• 한국해양공학회지
• /
• 제11권2호
• /
• pp.57-69
• /
• 1997

The objetive of this study is to compare the mechanical proprties of 6000 series Al-Mg-Si aluminum alloy (AC120) with 5000 series Al-Mg aluminum alloy (TG25), and to investigate the influence of corrosion solution for fatigue life. Comparing of TG25 and AC120 alloy sheets, TG25 alloy sheets showing higher plastic ratio and total elongation have better formability than AC120 alloy sheets. The hardness of nugget area was a little higher than that of base metal area. Also, grain coarsening was observed in HAZ(Heat Affected Zone). In a corrosion fatigue experiment, the fatigue life decreased as concentration increased, when a dipping time was constant. The life decreased as dippling time increased, when a concentration was constant.

• IEIE Transactions on Smart Processing and Computing
• /
• 제1권1호
• /
• pp.50-64
• /
• 2012

Quality of Service (QoS) and fairness considerations are undoubtedly essential parameters that need to be considered in the design of next generation scheduling algorithms. This work presents a novel game theoretic cross-layer design that offers optimal allocation of wireless resources to heterogeneous services in Orthogonal Frequency Division Multiple Access (OFDMA) networks. The method is based on the Axioms of the Symmetric Nash Bargaining Solution (S-NBS) concept used in cooperative game theory that provides Pareto optimality and symmetrically fair resource distribution. The proposed strategies are determined via convex optimization based on a new solution methodology and by the transformation of the subcarrier indexes by means of time-sharing. Simulation comparisons to relevant schemes in the literature show that the proposed design can be successfully employed to typify ideal resource allocation for next-generation broadband wireless systems by providing enhanced performance in terms of queuing delay, fairness provisions, QoS support, and power consumption, as well as a comparable total throughput.

• 품질경영학회지
• /
• 제12권2호
• /
• pp.2-5
• /
• 1984

고장시 응급수리(應急修理)가 가능한 부품(部品)의 정기교환정책(政期交換政策)을 예비품(豫備品)의 다량확보가 가능한 경우로 확장하였다. 최적대치기간(最適代置期間)들은 재고유지비(在庫維持費) 때문에 증가수열(增加數列)을 이루었고, 이로부터 최적(最適) l회 예비품(豫備品) 발주량(發注量) 및 최적(最適) 대치기간(代置期間)들을 구할 수 있었다. 각(各) 부품(部品)의 대치기간(代置期間)을 같게 두면 문제가 간단해 지면서도 최소비용(最小費用)에는 별 차(差)가 없었다.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.495-500
• /
• 2003

UV-induced graft polymerization of glycidyl methacrylate (GMA) to a polypropylene (PP) membrane was carried out in the vapor phase with benzophenone (BP) as a photoinitiator. Attenuated total reflection Fourier transform infrared spectroscopy, atomic force microscopy (AFM), and scanning electron microscopy (SEM) were utilized to characterize the copolymer. The degree of grafting increased with increasing reaction time, increased UV irradiation source intensity, and increased immersion concentration of the BP solution. The optimum synthetic condition for the PP-g-GMA membrane was obtained with a reaction time of 2 hrs, a UV irradiation source intensity of 450 W, and an immersion concentration of the BP solution of 0.5 mol/L. The pure water flux decreased upon increasing the degree of grafting and increasing the amount of diethylamino functional group introduced. The analysis of AFM and SEM images shows that the graft chains and diethylamino groups of PP-g-GMA grew on the PP membrane surface, resulting in a change in surface morphology.

• Industrial Engineering and Management Systems
• /
• 제10권2호
• /
• pp.123-127
• /
• 2011

Nowadays, green purchasing, stop global warming, love the mother earth, and others that related to environment become hot issues. Manufactures industries tend to more active and responsive to those issues by adopting green strategies or program like Environmentally Conscious Manufacturing (ECM). In this article, an electronic company had applied 12 ECM Program and tries to choose one of those programs using 6 criteria, such as total cost involved, quality, recyclable material, process waste reduction, packaging waste reduction, and regulation compliance. By using multi-criteria decision making model, i.e. Analytical Hierarchy Process (AHP), Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), and Modified TOPSIS methods, the ECM Program 9 (Open pit) is the best option.

• Industrial Engineering and Management Systems
• /
• 제12권1호
• /
• pp.30-35
• /
• 2013

Motivated by the emergency scheduling in a transportation network, this paper considers a transportation problem, in which, the truck times and transportation costs are assumed as uncertain variables. To meet the demand in the practical applications, two optimization objectives are considered, one is the total costs and another is the completion times. And then, a multi-objective optimization model is developed according to the situation in applications. Because there are commensurability and conflicting between the two objectives commonly, a solution does not necessarily exist that is best with respective to the two objectives. Therefore, the problem is reduced to a single objective model, which is an uncertain programming with a chance-constrain. After some analysis, its equivalent deterministic form is obtained, which is a nonlinear programming. Based on a stepwise optimization strategy, a solution method is developed to solve the problem. Finally, the computational results are provided to demonstrate the effectiveness of our model and algorithm.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2001년도 추계학술대회 논문집
• /
• pp.191-194
• /
• 2001

We consider a postal transportation planning in the transportation network of the form of hub and spoke. Given mail sorting centers and an exchange center, available vehicles and amount of mails to be transported between mail sorting centers, postal transportation planning is to make a transportation plan without violating various restrictions. The objective is to minimize the total transportation cost. To solve the problem, a tabu search algorithm is Proposed. The algorithm is composed of a route construction procedure and a route improvement procedure to improve a solution obtained by the route construction procedure using a tabu search. Computational results show that the proposed algorithm can solve practically sized problems within a reasonable time and the quality of the solution is acceptable.

• 경영과학
• /
• 제20권2호
• /
• pp.33-43
• /
• 2003

In this paper we applied dynamic programming to determining work schedule type. In dynamic programming formulation, each day during a planning horizon represents a stage for which a decision is made. The alternatives are given by work schedule types that combine regular time, overtime, additional shift, and so on. In this case, their associated return function is labor cost. The state is defined as the amount of work time allocated to stage 1, stage 2,…, and current stage. A case study for a real manufacturing company was performed to apply dynamic programming to scheduling daily work hours during a week. The case study showed that total cost of our solution derived from dynamic programming decreased by about 6％ as compared with the solution obtained from the previous method.

• Journal of Chest Surgery
• /
• 제17권4호
• /
• pp.587-592
• /
• 1984

Potassium cardioplegia for myocardial preservation is being used extensively in open heart surgery. This study was designed to investigate the change in serum and urine potassium before, during, after the administration of cold blood potassium cardioplegic solution containing 28-30 mEq/L [28.6\ulcorner.56 mEq/L] of potassium chloride in 6 dogs. Total potassium dose used in the study was 14.9\ulcorner.89 mEq/L [1.2 mEq/Kg]. Mean potassium level in serum was within normal limits. Urinary excretion of potassium decreased during bypass but increased after bypass and eventually exceeded the amount of potassium infused as cold blood potassium cardioplegic solution. While cold blood potassium cardioplegia is a safe and efficient method of myocardial protection, postoperative potassium level must be observed carefully in order to detect obligatory potassium excretion following open heart surgery.

• 한국미생물·생명공학회지
• /
• 제27권3호
• /
• pp.208-214
• /
• 1999

The condition for immobilization of the partially purified agarase from Bacillus cereus ASK202 and the properties of the immobilized enzyme have been investigated. Agarase was immobilized on various supports by entrapment method. The enzyme immobilized on Na-alginate bead showed the highest activity among those studied. The optimal reaction conditions of the immobilized agarase were obtained in 3%(w/v) Na-alginate for the matrix, bead diameter of 2.5mm, 1 unit of agarase solution and 1.0%(w/v) calcium chloride solution. The optimum pH and temperature of the immobilized agarase were pH and temperature of the immobilized agarase were pH 7.0 and 4$0^{\circ}C$, respectively. Km and Vmax values were 0.5mg/ml.min, respectively. The immobilized agarase conerted agar to agarobiose, and their total conversion ratio under the optimal condition was 89%.