• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.406-411
• /
• 2011

An active application of tram is being expected in Korea in the near future. For the tram operation in urban area, the embedded rail tracks where rails are completely embedded with pavements is required. When the embedded rail track is constructed on fine-grained subgrade soil, excessive cumulative plastic settlements due to repetitive tram road may occur. In this study, repetitive load tests were carried out to evaluate the accumulative plastic settlements of subgrade soils underneath embedded rail tracks. Two real-scale track specimens of 5 m lengths were constructed considering the maximum cant of a curved line. Repetitive tram loads of three million times were applied to the tracks in 5 Hz frequency. The accumulating patterns of plastic settlements were analyzed. Tram load distributing effects of the concrete slabs were also evaluated using the measured data of earth pressures cells that were installed underneath track. Also the measured settlements were compared with the estimated settlements calculated from an existing experimental equations, and its validity is discussed.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.872-880
• /
• 2011

In terms of accessibility and time the tram rail and bus transportation system is equipped with all the benefits of. In addition, construction and operating costs than light rail trams reduce AGT, and by car from the city center by inhibiting the transport demand management, pedestrian-oriented transportation system, including city jaebuheung can expect several effects, depending on the expected introduction of trams are. Accordingly, increasing interest in streetcars and trams, and the forum is running and the green at the National Assembly, Korea Railroad Research Institute samurai tram lines in the Korean research team developed the tram is thriving. In this study, in Korea as a way to introduce a tram tram to enhance the safety and reliability challenges for the advancement and promotion of foreign tram with the safety regulations and accident cases learn safety measures to strengthen the domestic transportation. The expected introduction of the tram fits the matter at issue and the perception of citizens and the passengers can make changes to present policies, the successful national introduction of trams and safety study aims to review.

• Structural Engineering and Mechanics
• /
• v.75 no.4
• /
• pp.435-444
• /
• 2020

Ultrasonic guided wave testing is a very promising non-destructive testing method for rails, which is of great significance for ensuring the safe operation of railways. On the basis of the semi-analytical finite element (SAFE) method, a analytical model of 59R2 grooved rail was proposed, which is commonly used in the ballastless track of modern tram. The dispersion curves of ultrasonic guided waves in free rail and supported rail were obtained. Sensitivity analysis was then undertaken to evaluate the effect of rail elastic modulus on the phase velocity and group velocity dispersion curves of ultrasonic guided waves. The optimal guided wave mode, optimal excitation point and excitation direction suitable for detecting rail integrity were identified by analyzing the frequency, number of modes, and mode shapes. A sinusoidal signal modulated by a Hanning window with a center frequency of 25 kHz was used as the excitation source, and the propagation characteristics of high-frequency ultrasonic guided waves in the rail were obtained. The results show that the rail pad has a relatively little influence on the dispersion curves of ultrasonic guided waves in the high frequency band, and has a relatively large influence on the dispersion curves of ultrasonic guided waves in the low frequency band below 4 kHz. The rail elastic modulus has significant influence on the phase velocity in the high frequency band, while the group velocity is greatly affected by the rail elastic modulus in the low frequency band.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2297-2302
• /
• 2010

The status and effectiveness of Bi-modal Tram is analyzed through the comparison of the transport effectiveness and operation cost between the public transportation systems (bus, light rail transit) considering the vehicle and operation characteristic of new transit system Bi-modal Tram. The standard operation schedule is established in consideration of the vehicle specification and operation characteristic of main public transportation modes, and then the annual average operation cost is estimated depending on the volume, speed, analysis length for respective public transportation mode. Through analyzing the operation cost and distribution characteristic of public transportation modes depending on the transport volume and travel speed, the operational efficiency suitable for the city is derived. It is concluded that the operational efficiency of Bi-modal Tram is superior to that of the bus and light rail transit on the aspect of travel volume and operation speed.

• Journal of the Korean Society for Railway
• /
• v.18 no.3
• /
• pp.212-222
• /
• 2015

The characteristics of noise emission from tram systems should be investigated in order to design and construct an urban tram network that raises fewer environmental noise problems. In this paper, the characteristics of rolling noise from a tram were studied and a desired stiffness of the rail supports was proposed using a noise prediction model. The mobilities of embedded rails and resilient wheels were predicted using the Timoshenko beam model and the finite element model, respectively. The predicted mobilities were compared with the measured results. Compared with the measured values, the calculated noise level near the track showed small errors for frequencies higher than 300 Hz. Then, the source strengths of rail and wheel components were examined by varying the rail supporting stiffness and the slab supporting stiffness so that suitable stiffness values could be estimated that would reduce noise radiated from rails and wheels but that would not greatly increase the ground vibration.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.699-700
• /
• 2008

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.143-154
• /
• 2012

The wireless low-floored tram is an innovative transportation system which is environment-friendly and highly energy-efficient. In addition, the system has various advantages such as low construction cost, improvement of urban landscape, revitalization of surrounding commercial area, elevated convenience for passengers, etc. Therefore, more than ten local governments have proposed tram construction projects in Korea. Accordingly, many research and development projects are ongoing funded by government including the developments of tram vehicle, tram trackway, signal system, etc. The embedded rail system are commonly used in order to provide leveled roadway surface in urban area. It is effective to reduce the noise and vibration, caused at the interface between the wheel and track, to minimize the construction period, and to lower the maintenance cost. This paper investigated the design and construction processes for tram trackway and figured out the constructability for the test track with embedded rail system for the first time in Korea. The performance to reduce the noise and vibration were quantitatively measured in the test track with embedded rail system. In addition, the results were compared to the ones for track with conventional rail system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.821-822
• /
• 2007

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.1067-1075
• /
• 2009

The Bimodal Tram being developed in Korea is a new transit system that provides both benefits of rail and bus systems in terms of accessibility and fixed time schedule. This study accomplished a feasibility study for introducing the Bimodal Tram system by considering the travel demand and existing transit system at a city level based on its population. The feasibility of Bimodal Tram system varies depending on cities with respect to demographic scale, mode shares, and operational distances. The strategies introduced here will help any cities where transport agencies are trying to introduce the Bimodal Tram as a new transit system.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.762-768
• /
• 2010

The Bimodal Tram being developed in Korea is a new transit system that provides both benefits of rail and bus systems in terms of accessibility and fixed time schedule. The Bimodal Tram is expected to take an important role of transit system in Korea under the national strategy of transportation system such as 'Low Carbon and Green Growth' for the next generation. This study does define the key indices considered for a decision of introducing the Bimodal Tram system and develop a finalized index, BSI(Bimodal Score for Introduction), showing the level of Bimodal Tram system introduced at a city level. The transport/transit system varies depending on cities with respect to demographic characteristics, travel patterns, financial capabilities, etc. This study will help any cities where transport agencies are trying to introduce the Bimodal Tram as a new transit system.