastructure and development using big data analysis, environmental scanning techniques, and literature review. The Delphi survey interviewed 24 erudite scholars and experts across 6 nations including Korea, USA, UK, Japan, China, Australia and India. The Delphi survey structure was designed to test future city scenarios, verified by the 5-point Likert scale. The survey also asked the timing of each scenario likely happens by the three terms of near-future, mid-future and far-future. Results of the Delphi survey reveal the following points. Firstly, for the future urban structure it is anticipated that urban concentration continues and higher density living in global mega cities near future. In the mid-future small and medium size cities may decrease. Secondly, the land use pattern in the near-future is expected of increasing space sharing and mixed or layered vertical land-use. In addition underground space is likely to be extended in the mid-future. Thirdly, in the near-future, transport and infrastructure was expected to show ICT embedded integration platform and public and private smart transport. Finally, the result of Delphi survey shows that TOD (Transit Oriented Development) becomes a development norm and more emphasis on energy and environment fields.

• Journal of Animal Science and Technology
• /
• v.56 no.3
• /
• pp.8.1-8.6
• /
• 2014

Background: Artificial insemination (AI) can serve as a powerful tool to the sheep owners for making rapid genetic progress of their flock. The AI in sheep is mostly performed using fresh semen with two reasons i) lambing rate following trans-cervical AI with frozen semen is limited by the inability of frozen-thawed sperm to transit the cervix and ii) the need of circumventing the cervical barrier through laparoscope aided intrauterine AI. Therefore, AI with frozen-thawed semen is not as widespread in sheep as it is in other domestic species. However, to get maximum benefits through the use of AI, frozen-thawed semen is a prerequisite because instead of high fertility, the short shelf life of fresh semen coupled with a limitation on the number of insemination doses achievable per unit time restricts the widespread use of individual sires. Therefore, in order to enhance lambing rate, a total of 240 trans-cervical artificial inseminations with frozen-thawed semen were performed in Bharat Merino ewes during autumn season either once in the evening (G-I, 10 h after onset of estrus, n = 100) or twice (G-II, 14 h and 22 h after onset of estrus, n = 140) i.e. once in the morning and again in the evening. Results: The pregnancy rate (proportion of pregnant ewes confirmed by ultrasonography at day 40) and lambing rate (proportion of ewes lambed) were higher in G-II as compared to G-I (26.4 vs 20% and 19.3 vs 10%, respectively). The difference in lambing rates was statistically (P < 0.05) significant. The depth of insemination within cervico-uterine tract had no significant effect on pregnancy and lambing rates. Conclusions: The results indicate that lambing rate in sheep following TCAI with frozen-thawed semen was significantly influenced by time of inseminations. Two inseminations after 14 and 22 h of onset of estrus enhanced the lambing rates of Bharat Merino sheep as compare to single insemination after 10 h of onset of estrus. The TCAI technique with frozen-thawed ram semen is promising and may serve as a valuable tool for genetic improvement of sheep breeds. Research efforts are going on worldwide to overcome the poor fertility following TCAI with frozen-thawed semen.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.802-809
• /
• 2017

3D printing technology is a manufacturing process for products, in which polymer and metal materials are laminated to form structures. It is advantageous for manufacturing parts requiring a high degree of design freedom and functionality. In addition, it would be a suitable technology for the production of parts for railway vehicles in the future, due to the need to produce parts in small quantities. In order to fully exploit the advantages of 3D printing technology, it is necessary to consider the process characteristics during the design of the product. In this study, the redesign and manufacturing technology of the product considering the performance and process conditions were studied for the heat exchanger in the air compressor of railway vehicles, as a trial application of the 3D printing technique. First of all, the design concept to improve the performance of the heat exchanger was defined, and the design range was specified to satisfy the performance of the present heat exchanger analyzed experimentally. Then, the detailed design was revised considering the characteristics of the metal 3D printing process, such as the manufacturing restrictions and production time. Based on the final design, the product was fabricated by the 3D printing process using aluminum material, and it was confirmed that the dimensional accuracy was satisfied. The weight of the final product was reduced by 41% compared with the existing products. The results of this study will make it possible to develop an efficient product design process for 3D printing technology.

• Journal of Nutrition and Health
• /
• v.25 no.6
• /
• pp.450-460
• /
• 1992

The study was performed to investigate the effect of corn bran as a fiber source on the utilization of thiamin niacin and pantothenic acid in human subjects for 8 weeks. Four different corn bran diets were fed : dry milled fine(DF) dry milled coarse(DC) wet milled fine(WF) and wet milled coarse(WC) Basal diet no corn bran bread added was employed as a control Apparent recovery of each B complex vitamin in urine was estimated to evaluate the vitamin and compared. The utilziation of three B vitamins was affected by the corn bran treatment. Dry milled corn bran had a higher recovery rate of thiamin(dry milled : 233% wet milled : 1.70%) than those receiving wet milled corn bran. Similar recovery pattern of niacin(dry milled : 1.94% wet milled : 1.50%) to that of thiamin was also observed. Particle size seemed to affect the vitamin utilization regardless of type of corn bran. Coarse bran gave a lower recovery value than fine corn bran in genreral. For pantothenic acid the recovery of the vitamin was affected to a greater extent by particle size of corn bran than by type of corn bran milling(fine: 60.22% coarse : 51.51%) Groups consuming wet milled corn bran\ulcorner(5`.57%) excreted more NDF than those fed dry milled corn bran(42.29%) Dry milled corn bran showed little or no water holding capacity poor fecal bulking properties and increased fecal transit time. The results suggest that corn bran supplementation exerts an negative effect on three B vitamin utilization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.469-475
• /
• 2010

The railway signalling system plays an essential role in the safe and efficient train operation as serving control functions of train operation intervals and train routes. The reliability and safety of the system are very important because the failure of the railway signalling system can lead to train collision or derailment as well as train operation stop. Until now, in railway signalling system the conventional wayside signal mode has been used generally. There are, however, the risk of accidents such as human mistakes caused by that the driver identifies the signal lamp status and controls train speed with the naked eye. It is also necessary to refurbish the obsolete system. Thereby, It is being effective that the onboard signal mode has been recently introduced and applied in order to transmit the speed control information to train by using the computer and communication equipment. It is necessary to switch over the system in a way while providing passengers with an operation service to replace the obsolete signal system. In this paper, we verify the cases through trial assessment which are solved by the way of adding specific functionalities in the problems of interference among the procedure of switch-over processes and a serial of processes for system verification while a train is operated in the new system in parallel to the existing system.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.10 no.1
• /
• pp.1394-1408
• /
• 1968

The tidal discharge is defined as the quantity of water flowing through a certain cross-section per unit of time, in contrast to river discharges, tidal discharges change periodically in magnitude and direction. Thus the total volumes of water flowing into again out of the system-called flood volume and ebb volume, respectively, depend on both the tidal and the river discharges. To ditermine the tidal discharge and the flood and ebb volumes of the Yong-san river, the discharges were measured at spring, mean and neap tide and simultaneous gage reading were taken at Samhak-do, Lower Myo-do, Myongsan-ni and Naju. The general procedure for measuring the tidal discharges was as follows. First, several cross-sections were measured and one of them was chosen. First, several cross-sections were measured and one of them was chosen. Then verticals were serected in the chosen cross section. Because comparatively few verticals should be representative of the discharge distribution over the river profile, the selection was done in accordance with the somtimes irregular bottom profile. The velocities were measured with the same current meters. The observations which included water level readings were continued for a period of about 13 hours. The current direction meter, a pyramid shaped resistance body, suspend in the water on a thin wire. The bubble in a circular tilting level fixed to the wire indicates the direction of the current. Reading were taken at intervals of 1m for depths of 10m or less, and for depths over 10m at intervals of 2m, going downwards and upwards. The averages of the two velocities were used for the computation of the discharges. The discharges and the flood and ebb volumes were ditermined by a graphical method. The mean velocities, corrected for their direction when necesary, were ditermined for each time interval and each vertical, and these velocities were plotted against the time. The resulting curves show possible mistakes very clearly, and the effect of observation errors could be reduced. The corrected velocities read from the curve at half-hour intervals were multiplied by the depth at the virtical at the corresponding time. The discharges thus found were ploted against the position of the vertical in the transit and joined by a smooth curve, integration of the curve rendered the total discharges as they occurred of half-hour intervals. Plotting these total discharges against the time yeilded during the day. The flood and ebb volumes were obtained by integration of the total discharge curve.