• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.243-247
• /
• 1992

This paper describes a neural network based control scheme with MRAC. The system consists of two neural network; one is for identifier and the other is for controller. Identification is firstly performed to learn the behavior of the nonlinear plant. Neural net controller is next trained by backpropagating the error at the output of plant through the identifier. Also the training method used in this paper repeatedly updates weights of neural network to track the reference model.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.915-921
• /
• 2005

Accurate and reliable tracking system is essential for the central train control system. There are two systems widely being used. one is the fixed block system which utilizes the track circuit for the detection of train position. the other is the moving block system which has the advantage over the former since it enables shorter radio signal for the train position detection. In this paper a new algorithm is proposed which uses signal's phase difference of arrival to detect the train position. Experimental verification of the algorithm is presented in the paper.

• Communications for Statistical Applications and Methods
• /
• v.12 no.2
• /
• pp.295-304
• /
• 2005

This paper concentrates on the prediction of typhoon tracks using the dynamic linear model (DLM) for the statistical correction of the numerical model guidance used in the JMA. The DLM with proposed forecast strategy is applied to reduce their systematic errors using the latest observation. All parameters of the DLM are updated dynamically and backward forecasting is performed to remove the effect of initial values.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.4
• /
• pp.274-282
• /
• 2009

Various location tracking sensors; such as GPS, INS, radar, and optical equipment; are used for tracking moving targets. In order to effectively track moving targets, it is necessary to develop an effective fusion method for these heterogeneous devices. There have been studies in which the estimated values of each sensors were regarded as different models and fused together, considering the different error characteristics of the sensors for the improvement of tracking performance using heterogeneous multi-sensor. However, the rate of errors for the estimated values of other sensors has increased, in that there has been a sharp increase in sensor errors and the attempts to change the estimated sensor values for the Sensor Probability could not be applied in real time. In this study, the Sensor Probability is obtained by comparing the RMSE (Root Mean Square Error) for the difference between the updated and measured values of the Kalman filter for each sensor. The process of substituting the new combined values for the Kalman filter input values for each sensor is excluded. There are improvements in both the real-time application of estimated sensor values, and the tracking performance for the areas in which the sensor performance has rapidly decreased. The proposed algorithm adds the error characteristic of each sensor as a conditional probability value, and ensures greater accuracy by performing the track fusion with the sensors with the most reliable performance. The trajectory of a UAV is generated in an experiment and a performance analysis is conducted with other fusion algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.1100-1112
• /
• 1998

In this paper, a novel method of minimizing the phase error is proposed. A DP-PLL system using this method is implemented and its performacnce is investigated, too. The DP-PLL system detects the phase error between reference clock and locally generated system clock. The phase difference is then reported as a PEV(Phase Error Variation), which is propoced from the delayted n-tap rising dege clock circuit with 5ns resolution in the phase detector. The algorithm is used to track the optimal DAC coefficients, which are adjusted from sample to sample in such a way as to minimize the PEV. The proposed method is found to have remarkable good potential for fast and accurate phase error tracking characteristic. The algorithm shows good performance to supress the low frequency jitter.-ending points, we design new basis functions based on the Legendre polynomial and then transform the error signals with them. When applied to synthetic images such as circles, ellipses and etc., the proposed method provides, in overall, outstanding results in respect to the transform coding gain compared with DCT and DST. And in the case when applied to natural images, the proposed method gives better image quality over DCT and comparable results with DST.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.1-10
• /
• 1999

Direct extraction of FET's small signal model parameters needs predetermined parasitic elements usually obtained under forward cold FET conditionl This paper derives analytic intrinsic model for cold FET's and shows that normal cold FET condition can replace forward cold FET condition for extracting parasitic elements. Then, we track the error of hot FET's small signal model bounded by the cold FET condition and examine the validness of cold parasitic resistances by checking the existence of the error minimum.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.1
• /
• pp.42-47
• /
• 2011

Automatic generation control (AGC) is an important function for load frequency control, which is being implemented in Energy Management System (EMS). A key feature of AGC is to back up governors to enhance the performance of frequency control. The governor regulates system frequency in several to ten seconds, while the droop control concept results in steady-state control error. AGC is a supplementary tool for compensation of the steady-state error caused by the droop setting of the governors. As the AGC target is delivered to each generator as an open loop control target, the generator output is not guaranteed to follow the AGC target. In this paper, we introduce generating unit controller (GUC) control block, which has the purpose of enabling the generator output to track the AGC target while maintaining the governor performance. We also address the tuning methods of GUC for better performance of AGC in the Korea Energy Management System (K-EMS).

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.855-860
• /
• 2007

This paper describes a human driver model developed based on finite preview optimal control method. The human driver steering model is constructed to minimize a performance index which is a quadratic form of lateral position error, yaw angle error and steering input. Simulation studies are conducted using a vehicle simulation software, Carsim. The Carsim vehicle model is validated using vehicle test data. In order to validate the human driving steering model, the human driver steering model is compared to the driving data on a virtual test track(VTT) and the actual vehicle test data. It is shown that human driver steering behaviors can be well represented by the human driver steering model presented in this paper

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.5
• /
• pp.507-512
• /
• 2007

This paper presents a tracking filter with ship's motion compensation for a ship-borne radar tracking system. The ship's maneuver is described by displacement and rotational motions in the ship-centered east-north frame. The first order Taylor series approximation of the measurement error covariance of the converted measurement is derived in the ship-centered east-north frame. The ship's maneuver is compensated by incorporating the measurement error covariance of the converted measurement and displacement of the position state in the tracking filter. The simulation results via 500 Monte-Carlo runs show that the proposed method follows the target successfully and provides consistent tracking performance during ship's maneuvers while the conventional tracking filter without ship motion compensation fails to track during such periods.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.56.3-56
• /
• 2002

For the weld quality improvement and the convenient operation of machines, laser vision system can be used to track weld seams on pressure vessels. There are many bad conditions to the weld grooves such as cutting error, gap variation of weld joint, and offset error of center line caused by misalignment. We developed a laser vision seam tracking system which consists of a laser vision sensor, a two axis positioning mechanism and a user interface program running on the Windows system. It was found that our system worked well for U, V and X shaped grooves. We used an industrial PC as the system controller to secure immunity to electrical noise and dust. We introduce here a simple and...