• Computers and Concrete
• /
• v.20 no.1
• /
• pp.1-10
• /
• 2017

This paper focuses on the mesh-size dependency in numerical simulations of reinforced concrete (RC) structures subjected to blast loading. A tensile failure criterion that can minimize the mesh-dependency of simulation results is introduced based on the fracture energy theory. In addition, conventional plasticity based damage models for concrete such as the CSC model and the HJC model, which are widely used for blast analyses of concrete structures, are compared with the orthotropic model that adopts the introduced tensile failure criterion in blast tests to verify the proposed criterion. The numerical predictions of the time-displacement relations at the mid-span of RC beams subjected to blast loading are compared with experimental results. The analytical results show that the numerical error according to the change in the finite element mesh size is substantially reduced and the accuracy of the numerical results is improved by applying a unique failure strain value determined by the proposed criterion.

• Korean Journal of Veterinary Research
• /
• v.45 no.2
• /
• pp.287-296
• /
• 2005

This experiments was designed to observe the effect of period and dose of ingestion of grapes on renal failure in dog. After the dogs had been mixed of general feed, raisins from U.S.A and fresh grapes from Chile selling in Korea. We observed the clinical sign, and analyzed the blood and urine using by biochemical test. The experiment was executed by the two following groups. The experiment group 1. derived renal failure by supplying the mixed general feed with fresh grapes and dry grapes 15 g per weight kg, 2 times a day (AM 09, PM 21), the experiment group 2. executed to derive renal failure by supplying the mixed general feed with fresh grapes and dry grapes 40 g per weight kg, 2 times a day. Extraction of blood for analysis was conducted one time a day and clinical test for renal failure was executed by means of a blood analysis, biochemical analysis, urine analysis, excretory urography (E.U) and E.R.D-$screen^{TM}$ urine test (Heska, USA). The results of group 1 were normal ranges (BUN 9.0~22.6 mg/dl, creatinine 0.8~1.2 mg/dl, Ca 9.7~12.3 mg/dl, Pi 2.9~4.6 mg/dl), renal failure was not observed. On the 3rd day in group 2, azotemia was arisen from the increasing BUN 83 mg/dl (7~25 mg/dl), creatinine 2.3 mg/dl (0.5~1.4 mg/dl), when executed urine was tested by E.R.D-$screen^{TM}$ test using in the early kidney disease diagnosis, microalbumine state was high positive, and it showed stale delay by using excretory urography (EU). This study demonstrated that acute renal failure by grapes and raisins dependent on food dose, and specific characters of individual.

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.216-224
• /
• 2024

This paper presents a method for analyzing the reliability of hardware electronic equipment, taking into account failures caused by radiation. Traditional reliability analysis primarily focuses on the wear out failure rate and often neglects the impact of radiation failure rates. We calculate the wear out failure rate through physics of failure analysis, while the radiation failure rate is semi-empirically estimated using the Verilog Fault Injection tool. Our approach aims to ensure reliability early in the development process, potentially reducing development time and costs by identifying circuit vulnerabilities in advance. As an illustrative example, we conducted a reliability analysis on the ISCAS85 circuit. Our results demonstrate the effectiveness of our method compared to traditional reliability analysis tools. This thorough analysis is crucial for ensuring the reliability of FPGAs in environments with high radiation exposure, such as in aviation and space applications.

• Corrosion Science and Technology
• /
• v.6 no.2
• /
• pp.50-55
• /
• 2007

The smaller size and higher integration of advanced electronic package systems result in severe electrochemical reliability issues in microelectronic packaging due to higher electric field under high temperature and humidity conditions. Under these harsh conditions, electronic components respond to applied voltages by electrochemical ionization of metal and the formation of a filament, which leads to short-circuit failure of an electronic component, which is termed electrochemical migration. This work aims to evaluate electrochemical migration susceptibility of the pure Sn, Sn-3.5Ag, Sn-3.0Ag-0.5Cu solder alloys in $Na_{2}SO_{4}$. The water drop test was performed to understand the failure mechanism in a pad patterned solder alloy. The polarization test and anodic dissolution test were performed, and ionic species and concentration were analyzed. Ag and Cu additions increased the time to failure of Pb-free solder in 0.001 wt% $Na_{2}SO_{4}$ solution at room temperature and the dendrite was mainly composed of Sn regardless of the solders. In the case of SnAg solders, when Ag and Cu added to the solders, Ag and Cu improved the passivation behavior and pitting corrosion resistance and formed inert intermetallic compounds and thus the dissolution of Ag and Cu was suppressed; only Sn was dissolved. If ionic species is mainly Sn ion, dissolution content than cathodic deposition efficiency will affect the composition of the dendrite. Therefore, Ag and Cu additions improve the electrochemical migration resistance of SnAg and SnAgCu solders.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.569-570
• /
• 2022

Failure situations occur frequently in the industry, and the existing 2D-based manual for this purpose is not intuitive to understand and it is difficult to immediately interact with maintenance experts. In this paper, we propose a technology that enables workers to perform maintenance in real time with the help of experts without restrictions in time and place based on augmented reality when a failure situation occurs at a remote location. A local virtual human-based expert diagnoses a failure situation based on an adapted panoramic image of a remote failure situation while wearing an HMD headset, and gives instructions to a remote operator. In addition, in an augmented reality (AR) environment in a remote location, for the interaction between the operator and the expert, the HMD's microphone is used to create the expert's hand as well as verbal communication. You can use to point or draw a picture. If this technology is used, it is possible to overcome the limitations of the existing 2D-based manual, and to provide assistance in performing maintenance smoothly remotely even if an expert does not directly visit a remote location.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.147-150
• /
• 1988

Since the integration level of VLSI circuits progresses very quickly, a highly reliable thin $SiO_2$ film is required to fabricate a small-geometry MOS device. In the present study we have attempted to eliminate the failure-causing defects that develop in thin oxide films during the oxidation step by performing a long-time preoxidation and postoxidation annealing. The TDDB test and the copper decoration method were used to calculate the oxide defects density of MOS device. The dielectric reliability of high-quality thin oxides have been studied by using the time-zero-dielectric-breakdown (ramp-voltage-stressed I-V) and time-dependent-dielectric -breakdown (Constant-stressed I-V) tests. Failure times against temperature and electric field are examined and acceleration factors are abtained for each parameter. Based on the data obtained, breakdown wearout limitation for thin oxide films is estimated.

• Structural Engineering and Mechanics
• /
• v.22 no.2
• /
• pp.197-222
• /
• 2006

In this paper, the non-linear time-dependent closed-form, discrete and combined solutions for the post-elastic response of a geometrically and physically non-linear suspended cable to a uniformly distributed load considering the creep effects, are presented. The time-dependent closed-form method for the particularly straightforward determination of a vertical uniformly distributed load applied over the entire span of a cable and the accompanying deflection at time t corresponding to the elastic limit and/or to the elastic region, post-elastic and failure range of a suspended cable is described. The actual stress-strain properties of steel cables as well as creep of cables and their rheological characteristics are considered. In this solution, applying the Irvine's theory, the direct use of experimental data, such as the actual stress-strain and strain-time properties of high-strength steel cables, is implemented. The results obtained by the closed-form solution, i.e., a load corresponding to the elastic limit, post-elastic and failure range at time t, enable the direct use in the discrete non-linear time-dependent post-elastic analysis of a suspended cable. This initial value of load is necessary for the non-linear time-dependent elastic and post-elastic discrete analysis, concerning incremental and iterative solution strategies with tangent modulus concept. At each time step, the suspended cable is analyzed under the applied load and imposed deformations originated due to creep. This combined time-dependent approach, based on the closed-form solution and on the FEM, allows a prediction of the required load that occurs in the post-elastic region. The application of the described methods and derived equations is illustrated by numerical examples.

• Journal of Applied Reliability
• /
• v.11 no.1
• /
• pp.43-57
• /
• 2011

In the paper, we consider two-dimensional warranty policy with failure times and repair times. The failure times are considered within the warranty period and the repair times are considered within the repair time limit. Under the renewable warranty policy and non-renewable warranty policy, we consider the number of warranty services in the censored area by warranty period and repair time limit to conduct warranty cost analysis. We investigate the field data to check their dependency and implement our proposed approaches to conduct warranty cost analysis using the parametric methods. Numerical examples are discussed to demonstrate the applicability of the methodologies and results based on the proposed approach in the paper.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.993-999
• /
• 2007

With the introduction of the RAMS(Reliability, Availability, Maintainability, Safety), the interest of the system assurance has been increased. First of all, fast-growing electronic circuit requires analyzing the failure rates, by dividing the signalling system more specifically. Since 2005, the K.N.R (Korean National Railway) has incorporated ERP(Enterprise Resource Planning) in order to establish the complete status as the top international comprise, therefore while ordering the project, it has established the classification system and then has been applying to ERP system in 2007. Due to the complex of the classification system, the reliability analysis of the signalling system was assessed with the limit of IXL ATP with On-board and wayside equipment. This paper assumed MTBF(Mean Time Between Failure), MTTR((Mean Time Between Repair) of total signalling system, by using the classification of ERP program.

• Communications for Statistical Applications and Methods
• /
• v.24 no.1
• /
• pp.29-41
• /
• 2017

The estimation problem of expected time to failure of units is studied in a discrete set up. A simple step-stress accelerated life testing is considered with a Type-I censored sample from geometric distribution that is a commonly used distribution to model the lifetime of a device in discrete case. Maximum likelihood estimators as well as the associated distributions are derived. Exact, approximate and bootstrap approaches construct confidence intervals that are compared via a simulation study. Optimal confidence intervals are suggested in view of the expected width and coverage probability criteria. An illustrative example is also presented to explain the results of the paper. Finally, some conclusions are stated.