• 한국운동역학회지
• /
• 제15권3호
• /
• pp.9-19
• /
• 2005

The purpose of this study was to analyze the effects of three different types of preparatory movement(squat, countermovement and hopping) in sideward responsive propulsion movement. 7 healthy subjects performed left and right side movement task by external output signal. 3D kinematics were analyzed The results were followed First, performance time in the countermovement and hopping conditions was shorter(10-20%) than that in the squat condition. The hopping condition that is more related to pre-stretch showed excellent performance. Second, time difference between after turned on the external signal and until take off was the primary factor in performance results among movement conditions. The preparatory phase before the propulsive phase in the squat condition produced more time than that in other conditions. The hopping condition showed the most short time in both the preparatory and the propulsive phase, therefore it was advantage for performance result Third, significant difference was not found in take-off velocity among movement conditions although there was difference of the time required in the propulsive phase. The maximum acceleration in the propulsive phase was larger in order of the hopping. countermovement, and squat condition. The countermovement and hopping conditions showed high take-off velocity although the propulsive phase in those conditions was shorter than that in squat condition. The pre-stretch by preparatory countermovement was considered as the positive factor of producing power in concentric contraction. Fourth, the hopping condition produced large angular velocity of joints. In hopping condition, large amount of moment for rotation movement was revealed in relatively short time and it was considered to cause powerful joint movements. In conclusion, the hopping movement using countermovement is advantage of responsive propulsion movement. It is resulted from short duration until take off and large amount of joint moment and joint power in concentric contraction by pre-stretch.

• Journal of Communications and Networks
• /
• 제9권3호
• /
• pp.247-253
• /
• 2007

In this paper, downlink capacity of time duplex division (TDD) based cellular wireless networks utilizing fixed hopping stations is investigated. In the network, a number of fixed subscriber stations act as hopping transmission stations between base stations and far away subscribers, forming a cellular and ad hoc mobile network model. At the radio layer, TDD code division multiple access (CDMA) is selected as the radio interface due to high efficiency of frequency usage. In order to improve the system performance in terms of downlink capacity, we propose different time slot allocation schemes with the usage of fixed hopping stations, which can be selected by either random or distanced dependent schemes. Performance results obtained by computer simulation demonstrate the effectiveness of the proposed network to improve downlink system capacity.

• 한국운동역학회지
• /
• 제17권2호
• /
• pp.187-196
• /
• 2007

The purpose of this study was to find the most effective movement pattern from three different types of preparatory movement(squat, countermovement and hopping) in sideward responsive propulsion task, which had the time constraint to complete the performance. 7 healthy subjects participated in left and right side movement task by an external signal, which required the subject to perform the task as fast as possible. Mechanical output and joint kinetics focusing on the lower extremities were analyzed. The results were as follows. In spite of the shortest duration in propulsive phase, the hopping condition showed no difference with other conditions in the work output done and take-off velocity. It resulted from the greatest power output generated during the propulsive phase. A significant difference was found for joint moment and joint power according to the movement conditions. The joint moment and joint power for the countermovement and hopping conditions were larger than those in the squat condition. This was speculated to be due to the extra power that could be generated by the pre-stretch of muscle in preparation for the propulsion. The hopping condition which had substantially more pre-stretch load in the preparatory eccentric phase produced considerably more power than countermovement condition in the propulsive concentric phase. Furthermore during the hopping a large amount of joint moment and joint power could be produced in a shorter time. Therefore it was deemed that the hopping movement is an effective type of preparatory movement which takes much more advantage of the pre-stretch than any other movement.

• 한국항해항만학회지
• /
• 제31권2호
• /
• pp.159-163
• /
• 2007

In this paper, we mainly analyze the performance of two ultra wideband communication systems, the classical Time Hopping Binary Pulse Position Modulation (TH-BPPM) UWB system and the Time Hopping Bipolar Pulse Amplitude Modulation (TH-BPAM) UWB system. The performance of TH-BPPM and TH-BPAM is analyzed in detail under an ideal AWGN channel and a correlation receiver. We use the power spectral density function to get the expression of BER of these two UWB systems. It yields simple and exact formulas relating the performance to the system parameters. The analysis shows that TH-BPPM suffers performance degradation with respect to TH-BPAM. Furthermore, we give the computer simulation of both data and image transmission and our simulation results also prove our theoretical analysis.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.785-787
• /
• 2005

In the Bluetooth specification version 1.0, one specific frequency in one piconet was created depending upon the device clock and the Bluetooth native address at one specific time slot in the frequency hopping method. The basic hopping pattern was arranging the 79 ISM frequency band in pseudo-random fashion. Possible problem is the chance of collision of ownership of one specific frequency by more than 2 wireless devices when they are within the communication-active range. In this paper, we propose the adaptive frequency hopping method in order to resolve the possible problem so that more than 2 wireless devices communicates with their own client devices without being interfered. The proposed method was implemented with HDL later to be synthesized with an automatic EDA synthesizer and verified as well. The implemented adaptive frequency hopping circuit operated normally at 24MHz which will be the target clock frequency of the target Bluetooth device.

• ETRI Journal
• /
• 제38권3호
• /
• pp.455-462
• /
• 2016

Frequency hopping (FH) is a common characteristic of a wide variety of communication systems. On the other hand, software-defined radio (SDR) is an increasingly utilized technology for implementing modern communication systems. The main challenge when trying to realize an SDR FH system is the frequency tuning time, that is, the higher the hopping rate, the lower the required frequency tuning time. In this paper, significant universal hardware driver tuning options (within GNU Radio software) are investigated to discover the tuning option that gives the minimum frequency tuning time. This paper proposes an improved SDR frequency tuning algorithm for the generation of a target signal (with a given target frequency). The proposed algorithm aims to improve the frequency tuning time without any frequency deviation, thus allowing the realization of modern communication systems with higher FH rates. Moreover, it presents the design and implementation of an original GNU Radio Companion block that utilizes the proposed algorithm. The target SDR platform is that of the Universal Software Radio Peripheral USRP-N210 paired with the RFX2400 daughter board. Our results show that the proposed algorithm achieves higher hopping rates of up to 5,000 hops/second.

• 한국통신학회논문지
• /
• 제16권12호
• /
• pp.1357-1365
• /
• 1991

본 논문은 비주기 주파수 도약 확산 시스템(FH/SSMA)에 있어서 주파수 도약 패턴의 요소간, 치환을 이용한 새로운 주파수 도약 패턴 발생 방법을 제안하고, 종래 방법과 비교 검토한다. 제 1방법은 Latin Square에 의한 발생법을 이용하였다. 제2방법은 유한체의 요소를 이용한 치환방법을 설계하였다. 제 3방법에서는 유한체의 기준 집합 요서의 치환 base를 이용하여 발생법을 설계하였다. 평가를 위하여 주기/비주기성의 시간-주파수 변환에 의한 도약 패턴간의 힛트에 대해서 검토하였다. 검토 결과, 종래의 RS계열을 이용한 패펀보다 비주기성의 시간-주파수에 의한 힛트면에서 제2발생 방법이 좋은 결과를 얻었다.

• 한국통신학회논문지
• /
• 제18권11호
• /
• pp.1735-1741
• /
• 1993

주파수 도약 다원접속 통신시스템에 사용될 수 있는 우수한 해밍자기상관성 및 타 상관성 그리고 긴주기를 갖는 새로운 주파수 도약 패턴순이 소개되었다. 주파수 도략 패턴순의 주기는 qk-1, 알파벧 크기는 q, 주파수 도약 패턴군의 크기는 q인데, 여기서 k는 임의의 양의정수 그리고 q는 소수의 정수승이다. 자시상관함수 및 타 상관함수의 최대값은 qk-1(trivial 경우 제외)인데 이것은 최적의 해밍 상관함수에 해당된다. 그리고 주파수 도약 패턴에 있어서 q*q 스퀘어당 평균 충돌의 수는 1보다 작다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.205-208
• /
• 2000

In this paper, we design Tracking Filter that is principal component of Frequency Hopping System. This filter can acquire hopping pattern in short time and track it at high speed. This is high Q, narrowband, RF filter whose center frequency is controlled digitally between 30MHz ∼ 88MHz.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2000년도 하계종합학술대회논문집
• /
• pp.45-48
• /
• 2000

In this paper algorithms of frequency hopping sequences generation such as Lempel-Greenberger, optimum Lempel-Greenberger and Kumar sequences for spread spectrum communications are described. Using the scalogram based on wavelet transform, time-frequency characteristics of frequency hopped signals corresponding to the considered hopping sequences are analyzed.