• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.65-75
• /
• 2001

Modern vehicles require a high degree of refinement including good driveability. Vehicle driveability, which becomes a key decisive factor f3r marketability, is affected by many parameters such as engine control and the dynamic characteristics in drive lines. Therefore engine and drive train characteristics should be considered to achieve a well balanced vehicle response simultaneously. This paper describes experimental procedures which have been developed to measure engine torque and investigate shuffle characteristics. To analyze the vehicle dynamic behavior, fractional torques and inertia mass moment of engine, and drive train were measured. Shuffle characteristics during tip-in condition were investigated in an experimental vehicle at 2nd and 3rd gear stages. It was found that the shuffle characteristics were caused by sudden changes of engine torque and have a different vibration frequency with gear stage variation. Inertia mass moment of engine including flywheel rotation showed a key factor for the shuffle characteristics.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.3
• /
• pp.114-119
• /
• 2001

An automatic train operation(ATO) system executes the operation of constant speed travelling and fixed point parking by using microprocessors instead of driver's manual operation. This paper describes the mathematical model for the train considering unknown disturbances which consist of start resistance, travelling resistance, slope resistance, curve resistance, and so on. The speed controller of ATO system is designed by considering the disturbances. The simulation is executed to verify the speed control and fixed point parking performance and to compare its performance with that of a PID-type ATO control system under disturbances. Simulation results show that the control performance of gain scheduled control scheme for ATO system is better than that of the conventional PID controller.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.6
• /
• pp.105-112
• /
• 2007

The era of express train in Korea has come since April in 2004. The KTX(Korea Train Express) which has introduced the technology of TGV of France is regraded as good as the ICE of Germany or Shinkansen of Japanese in its hardware aspects. However there are still many things to be improved in its software aspects such as the quality of services, since the new express railway system is in the early beginning stage. To improve the quality of services, we should first measure and analyze the current level of the service quality. Using SERVQUAL model, the service level of KTX is measured and analyzed in this paper. Issues on how to improve the service quality are discussed based on the measurement and analysis.

• International Journal of Railway
• /
• v.5 no.2
• /
• pp.65-70
• /
• 2012

This paper introduced a novel railway system, Automatic Train Protection and Block (ATPB) briefly, which is proposed to improve the efficiency of existing regional train lines with low cost in Japan. The biggest superiority of ATPB system is a great use of universal and mature technologies, such as GPS and regular mobile telephone networks, so that there is nearly no increment of trackside equipments in the reconstruction. Then in order to guarantee the system safety, a formal model of ATPB is established and analyzed by formal method VDM++. Firstly, the specification is specified by VDM++ formally without ambiguity. Secondly, its internal consistency is proved by discharging the proof obligations. And finally, its satisfiability is checked by systematic testing, which executes specification and checks the outputs against corresponding inputs.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.835-840
• /
• 2008

Next Generation High Speed Train having a distributed electrical motor system has just been developing to aim the experimental maximum speed at 400km/h since August, 2007. This project is in stage of concept design and so, it needs to take some review and analysis the characteristics of suspensions on the view of concept design. A vehicle modeling is made of modified Korean High Speed Train bogie model with Vampire program and analyzed the effect on the dynamic performances according to the variation of primary and secondary suspension characteristics. The results would be useful to manage the potential risks in the next stage of basic and precision design that will be done by the manufacturing company.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.307-314
• /
• 1998

In this paper, a numerical method for analyzing the interactions between train and track is presented. The effect of track irregularity on high speed running trains and track is examined by parametric studies. Two types of vertical track irregularity are considered. The first one is ideally assumed to a sine wave to investigate train and track behaviors with the change of its shape feasibly, The second one is artificially generated from PSD of track irregularity which was established from the measured data on real railways. In the track dynamic model, rail is considered to have a distributed mass and to be supported discretely at sleepers above ballast divided into three layers. Then, the contact between wheel and rail is modeled by a nonlinear Hertzian spring.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.421-423
• /
• 1999

The function of the automatic train operation(ATO) system is to regulate the train ride comfort during start, acceleration and deceleration and execute operation of constant speed travelling and fixed point parking. The mathematical model for the train is presented by considering unknown disturbances which consist of start resistance, travelling resistance, slope resistance, curve resistance and so on. The speed control of ATO system is designed by considering the disturbances. The simulation is executed to verify the speed control performance and compare its performance with that of a PID-type ATO control system under the disturbances. Simulation results show that the control performance of gain scheduled control for ATO system is better than that of the conventional PID controller.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.26-29
• /
• 2004

In order to speed up basic concept is to enhance high speed, curve limit speed, cross limit speed, acceleration/deceleration speed. It is important to optimal interface fundamental technology of vehicle, rail, electrical power, and signal system. Tilting train has advantage minimizing investment cost of infra railway system for increasing train limit speed in curve. the developed tilting train should be operated to commercial service speed 180Km/h of 200Km/h at KNR upgrade railroad. This paper proposed the basic model of system engineering for developing of tilting EMU (maximum operation speed : 180km/h) with speed-up of conventional railway system.

• Structural Engineering and Mechanics
• /
• v.12 no.3
• /
• pp.267-281
• /
• 2001

Transient and quasi-steady-state vertical vibrations of a multi-span beam steel bridge located on a single-track railway line are considered, induced by a superfast passenger train, moving at speed 120-360 km/h. Matrix dynamic equations of motion of a simplified model of the system are formulated partly in the implicit form. A recurrent-iterative algorithm for solving these equations is presented. Excessive vibrations of the system in the resonant zones are reduced effectively with passive dynamic absorbers, tuned to the first mode of a single bridge span. The dynamic analysis has been performed for a series of types of bridges with span lengths of 10 to 30 m, and with parameters closed to multi-span beam railway bridges erected in the second half of the $20^{th}$ century.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.503-508
• /
• 2002

According to passengers gain and headway's contraction, railway vehicle is required quick and correct running. The importance of ATC device was increased gradually, and also is acting important role in safe train running and efficient use in this reason. Now, railway vehicle that is manufactured or is remodeled are designed to most automatic driving system, and ATC device design direction than other device of railway vehicle influences to whole system in this reason. Also, according as system becomes complicated gradually, importance of fault tracing function fur ATC device is emphasized gradually, and in this reason research about efficient fault tracing method is to act important role heightening reliability of ATC device. In this document, that analyzing about result through examination of automatic train operation system of localization model ATC device(SG-100) and application example, and do so that investigate about efficient fault Bracing.