• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1016-1018
• /
• 1995

In this paper, we studied the electrical and the microwave properties of the amorphous $As_{10}Ge_{15}Te_{75}$ thin film. The electrical properties of a-$As_{10}Ge_{15}Te_{75}$ thin film were examined d.c. and a.c. bias with annealing condition. As the result of the electrical properties, we observed the physical characteristics of a-$As_{10}Ge_{15}Te_{75}$ thin film such as the density of defect states, characteristic relaxation time, localized density of states, and localized wave function by using CBH and QMT model. We also examined the microwave conduction properties before and after d.e. switching.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.3
• /
• pp.122-128
• /
• 2012

An interleaved boost converter has many advantages such as current ripple reduction, switching effective double, etc. Due to these advantages, the interleaved boost converter applies to the power factor correction circuit. However, there are almost no analysis results because the input voltage and current are time-varying system in the power factor correction application. Therefore, in this paper, the current ripples of the power factor correction circuit using single-phase boost dc-dc converter and 2-phase interleaved boost dc-dc converter are compared and analyzed in detail. In order to verify the validity, computer simulation and experimental are performed.

• Korean Management Science Review
• /
• v.28 no.3
• /
• pp.15-29
• /
• 2011

In this paper, we consider a system working at both primary service and secondary service. A server can switch between the primary service and the secondary service or it can be assigned to secondary service as a dedicated server. A service policy is characterized by the number of servers dedicated to the secondary service and a rule for switching the remaining servers between two services. The primary service system is modelled as a Markovian queueing system and the throughput is a function of the number of servers, buffer capacity, and service policy. And the secondary service system has a service level requirement strategically determined to perform the service assigned. There is a revenue obtained from throughput and costs due to servers and buffers. We study the problem of simultaneously determining the optimal total number of servers, buffers, and service policy to maximize profit of the system subject to both an expected customer waiting time constraint of the primary service and a service level constraint of the secondary service and develop an algorithm which can be successfully applied with the small number of computations.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.323-330
• /
• 2013

The number of domestic smartphone users exceeded 30 million people, and the time in the future everyone will use a smartphone that will come with ago. Past purchase decisions, related research and product from the competition between the past case and the relevant literature for the smartphone market smartphone type to derive a purchase decision factors in the decision to purchase any difference between the factors. Literature and practices through performance, switching costs, product loyalty, design, brand, after-sales service, the price more than 7 variables were analyzed. One hundred people surveyed, respectively, did not obtain the response of a variety of ages and occupations, age of the sample used in the analysis of this study, and is concentrated as a student at the university of smartphones used to facilitate users analysis was done. We expect smartphone companies and related companies to be able to give guidelines for effective technology management.

• ETRI Journal
• /
• v.25 no.1
• /
• pp.34-40
• /
• 2003

This paper considers a TMN-based management system for the management of public ATM switching networks using a four-level hierarchical structure consisting of one network management system, several element management systems, and several agent-ATM switch pairs. Using Jackson's queuing model, we analyze the effects of one TMN command on the performance of the component ATM switch in processing local calls. The TMN command considered is the permanent virtual call connection. We analyze four performance measures of ATM switches- utilization, mean queue length and mean waiting time for the processor directly interfacing with the subscriber lines and trunks, and the call setup delay of the ATM switch- and compare the results with those from Jackson's queuing model.

• ETRI Journal
• /
• v.21 no.2
• /
• pp.22-30
• /
• 1999

In this paper, we derive an efficient parallel algorithm to solve the single function coarsest partition problem. This algorithm runs in O(\log2n) time using O(nlogn) operations on the EREW PRAM with O(n) memory cells used. Compared with the previous PRAM algorithms that consume O(n1+${\varepsilon}$) memory cells for some positive constant ${\varepsilon}\>0$, our algorithm consumes less memory cells without increasing the total number of operations.

• ETRI Journal
• /
• v.22 no.4
• /
• pp.40-50
• /
• 2000

We apply a "sliding-window" Maximum Likelihood(ML) estimator to estimate traffic parameters On-Off source and develop a method for estimating stochastic predicted individual cell arrival rates. Based on these results, we propose a simple Connection Admission Control(CAC)scheme for delay sensitive services in broadband onboard packet switching satellite systems. The algorithms are motivated by the limited onboard satellite buffer, the large propagation delay, and low computational capabilities inherent in satellite communication systems. We develop an algorithm using the predicted individual cell loss ratio instead of using steady state cell loss ratios. We demonstrate the CAC benefits of this approach over using steady state cell loss ratios as well as predicted total cell loss ratios. We also derive the predictive saturation probability and the predictive cell loss ratio and use them to control the total number of connections. Predictive congestion control mechanisms allow a satellite network to operate in the optimum region of low delay and high throughput. This is different from the traditional reactive congestion control mechanism that allows the network to recover from the congested state. Numerical and simulation results obtained suggest that the proposed predictive scheme is a promising approach for real time CAC.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.6
• /
• pp.707-711
• /
• 2007

An observer-based fault tolerant control (FTC) method is proposed for constrained switched systems (CSS) with input constraints. A family of Lyapunov-based bounded controllers are designed to ensure that, whenever actuator faults occur at the dwell time period of each continuous mode, the mode is always within its corresponding stability region. A set of switching laws are designed to guarantee the asymptotic stability of the overall CSS. The fixed stability regions on which the FTC method is based are also relaxed by the proposed variable stability regions. An example of CPU processing illustrates the effectiveness of proposed method.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.883-884
• /
• 2004

High-speed IC for time-division multiplexing (TDM) optical transmission systems have been designed and fabricated by using InP heterojunction-bipolar-transistor (HBT) technology. The driver IC was developed for driving external modulators, featuring differential outputs and the operation speed up to 10 Gbps with an output voltage swing of 1.3 Vpp at each output which was the limit of the measurement. Because -3 dB frequency was 20GHz, this circuit will be operated up to 20Gbps. 1.3Vpp differential output was achieved by switching 50 mA into a 50 $\Omega$ load. The power dissipation of the driver IC was 1W using a single supply voltage of -3.5Y. Input md output return loss of the IC were better than 10 dB and 15 dB, respectively, from DC to 20GHz. The chip size of fabricated IC was $1.7{\Box}1.2 mm^{2}$.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.70-73
• /
• 2002

High frequency digital LSI circuits are usually composed of many sub-circuits coupled with interconnects. They sometimes causes serious problems of the fault switching by time-delays, crosstalks, reflections of signals and so on. Therefore, it is very important to develop a user-friendly simulator for solving these problems. Although a moment matching method is widely used as the reduction technique of interconnects, it may happen to arise erroneous results for evaluating the poles far from the origin. In this paper, we show an asymptotic method in the complex frequency-domain, where we calculate the exact poles and residues giving large effect to the transient responses. Then, the interconnects are replaced by the asymptotic equivalent circuits using the poles and residues. Thus, we can develop a users-friendly simulator using the equivalent circuits.