• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.1024-1027
• /
• 2005

Rapid and simple method was developed for simultaneous determination of vitamins $D_3\;and\;K_1$ contents in infant formula. Contents of vitamins $D_3\;and\;K_1$, extracted by column-switching HPLC with reversed phase column using enzymatic hydrolysis and organic solvent, in CRM determined by developed method were within certified ranges of standard values.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.237.2-237.2
• /
• 2013

ReRAM cell, also known as conductive bridging RAM (CBRAM), is a resistive switching memory based on non-volatile formation and dissolution of conductive filament in a solid electrolyte [1,2]. Especially, Chalcogenide-based ReRAM have become a promising candidate due to the simple structure, high density and low power operation than other types of ReRAM but the uniformity of switching parameter is undesirable. It is because diffusion of ions from anode to cathode in solid electrolyte layer is random [3]. That is to say, the formation of conductive filament is not go through the same paths in each switching cycle which is one of the major obstacles for performance improvement of ReRAM devices. Therefore, to control of nonuniform conductive filament formation is a key point to achieve a high performance ReRAM. In this paper, we demonstrated the enhanced repeatable bipolar resistive switching memory characteristics by spreading the Ag nanocrystals (Ag NCs) on amorphous GeSe layer compared to the conventional Ag/GeSe/Pt structure without Ag NCs. The Ag NCs and Ag top electrode act as a metal supply source of our devices. Excellent resistive switching memory characteristics were obtained and improvement of voltage distribution was achieved from the Al/Ag NCs/GeSe/Pt structure. At the same time, a stable DC endurance (>100 cycles) and an excellent data retention (>104 sec) properties was found from the Al/Ag NCs/GeSe/ Pt structured ReRAMs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.1
• /
• pp.195-215
• /
• 2021

Multipath Transport Control Protocol (MPTCP) is a transport layer protocol that enables multiple TCP connections across various paths. Due to path heterogeneity, it incurs more energy in a multipath wireless network. Recent work presents a set of approaches described in the literature to support systems for energy consumption in terms of their performance, objectives and address issues based on their design goals. The existing solutions mainly focused on the primary system model but did not discourse the overall system performance. Therefore, this paper capitalized a novel stochastically multipath scheduling scheme for data and path capacity variations. The scheduling problem formulated over MPTCP as a stochastic optimization, whose objective is to maximize the average throughput, avoid network congestion, and makes the system more stable with greater energy efficiency. To design an online algorithm that solves the formulated problem over the time slots by considering its mindrift-plus penalty form. The proposed solution was examined under extensive simulations to evaluate the anticipated stochastic optimized MPTCP (so-MPTCP) outcome and compared it with the base MPTCP and the energy-efficient MPTCP (eMPTCP) protocols. Simulation results justify the proposed algorithm's credibility by achieving remarkable improvements, higher throughput, reduced energy costs, and lower-end to end delay.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.2
• /
• pp.137-148
• /
• 2002

Direct Torque Control(DTC) is considered to be an useful control scheme of high performance induction motor drives because the scheme provides a quick torque response without requiring the complex field-orientation block and inner current regulation loop. Among a few drawbacks of the conventional DTC scheme, large current harmonics due to flux drooping phenomenon in a low speed range may be the major difficulty In order to remove the difficulty, a fuzzy variable switching sector scheme and its real-time implementation algorithm are proposed in this paper. A DSP based control board is designed for the Induction motor drives with the DTC scheme including the fuzzy switching sector algorithm. Simulation and experimental results show the effectiveness of the proposed scheme.

• ETRI Journal
• /
• v.24 no.4
• /
• pp.311-322
• /
• 2002

Presently, optical burst switching (OBS) technology is under study as a promising solution for the backbone of the optical Internet in the near future because OBS eliminates the optical buffer problem at the switching node with the help of no optical/electro/optical conversion and guarantees class of service without any buffering. To implement the OBS network, there are a lot of challenging issues to be solved. The edge router, burst offset time management, and burst assembly mechanism are critical issues. In addition, the core router needs data burst and control header packet scheduling, a protection and restoration mechanism, and a contention resolution scheme. In this paper, we focus on the burst assembly mechanism. We present a novel data burst generation algorithm that uses hysteresis characteristics in the queueing model for the ingress edge node in optical burst switching networks. Simulation with Poisson and self-similar traffic models shows that this algorithm adaptively changes the data burst size according to the offered load and offers high average data burst utilization with a lower timer operation. It also reduces the possibility of a continuous blocking problem in the bandwidth reservation request, limits the maximum queueing delay, and minimizes the required burst size by lifting up data burst utilization for bursty input IP traffic.

• The Journal of Information Systems
• /
• v.21 no.2
• /
• pp.45-71
• /
• 2012

The purpose of the study is to propose the plans promoting IS acceptances under the circumstances where the IS usage is semi-mandatory. Since the IS usage is critical to secure the organization's competitiveness, many researchers have endeavored to investigate the factors in promoting IS acceptance. While TAM(Technology Acceptance Model) has been generally applied under the voluntary circumstance, under the mandatory circumstance did many researchers come to realized the limit of applying the TAM on IS acceptance. This resulted in various research trials to identify the IS acceptance under the mandatory circumstance. However, no research to promoting IS acceptance under the recommend circumstance where the corresponding users are recommend to the IS rather than alternative systems exits. The study applied the concept of switching costs to the research model, identified users' acceptance variations, and finally proposed the promotion plans for IS acceptance. The findings illustrate that IS dependence levels tend to be increased when both user satisfactions from a psychological perspective and monetary benefits from an economic perspective make the switching costs higher. The study stresses that organizations should provide information systems which reduce users' time, costs, and endeavors in performing their tasks, rather than require to use them by compulsion.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.6
• /
• pp.396-405
• /
• 2019

Single-phase full-bridge inverters have shoot-through problems. Dead time is an essential way of solving these issues, but it distorts the output voltage and current. Dual-buck inverters are designed to eliminate the abovementioned problems. However, these inverters result in switching power loss and electromagnetic interference due to the diode reverse-recovery problem. Previous studies have suggested reducing the switching power loss from diode reverse-recovery, but their proposed methods have complex circuit configurations and high system costs. To alleviate the switching power loss from diode reverse-recovery, the current work proposes a dual-buck inverter with a coupled inductor. In the structure of the proposed inverter, the current flowing into the original diode is divided into a new diode. Therefore, the switching power loss is reduced, and the efficiency of the proposed inverter is improved. Simulation waveforms and experimental results for a 1.0 kW prototype inverter are discussed to verify the performance of the proposed inverter.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.41-45
• /
• 2017

This paper presents a method of constructing the efficiency multiple output switching function of the combinational logic systems. The proposed method reduce the optimized input variable pair and output variable pair after we obtained the final multiple output switching function which was time based multiplexing and obtained the common multiple end node extension logic decision diagram. Also the proposed method have an advantage of the cost, input-output node number, circuit simplification, increment of the arithmetic speed, and more regularity and extensibility compare with previous method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.10
• /
• pp.907-911
• /
• 2006

In this paper, we propose a new structure that improves the on-state voltage drop and switching speed in Insulated Gate Bipolar Transistors(IGBTs), which can be widely used in high voltage semiconductors. The proposed structure is unique in that the collector area is divided by $SiO_2$, whereas the conventional IGBT has a planar P+ collector structure. The process and device simulation results show remarkably improved on-state and switching characteristics. Also, the current and electric field distribution indicate that the segmented collector structure has increased electric field near the $SiO_2$ corner, which leads to an increase of electron current. This results in a decrease of on-state resistance and voltage drop to $30%{\sim}40%$. Also, since the area of the P+ region is decreased compared to existing structures, the hole injection decreases and leads to an increase of switching speed to 30 %. In spite of some complexity in process procedures, this structure can be manufactured with remarkably improved characteristics.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.1
• /
• pp.68-78
• /
• 1997

A numerical study on the transient vapor flow and heat transfer is performed to investigate the ideal switching operation of heat source in a high temperature heat pipe. The cylindrical 2-dimensional compressible laminar vapor flow is assumed for the vapor space and the conjugate heat transfer for the heat pipe wall, wick and vapor space is calculated. The different boundary conditions such as constant heat flux, convective or radiative boundary at the outer wall are used respectively to compare the influence of boundary conditions on the transient operation. The transient temperature profile and the internal flow of the entire pipe for the switching operation are described as a result. The results show that the transient time is not significantly affected by the boundary conditions at the outer wall in present study. During the transition, two independent flows are observed temporarily on the right side and left side of the heat pipe. It is also found that the trend of temperature variation in the vapor region is different from the variation in the wick and wall region.