Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study on the Reliability Analysis for the High Precision Pneumatic Actuator within Tape Feeder

테이프 피더 내장 공압 액추에이터에 대한 신뢰성 평가에 관한 연구

  • 최진화 (인하대학교 산업과학기술연구소) ;
  • 전병철 (인하대학교 산업과학기술연구소) ;
  • 조명우 (인하대학교 기계공학부) ;
  • 강성민 ((주)프로텍 부설연구소) ;
  • 이수진 ((주)프로텍 부설연구소)
  • Published : 2006.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

This research presents the reliability analysis of the pneumatic actuator within the tape feeder that is used to transfer the correct force to linked parts during l.0E+7 cycles. First, the degradation analysis for thrust and air leakage is executed to obtain the failure data of a product based on its performance over time. Second, once the parameters has been calculated using the weibull 2-parameter distribution and MLE(Maximum Likelihood Estimation), information related to life such as reliability, failure rate, probability density function is estimated. Finally, MTTF(Mean Time To Failure) and $B_{10}$ life of actuators are calculated. MTTF means the mean life at the confidence level and $B_{10}$ life refers to the time by which 10% of the product would fail. In this study, failure causes and solutions are examined using the reliability analysis.

Keywords

References

  1. Cho, T. H. and Lee, S. J., 2002, 'An Inspection System for Measuring Feeding Accuracy of Tape Feeders,' Journal of Control, Automation and Systems Engineering, Vol. 8, No. 7, pp. 573-577 https://doi.org/10.5302/J.ICROS.2002.8.7.573
  2. Lee, S. H., Kim, J. S., Song, J. Y., Lee, S. W. and Park, H. Y., 2001, 'A study on Reliability Data Analysis for Components of Machining Center,' KSPE Conference, Vol. 1, No. 1, pp. 88-91
  3. Lee, S. W., Song, J. Y., Hwang, J. H., Lee, H. Y. and Park, H. Y., 2001, 'Method and Application of Reliability Evaluation for Core Unites of Machine Tools,' KSPE Conference, Vol. 1, No. 1, pp. 43e-46
  4. Lee, H. Y., Park, J. K. and Song, J. Y., 2001, 'A Case Study on Reliability Analysis of Machining Center,' KSMTE Conference, Vol. 1, No. 1, pp. 418-421
  5. Kim, B. S., Kim, J. S., Lee, S. H., Song, J. Y. and Park, H. Y., 2001, 'A Study on Failure Mode Analysis of Machining Center,' Journal of the Korean Society of Precision Engineering, Vol. 18, No. 6, pp. 74-79
  6. Moon, J. S., Kim, J. W., Shin, J. C. and Kim, M. S., 2005, 'Reliability Estimation of Door Hinge for Home Appliances,' Journal of the Korean Society of Mechanical Engineers, Vol. 29, No. 5, pp. 689-697 https://doi.org/10.3795/KSME-A.2005.29.5.689
  7. Kim, B. S., Lee, S. H., Song, J. Y. and Lee, S. W., 2005, 'Reliability Assessment of Machine Tools Using Failure Mode Analysis Programs,' Journal of the Korean Society of Machine Tool Engineers, Vol. 14, No. 1, pp. 15-23
  8. Nelson, W., 1985, 'Weibull Analysis of Reliability Data with few or no failure,' Journal of Quality Technology, Vol. 17, No. 3, pp. 140-160 https://doi.org/10.1080/00224065.1985.11978953