• Nuclear Engineering and Technology
• /
• v.53 no.3
• /
• pp.932-941
• /
• 2021

This paper suggests a fracture simulation method for SFR metallic fuel pin under accident condition. Two major failure mechanisms - creep damage and eutectic penetration - are implemented in the suggested method. To simulate damaged element, stress-reduction concept to reduce stiffness of the damaged element is applied. Using the proposed method, the failure size of cladding can be predicted in addition to the failure time and failure site. To verify the suggested method, Whole-pin furnace (WPF) test and TREAT-M test conducted at Argonne National Laboratory (ANL) are simulated. In all cases, predicted results and experimental results are overall in good agreement. Based on the simulation result, the effect of eutectic-penetration depth representing failure behavior on failure size is studied.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.4
• /
• pp.91-101
• /
• 2001

This paper is to develop replacement models under minimal repair with exponential polynomial wavelet failure rate function. Wavelets have good time-frequency localization, fast algorithms and parsimonious representation. Also this study is presented along with numerical examples using sensitivity analysis for exponential polynomial trigonometric failure rate function.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1007-1015
• /
• 2013

A stochastic probability model based on the non-homogeneous Poisson process is represented that can correctly analyze the time-dependent linear and nonlinear behaviors of total damage over the occurrence process of loads. Introducing several types of damage intensity functions, the probability of failure and the total damage with respect to mean time to failure has been investigated in detail. Taking particularly the limit state to be the random variables followed with a distribution function, the uncertainty of that would be taken into consideration in this paper. In addition, the stochastic probability model has been straightforwardly applied to the rubble-mound breakwaters with the definition of damage level about the erosion of armor units. The probability of failure and the nonlinear total damage with respect to mean time to failure has been analyzed with the damage intensity functions for armor units estimated by fitting the expected total damage to the experimental datum. Based on the present results from the stochastic probability model, the preventive management for the armor units of the rubble-mound breakwaters would be suggested to make a decision on the repairing time and the minimum amounts repaired quantitatively.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.440-445
• /
• 2008

The failure mechanism and failure morphology of linear low density polyethylene (LLDPE) tubing under hydrostatic pressure were investigated. Microscopic observations using video microscope and scanning electron microscope indicate that the failure mode is a brittle fracture including cracks propagated from inner wall to outer wall. In addition, oxidation induction time and Fourier transform infrared spectroscopy results show the presence of exothermic peak and the increase in carbonyl index on the surface of fractured LLDPE tubing, due to thermal-degradation. An accelerated life test methodology and testing system for LLDPE tubing are developed using the relationship between stresses and life characteristics by means of thermal acceleration. Statistical approaches using the Arrhenius model and Weibull distribution are implemented to estimate the long-term life time of LLDPE tubing under hydrostatic pressure. Consequently, the long-term life time of LLDPE tubing at the operating temperature of $25^{\circ}C$ could be predicted and also be analyzed.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.4
• /
• pp.63-68
• /
• 2006

This research presents the reliability analysis of the pneumatic actuator within the tape feeder that is used to transfer the correct force to linked parts during l.0E+7 cycles. First, the degradation analysis for thrust and air leakage is executed to obtain the failure data of a product based on its performance over time. Second, once the parameters has been calculated using the weibull 2-parameter distribution and MLE(Maximum Likelihood Estimation), information related to life such as reliability, failure rate, probability density function is estimated. Finally, MTTF(Mean Time To Failure) and $B_{10}$ life of actuators are calculated. MTTF means the mean life at the confidence level and $B_{10}$ life refers to the time by which 10% of the product would fail. In this study, failure causes and solutions are examined using the reliability analysis.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.709-712
• /
• 1999

This paper was aimed to investigate the shear strengthening effect of the pre-loaded reinforced concrete beams strengthened by carbon fiber sheet (CFS). Main tet parameters was the magnitude of pre-loading at the time of the retrofit and the strengthening method of carbon fiber sheet. A series of nine specimens was tested to evaluate the corresponding effect of each parameters such as maximum load capacity, load-deflection relationship, and failure mode. The results of this study showed that the failure mode is bonding failure between the concrete and the CFS before the tensile failure strain of the CFS is reached.

• International Journal of Reliability and Applications
• /
• v.10 no.1
• /
• pp.43-57
• /
• 2009

In this article, we study the reliability equivalence factor of a series system. The failure rates of the system components are functions of time t. we study two cases of non-constat failure rates (i) weibull distribution (ii) linear increasing failure rate distribution. There are two methods are used to improve the given system. Two types of reliability equivalence factors are discussed. Numerical examples are presented to interpret how one can utilize the obtained results.

• Korean Journal of Clinical Pharmacy
• /
• v.12 no.2
• /
• pp.91-95
• /
• 2002

The pharmacokinetics of intravenous paclitaxel (1 mg/kg) were investigated in rabbits with renal failure induced by folic acid. The area under the plasma concentration-time curve from time zero to time infinity (AUC) of paclitaxel was significantly (p<0.05) greater in rabbits with severe renal failure induced by folic acid $(1030\pm382)$ compared to that in rabbits with in moderate renal failure induced by folic acid $(780\pm209\;ng/ml{\cdot}hr)$. The apparent volume of distribution (Vd) $(0.008\pm0.002\;L/kg)$ and the elimination rate constant $(\beta)\;(0.09\pm0.025\;hr^{-1})$ of paclitaxel in rabbits with severe renal failure were significantly (p<0.05) smaller and slower respectively than those of control rabbits $(0.016\pm0.004\;L/kg,\;0.12\pm0.03\;hr^{-1})$, but not significantly different compared with that in rabbits with moderate renal failure $(0.010\pm0.003\;L/kg,\;0.10\pm0.026\;hr^{-1})$. total body clearance (CL) of paclitaxel in rabbits with severe renal failure $(0.97\pm0.183\;L/hr/kg)$ was significantly (p<0.05) slower than that in control rabbits $(1.68\pm0.440\;L/hr/kg)$, but not significantly different compared with that in rabbits with in moderate renal failure $(1.28\pm0.311\;L/hr/kg)$. The terminal half-life ($t_{1/2}$) of paclitaxel in rabbits with severe renal failure $(7.46\pm2.16\;hr)$ was significantly (p<0.05) longer than that in control rabbits $(5.75\pm1.44\;hr)$, but not significantly different compared to that in rabbits with moderate renal failure rabbits $(6.67\pm1.76\;hr)$. The above data could be at least partly decrease in due to paclitaxel excretion in rabbits with renal failure, since $7-15\%$ of interavenous paclitaxel was excreted via kidney as unchanged forms plus its metablites.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.1
• /
• pp.36-43
• /
• 2015

Recently, a number of evaluation studies on availability of plant were carried out. This study was conducted to verify of the reliability of a simulation with some variable such as configuration of process, failure probability density function and the number of iteration times for the natural gas liquefaction plant. The error rate of the KICT-RAM solution was evaluated as 0.03~1.79% compared with the result of the MAROS(commercial solution). And the error-rate change was observed in the range of 0.03~1.75 on the condition of the iteration times as 30, 100, 250. As a result the plant availability evaluation approach of KICT-RAM solution was verified as reasonable. However, the careful approach was required to use the solution because the error-rate increased according to iteration times change.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.128-135
• /
• 2000

This paper considers a consecutive k-out-of-n:F system when the failure of a component in the system induces higher failure rate of the preceding survivor. The reliability, mean time to failure(MTTF), and average failure number of a consecutive k-out-of-n:F system are obtained, when the failure of a component increases the failure rate of the survivor which is working just before the failed component. Then the optimal number of consecutive failed components to minimize this long run average cost rate can be obtained. An example is considered to calculate the reliability, MTTF and average failure number of the system. And two procedures that find the optimal number of consecutive failed components are studied. Then, various cases of system parameters are also studied.