• Horticultural Science & Technology
• /
• v.33 no.2
• /
• pp.186-195
• /
• 2015

This research was conducted to investigate effect the plant growth regulators (PGRs) on the characteristics of fruit and flesh softening, using GA3 and thidiazuron (TDZ) treatments in 'Heukboseok' grapes. The total yield obtained under PGR treatment was 88.3% lower than the target production when a single treatment with $GA_3$ of low concentrations was used, but the expected yield was recovered by combined treatment with TDZ and $GA_3$. When harvested on the basis of color, the harvest rate up to 100 days after full bloom (DAFB) was low with the $GA_3$ single treatment, but was increased by the addition of TDZ, with the second TDZ mixed treatment being particularly effective. The soluble solids content in the PGR-treated samples demonstrated no significant changes after 90 DAFB, while the acidity content decreased rapidly starting from 90 DAFB. Measured on the basis of sugar and acidity content, maturity was reached much earlier in treated fruit than in the non-treated fruit. Firmness was maintained at a higher level until the final harvest time after PGR treatment compared to untreated grapes according to epidermis thickness and flesh density increase to activity cell division and expansion by $GA_3$ and TDZ. In particular, the fruit quality was improved based on the delay of softening in primary and secondary treatments of $25mg{\cdot}L^{-1}\;GA_3+2.5mg{\cdot}L^{-1}$ TDZ. The production of seedless fruit was difficult, even with the inclusion of TDZ, reaching the highest seedless rate of only 65.5%. Fruit cracking was rare, occurring at a rate of about 0.0~0.9% in all treatments. Accordingly, 'Heukboseok' grapes should be harvested within 100 days after full bloom (DBFB) before a rapid decrease of firmness, conferred by primary and secondary treatments with $25mg{\cdot}L^{-1}\;GA_3+2.5mg{\cdot}L^{-1}$ TDZ.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.419-427
• /
• 2021

In South Korea, direct seeding of rapeseed (Brassica napus L.) is difficult during spring cultivation in early March because of the low yield production associated with late flowering and poor seed quality. To compare the period of direct sowing, the present study investigated the growth characteristics of rapeseed according to planting dates. Specifically, 35 day-old seedlings were transplanted or directly sown on four different dates (late February, early March, late March, and early April) in 2020 and 2021. As the planting date was delayed, the days to flowering of rapeseed decreased. Similarly, the plant height, seed set percentage, and seed yield of rapeseed were reduced upon delay in planting. The seed yield of rapeseed through direct seeding in late February was the highest, 2.76 ton·ha^-1. On all seeding dates, except for late February, the transplanted rapeseed produced a higher yields than the directly seeded rapeseed. The crude oil and oleic acid content, which is related to the quality of rapeseed, decreased with the delay in planting dates, and this decrease was greater, with the direct seeding of rapeseed depending on the sowing time. In the correlation analysis, the planting date was significantly and negatively correlated with the yield, crude oil content, and oleic acid content of the transplanted rapeseed, while the sowing date was negatively correlated with the plant height, silique size, yield, and seed quality of the directly seeded rapeseed. Finally, the effect of planting date on rapeseed growth was stronger in direct seeding than in transplanting. Therefore, during spring cultivation after late February to early March, transplanting, rather than direct seeding, in more advantageous in terms of seed quality and yield.

• Women's Health Nursing
• /
• v.6 no.2
• /
• pp.234-257
• /
• 2000

At present in the medical care, the study and effort for producing health service to consider efficiency, effectiveness, and quality are urgently called for because of the difficulty in the keen competition according to the inter- nationalization and opening, the operation in the medical institution service testing system, the change in the medical policy of KDRGs, and the lack of the health care cost increasing rate. As an alternative, the case management for the new management system is introduced in the U.S., and the Critical Pathway that is the method designing the contents of activity and its result has been developed and applied in order to anticipate and manage the patient-outcome for the realization of the cost-effective case-management. Thus, this study intended to analyze the effectiveness to obtain by developing the Critical Pathway presented as the method to improve the quality-betterment and cost effectiveness through the continuous and consistent patient management for the hysterectomy patient and applying it to the real practice. As a study method, this author formed a conceptual framework through considering five Critical Pathway used in the current U.S. and three Critical Pathway presented in the literature to develop the Critical Pathway for the hysterectomy patient, and made out the preliminary Critical Pathway through reviewing the old chart. This author made the verified the validity of the expert group about the developed Critical Pathway, and to confirm the possibility of practice application, completed and settled the final Critical Pathway after using the Critical Pathway to the hysterectomy patient from March 1st to 15th, 1997. Finally, to analyze the application-effect of the developed Critical Pathway, this author offered health care service applying the Critical Pathway to the hysterectomy patient from April 15th to August 31th, 1997. The guide for the Critical Pathway was carried out in advance by outpatient setting nurse for outpatient setting visit before the operation, and after hospitalization the primary nurse monitored the execution degree on the every duty. After discharge this author surveyed the complication through phone visiting, and one month after discharge surveyed the patient's reaction about the offered service when outpatient setting visit and analyzed the result. The source for health care cost was obtained by the statistics about the hospital charge which was offered by the General Business Department. The results were as follows. 1. It was decided that the vertical line of the Critical Pathway was made up of eight items such as monitoring/assessment, treatment, line/drains, activity, medication, lab test, diet, patient teaching, and the horizontal line of the Critical Pathway was made up of from hospitalization to discharge. 2. After the analysis of service contents through reviewing the old chart, it was decided that the horizontal line of the preliminary Critical Pathway was made up of from hopitalization to fourth postoperative day, and the vertical line of it was divided into eight items which were the contents to occur with the time frame of the horizontal line. 3. After the verifying the validity of the expert group about the preliminary Critical Pathway, the horizontal line was amended from hopitalization to third postoperative day, and taking their consensus, some contents of the horizontal line was amended and deleted. 4. From March 1st to 15th, 1997, to confirm the clinical suitability, this author offered eight hysterectomy patients the medical service through the Critical Pathway. The result was that three of them could be discharged at the expected discharge day, and the others later than that day. Supplementing the preliminary Critical Pathway through analyzing the cause of that delay- case, this author developed the final Critical Pathway. 5. There were no significant differences between the experimental and the control group in the incidence of complication(P > 0.05). 6. The 92.4% of experimental group was satisfied with the Critical Pathway service. 7. The length of hospital stay of the experimental group offered with the Critical Pathway service was 4.6 days and there was a significant difference that it was 1.3 days shorter than that of the control group(t=-29.514, P=0.000). 8. There wsa a significant difference that the mean medical charge per one patient of the experimental group offered the Critical Pathway service was cheaper \124,150 than that of the control group(t=-9.826, P=0.000). 9. The result that the author assumed and analyzed hospital income with the rate of turning bed was assumed that the increase of hospital income was \63,245,072 for that study, and the income increase was expected with \68,704,864 for a year. The result that this author applied the Critical Pathway to the hysterectomy patient have no differences in the incidence of complication, high satisfaction with that service, and the length of hospital stay decreased in the experimental group, and the mean hospital charge per one patient decreased, but hospital income increased. Suggestions for further study and nursing practice are as follows. 1. The study to apply the Critical Pathway for a year, verify the validity, and measure the effect repeatedly is needed. 2. To apply and manage the Critical Pathway effectively, the study to computerize it is needed. 3. The study to develop hospital-based Critical Pathway about other diseases or procedure, and measure the effect is needed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.14 no.2
• /
• pp.2634-2648
• /
• 1972

The aim of this Study is to bring Light on the effect of irrigation water temperature to the growth and harvest of Paddy rice in Various water Sources. 1. This research was completed in the writer's home nursery garden Located in Chungyoung-Ri, Hoeng sung-Myun, Hoengusung-Konn, Kangwan-Do. 2. The variety of Paddy rice was the IR667. 3. Practice was done by the treatment I .e river water, reservoir, tube well cold and tuke well warm with 3 riplications each. 4. The Paddy was transplanted in a pot 0.9 meter height and 1 meter Square without hottom filled with paddy soil to a planting depth 0.5 meter. The pot was laid underground and Covered with a film of polyethylene to keep of the rain. 5. The method of Cultivation was that used by the Filed Crops Experiment Station of the Office of Rural Development. 6. Atmospheric temperature was recorded every day of the growing period. The precipitation and Sun light was quoted by the KF-46 of Hoengsung. 7. The Soils in the test plots was relatively fortile, being Similar to ordinary paddy soils. 8. The charactor of irrigation water of surface and underground was both normal. 9. During the period of growth the average temperature of the underground water as $14.2^{\circ}C$ and that of the Surface was $24.1^{\circ}$. 10. The most useful water for the rice growing was that of river and reservoir while underground water was found to be generally injurious to the paddy growth because of low temperature. 11. In the case of underground water, there proved to be such harmful effects as reduction of culm length, rate of mature grain, panicle Length and grain weight and delay of tillering time, and heading time. Reading Therefore the writer conduded that the harvest of rice irrigated with underground water Showed a reduction of 15.8% compered with the rice irrigated by surface water.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.99-107
• /
• 1984

Naked barley flour(Baekdong cultivar) was examined with respect to its pasting properties by means of Brabender amylograph after adding barley lipids, fatty acids, vegetable oils and emulsifiers at 1% level. Amylogram of barley flour showed a similar gelatinization temperature but higher paste viscosities at all reference points as compared with wheat flour. Barley flour showed lower amylograph curves by defatting with n-hexane, namely reductions in initial gelatinization point, maximum viscosity and setback value. But re-addition of n-hexane extract to the defatted flour essentially reproduced the curve obtained in the undefatted flour. Addition of polar and nonpolar lipids exhibited different effects on the pasting properties of barley flour. Polar lipids generally increased maximum viscosity a little while non-polar lipids increased the maximum viscosity substantially. Addition of increasing amounts of nonpolar lipids was found to progressively increase the maximum viscosity. Addition of fatty acids increaed th maximum viscosity and delayed the peak time. The maximum viscosity of defatted barley flour impregnated with unsaturated fatty acids was higher than that of defatted barley flour impregnated with saturated fatty acids Increasing amounts of linoleic acid were fount to progressively increase the maximum viscosity and to delay the peak time of defatted barley flour. Addition of six vegetable oils lowered the gelatinization temperature and rasied the maximum viscosity and temperature at maximum viscosity. Addition of increasing amount of peanut oil was found to decrease the maximum viscosity. The effect of emulsifiers was greater in undefatted flour than in defatted flour. The maximum viscosity of defatted flour was slightly affected by Methocel 50, Methocel 1500 and Emulthin, and substantially increased by Methocel 4000, sodium polyacrylate and calcium stearyl lactylate.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.33-37
• /
• 2010

Purpose: In the early stage of using PET/CT, it was used to damper revision but recently shows that CT with MDCT is commonly used and works well for an anatomical diagnosis. This hospital makes the accuracy and convenience more higher in the diagnosis and evaluate of coronary heart disease through concurrently running myocardial perfusion SPECT examination, myocardial PET examination with FDG, and CT coronary artery CT angiography(coronary CTA) used PET/CT with 64-slice. This report shows protocol and image based on results from about 400 coronary heart disease examinations since having 64 channels PET/CT in July 2007. Materials and Methods: An Equipment for this examination is 64-slice CT and Discovery VCT (DVCT) that is consisted of PET with BGO ($Bi_4Ge_3O_{12}$) scintillation crystal by GE health care. First myocardial perfusion SPECT with pharmacologic stress test to reduce waiting time of a patient and get a quick diagnosis and evaluation, and right after it, myocardial FDG PET examination and coronary CTA run without a break. One-stop evaluation protocol of ischemic heart disease is as follows. 1)Myocardial perfusion SPECT with pharmacologic stress: A patient is injected with $^{99m}Tc$-MIBI 10 mCi and does not have any fatty food for myocardial PET examination and drink natural water with ursodeoxcholic acid 100 mg and we get SPECT image in an hour. 2)Myocardial FDG PET: To reduce blood fatty content and to increase uptake of FDG, we used creative oral glucose load using insulin and Acipimox to according to blood acid content. A patient is injected with $^{18}F$-FDG 5 mCi for reduction of his radiation exposure and we get a gated image an hour later and get delay image when we need. 3) Coronary CTA: The most important point is to control heart rate and to get cooperation of patient's breath. In order to reduce a heart rate of him or her below 65 beats, let him or her take beta blocker 50 mg ~ 200 mg after a consultation with a doctor about it and have breath-practices then have the examination. Right before the examination, we spray isosorbide dinitrate 3 to 5 times to lower tension of bessel wall and to extension a blood wall of a patient. It makes to get better the shape of an anatomy. At filming, a patient is injected CT contrast with high pressure and have enough practices before the examination in order to have no problem. For reduction of his radiation exposure, we have to do ECG-triggered X-ray tube modulation exposure. Results: We evaluate coronary artery stenosis through coronary CTA and study correlation (culprit vessel check) of a decline between stenosis and perfusion from the myocardial perfusion SPECT with pharmacologic stress, coronary CTA, and can check viability of infarction or hibernating myocardium by FDG PET. Conclusion: The examination makes us to set up a direction of remedy (drug treatment, PCI, CABG) because we can estimate of effect from remedy, lesion site and severity. In addition, we have an advantage that it takes just 3 hours and one-stop in that all of process of examinations run in succession and at the same time. Therefore it shows that the method is useful in one stop evaluation of ischemic heart disease.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.2
• /
• pp.155-170
• /
• 2021

Oats (Avena sativa L.) represent a good forage crop for cultivation in regions with short growing periods and/or cool weather, such as the mountainous areas of southern Korea. In this study, using the Korean elite summer oat varieties 'High speed' and 'Dark horse', we aimed to determine the optimal time to plant and harvest forage oats seeded in spring and summer in a mountainous area. Seeds were planted three times from late February and early August at 9- or 10-days intervals, respectively, and plants were harvested three times from late May to October at 10-day intervals. The experiment was carried out in an upland field (Jangsu-gun Jeonbuk) in 2015 and 2016. We investigated the changes in forage yield (FY) and quality [crude protein (CP) and total digestible nutrient (TDN) contents] based on the time of planting and harvest. Neither the forage quality nor yield of either spring and summer oats was significantly influenced by the time of planting. The CP of spring oats harvested three times at 10-day intervals from late May was 12.0%, 8.2%, and 6.5%, thereby indicating a reduction with a delay in the time of harvest. In summer oats, CP ranged from 8.4% to 8.7%, although unlike CP in spring oats, was not significantly influenced by the time of harvest. For both forage types, harvest time had no significant effect on TDN. The FY of spring oats harvested in late May and early and mid-June was 10.2, 18.7, and 19.5 ton ha^-1, respectively, with that of oats harvested on the latter two dates being significantly increased by 83% and 91%, respectively, compared with that in late May. Similarly, the FY of spring oats harvested in late October and early and mid-November was 7.1, 12.5, and 12.1 ton ha^-1, respectively, with that of oats harvested on the latter two dates being significantly increased by 75% and 71%, respectively, compared with that in late October. Taking into consideration forage yield and quality (not less than 8% CP), it would be profitable to plant spring oats in the mountainous areas of southern Korea until March 15 and harvest around June 10, whereas summer oats could be beneficially planted until August 25 and harvested from early November.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4602-4609
• /
• 2013

In summer and winter, the difference between the temperature during the day and that during the night is high, which leads to various problems during concrete placement, such as cracks and defects in the concrete as well as low durability and strength. Although nuclear power plant concrete is widely used for placement in all seasons, particular attention must be paid to its quality during the summer. Therefore, we evaluated the effects of a cooling method for mixing water, which is a commonly used hot weather precooling method, and the use of a retarder, on the characteristics of Nuclear Power Plant concrete. In the cooling method for mixing water, cold water at 5 was used, with 50% of the water content consisting of ice flakes. The effects of using a retarder were evaluated by reviewing the characteristics of the cement at the unset stage and after hardening. To evaluate the characteristics of the unset cement, we measured the slump, air volumes, setting times, and pressure strengths after hardening. Furthermore, we measured the heat of hydration at different temperatures; the loss of heat was minimized using insulation. Both the slump time and the complete ageing time of the air volume were found to be 120 min at $20^{\circ}C$ and 40 min at $40^{\circ}C$. In the case when the cooling method for mixing water was used and in the case when a retarder was used, the initial and final sets by penetration resistance were delayed, and the delay decreased with increasing air temperature. For the heat of hydration, the cooling method for mixing water not only lowered the maximum temperature but also delayed its attainment. However, the use of a retarder had no effect on the maximum temperature. Moreover, in the early ages (e.g., 3 and 7 days), the pressure strength of the concrete was lower than that of plain cement. However, the strength of 28-day concrete met the standard construction specifications.

• Journal of Aquaculture
• /
• v.20 no.4
• /
• pp.270-277
• /
• 2007

White spot syndrome virus (WSSV) which is the most serious threat to cultured shrimp around the world has given enormous economic damages to shrimp culture industry every year since it was found from the shrimp ponds in the west coast of the South Korea in 1993. WSSV has strong infectivity as well as virulence and it can be rapidly transmitted among shrimps in ponds by cannibalism of infected ones. Polyculture of shrimps with carnivorous fish has been applied in commercial shrimp farms to suppress or delay the viral outbreak because the fish may selectively eat the moribund shrimps infected by virus. To determine the selective predatory effect of a carnivorous fish, river puffer Takifugu obscurus on white shrimp Litopenaeus vannamei, polyculture trials in laboratory scale of WSSV-infected and non-infected shrimps with river puffer were conducted in concrete round tanks of $28.26\;m^2$ in surface area as followings: 1) juvenile shrimps (B. W. 0.62 g) with 5 months old puffer (B. W. 11.60 g) cultured for 8 days, and 2) sub-adult shrimps (B. W. 6.84 g) with 16 months old puffer (B. W. 85.82 g) cultured for 5 days in order to know the effects according to size difference of cultured animals. In polyculture of juvenile shrimp with 5 months old puffer, survival rates of infected and non-infected shrimps were 46.0% and 89.1% respectively and in that of sub-adult shrimp with 16 months old puffer those were4% and 48% respectively. The results showed that puffer tends to selectively prey on virus infected shrimps among infected and non-infected ones in a limited space with although there is difference in predatory rate with age and density of animals. Regardless of different densities and ages of animals as well as health condition of shrimps, however, there were low differences in daily biomass of shrimp consumed per kg body weight of puffer. This finding suggests that puffer preys on healthy shrimps when moribund shrimps were not sufficient. Therefore, farmers should consider the total biomass of puffer as well as density and stocking time when they stock puffer into shrimp ponds for polyculture.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.4
• /
• pp.341-348
• /
• 2010

The basic principle of fry drying process of sludge lies in the rapid pressure change of sludge material caused by the change of temperature between oil and moisture due to the difference of specific heat. Therefore, the rapid increase of pressure in drying sludge induces the efficient moisture escape through sludge pores toward heating oil media. The object of this study is to carry out a systematic investigation of the influence of various parameters associated with the sludge fry drying processes on the drying efficiency. To this end, a series of parametric experimental investigation has been made together with the numerical calculation in order to obtain typical drying curves as function of important parameters such as drying temperature, sludge diameter, oil type and sludge type. In the aspect of frying temperature, especially it is found that the operation higher than $140^{\circ}C$ was favorable in drying efficiency regardless of type of waste oil employed in this study. The same result was also noted consistently in the investigation of numerical calculation, that is, in that the sludge particle drying was efficiently made over $140^{\circ}C$ irrespective of the change of particle diameter. As expected, in general, the decrease of diameter in sludge was found efficient both experiment and numerical calculation in drying due to the increased surface area per unit volume. In the investigation of oil type and property, the effect of the viscosity of waste oil was found to be more influential in drying performance. In particular, when the oil with high viscosity, a visible time delay was noticed in moisture evaporation especially in the early stage of drying. However, the effect of high viscosity decreased significantly over the temperature of $140^{\circ}C$. There was no visible difference observed in the study of sludge type but the sewage sludge with a slightly better efficiency. The numerical study is considered to be a quite useful tool to assist in experiment with more detailed empirical modeling as further work.