• Tunnel and Underground Space
• /
• v.8 no.4
• /
• pp.351-358
• /
• 1998

A statistical method for assessing the joint persistence based on the in-situ measurement of joint trace length has been derived. This method utilizes the probability density distribution of either the joint trace length or the diameter of hypothetically circular joint diameter depending on the relative size of joint surface to that of the potential keyblock. The stability of potential keyblock with different sizes and joint persistences has been also calculated to illustrate the applicability of the developed method to the design and the safe excavation of large scale underground openings.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1953-1962
• /
• 1999

While acquiring the image, the shaking of the image capturing equipment or the object seriously damages the image quality. This phenomenon, which degrades the clarity and the resolution of the image is called motion blur. In this paper, a newly defined function is introduced for finding the degree and the length of the motion blur. The domain of this function defined as Peak-trace domain. In The Peak-trace domain, the noise dominant region for calculating the noise variance and the signal dominant region for extracting the degree and the length of the motion blur are defined and analyzed. Using the information of the Peak-trace in the signal dominant region, we can find the direction of the motion regardless of the noise corruption. Weighted least mean square method helps extracting the Peak-trace more precisely. After getting the direction of the motion blur, we can find the length of the motion blur based on one dimensional Cepstrum. In the experiment, we could efficiently restore the degraded image using the information obtained by the proposed algorithm.

• Tunnel and Underground Space
• /
• v.21 no.5
• /
• pp.386-393
• /
• 2011

This study suggests an algorithm for estimating joint diameter distribution in rock mass from the joint trace length distribution around a circular tunnel. For estimating the joint diameter distribution, the concept of Joint Center Volume (JCV) suggested by Song. (2005) was applied and the calculation method of JCV for the cylindrical window survey was developed by using the complete survey method. The estimated joint diameter distribution was verified against the original joint diameter distribution by Monte-Carlo simulation. It was observed that the estimated joint diameter distribution was converged to the original joint diameter distribution with less than 20% of error.

• Tunnel and Underground Space
• /
• v.30 no.3
• /
• pp.226-241
• /
• 2020

The stability of underground mine cavity is closely related with pillar strength. The vulnerability of pillars can be judged and reinforced if the pillar strength is known. The pillar strength is affected by characteristics of discontinuities and shape of a pillar. The change of pillar strength due to a discontinuity passing through the center of a pillar, width-to-height ratio of a pillar and small joints existing within a pillar was analyzed using PFC 3D. The result showed that the pillar strength is influenced by dip angle of a discontinuity and it increases as width-to-height ratio of a pillar increases. The pillar strength decreases as the number of contained joints increases. The relationship between total trace length observable from the pillar surface and the pillar strength was regressed with exponential function. The correlation coefficient of the regression was high enough so that pillar strength can be predicted using total trace length if a joint set exists in a pillar. Lastly, the method to estimate the strength of a pillar that includes two joint sets was proposed if the joint dip angles are 60°, 30°. The method also need total trace lengths of two joint sets.

• Tunnel and Underground Space
• /
• v.15 no.2 s.55
• /
• pp.137-144
• /
• 2005

An estimation technique of the joint diameter distribution using the least square method is suggested. When utilizing the technique by Song and Lee, the diameter distribution would be obtained only from the trace length distribution defined in an infinite window after the trace length distribution is estimated from the contained trace length distribution. With the new technique, however, the diameter distribution can be directly obtained from the sample histogram of the contained trace lengths. Compared with the previous technique, it shows a more accurate result for small sizes of joint samples and provides the joint geometry parameter of volumetric frequency. Verification of this new technique was completed by using Monte Carlo simulations.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.2
• /
• pp.21-30
• /
• 2001

통계적 절리모델링에서 가장 불확실성이 큰 부분이 절리의 길이분포를 추정하는 것이다. 절리선 길이 분포의 추정에서 이제까지는 주로 조사선 조사(scanline survey)를 통한 절리선 반길이 분포를 이용하여 왔다. 이 연구에서는 포이송 디스크 절리모델에 대하여 보다 정밀도가 높은 절리선 길이 분포 추정방법을 찾기 위하여 조사창 조사를 이용하였다. 직사각형 및 원형 조사창에 대하여 양쪽 끝이 조사창 내부에 존재하는 절리선인 양끝내포선의 길이 분포와 한쪽 끝만이 존재하는 한끝내포선의 길이 분포를 이용, 절리선 분포를 추정하는 4개의 관계식을 각각 유도하고 컴퓨터 모의실험을 통하여 유도식의 타당성을 검증한 후 각 유도식을 이용한 절리선 분포의 추정오차를 비교하였다. 또한 절리선 분포로부터 절리직경분포를 계산하는 수치적 해를 유도하고 컴퓨터 모의시험을 통해 수치적 해에 대한 타당성을 검증하였다. 이 연구에서 제시한 조사창 조사를 이용한 절리 길이의 추정방법은 앞으로 절리모델링 분야에서 적용성이 높을 것으로 판단된다.

• Tunnel and Underground Space
• /
• v.26 no.3
• /
• pp.201-211
• /
• 2016

A method for estimating rock joint size distribution using contained traces length distribution from 3D cylindrical window survey was suggested. To reduce the numerical error, an improved technique was applied. The accuracy was verified by referring to Monte-Carlo simulation and it was found that the error can be decreased with suitable gamma values.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.358-360
• /
• 2003

모델검사는 시스템과 그 시스템이 만족해야할 속성을 입력받아서 시스템이 속성을 만족하는지를 자동으로 보여주는 기술이다. 시스템이 속성을 만족한다면 참을, 만족하지 않는다면 왜 만족하지 않는지에 대한 반례를 보여준다. 모델검사에서 반례는 시스템의 오류를 발견하는데 중요하게 사용된다. 또한 모델검사를 이용해서 게임시스템을 모델링하고 반례를 이용해서 게임에 대한 풀이를 알 수 있게 되었다. 하지만 이런 반례가 최적의 풀이인지는 알 수 없었다. 이 논문은 모델검사에서 나온 게임 풀이가 최단 풀이 경로인지를 살펴본다. 그리고 최단 풀이경로를 출력하도록 NuSMV를 수정하여 원래 NuSMV에서 생성된 게임 풀이와 길이를 비교해 본다.

• Tunnel and Underground Space
• /
• v.16 no.1 s.60
• /
• pp.26-37
• /
• 2006

This study addresses the applicability of box fractal dimension, $D_B$, as an index of statistical homogeneity of fractured rock mass. The box-count method's capability in quantifying the combined effect of fracture density and size distribution is examined systematically. Total of 129 two-dimensional fracture configurations were generated based on different combinations of fracture size distribution and fracture density. $D_B$was calculated for the generated fracture network systems using the box-counting method. It was found that was standard deviation of trace length and fracture orientation have no effect on calculated $D_B$. The estimated $D_B$ was found to increase with increasing total density and/or mean trace length. To explore the field applicability of this study, the statistical homogeneity of fractured rock mass was investigated at the rock slope and the underground facility using the box-counting method as well as conventional contingency table analysis. The results obtained in this study clearly show that the methodologies given in this paper have the capability of determining the statistical homogeneity of fractured rock mass.

• The Journal of Engineering Geology
• /
• v.17 no.2 s.52
• /
• pp.309-315
• /
• 2007

The purpose of this paper is to make a close inquiry into the relationship between width and length of crack as a method to maximize compensation effect by grouting discontinuity within weak bedrock, together with emphasis on application of the basic data to the reformation of weak bedrock in a construction site. The result reveals that the length of trace at each fracture averages $1.5{\sim}3.0mm$. Based on analysis of openness distribution pattern at each fracture, the estimated values are quite well in agreement with those of the experiment, with a negative trend in the distribution of aperture width.