• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.174-178
• /
• 2010

일반적으로 설계홍수량은 강우빈도 해석으로 설계강우량을 결정하고 이를 유역유출모형에 적용하여 계산된 유출량을 정상류모의를 통하여 산정하게 된다. 이러한 기존의 설계홍수량 산정방법은 설계강우량 산정에 있어 임의성을 포함하게 된다. 따라서 본 연구에서는 대상 하천 구간의 실측 수위자료를 사용하여 홍수량을 산정하는 방법을 제시하고자 한다. 분석대상 자료로서 남한강 여주지점의 실측 시유량을 선정하였으며 충주댐 완공 이후인 1988년부터 2007년까지의 기간을 대상으로 하였다. 빈도해석을 위한 분석 자료군을 연최대치 계열과 POT(Peaks Over Threshold) 계열의 두 가지 그룹으로 추출하여 홍수량을 추정하였다. 연최대치 계열 분석 결과 Weibull 분포를 적절한 분포형으로 선정하였으며 부분시계열 POT 빈도해석을 수집자료 전체와 기간을 전, 후 10년씩 나눈 세 그룹으로 나누어 수행하였다. 빈도별 확률홍수량 추정 결과 연최대치 계열을 사용한 결과가 부분시계열 POT 방법을 사용한 결과보다 크게 산정되었으며 자료 전체 기간에 대한 POT 빈도해석 결과보다 최근 10년간의 자료를 사용한 결과가 더 크게 나타나 홍수량의 증가 경향을 확인 할 수 있었다.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.1
• /
• pp.57-66
• /
• 2019

One of the most serious problems with concrete small dams or barriers installed in small/median rivers is the deposit of sediments, especially, in Korea. An effective way to discharge such sediments to downstream is to construct a bypass pipe under the river bed. However, efficiency may become lowered if ripraps are entered into the bypass pipe. Therefore, in this study, we derived the threshold condition for the exclusion of ripraps from the bypass pipe using 3D numerical analysis. Upstream flow of the small dam was assumed to be stationary, and the energy concept was applied to the control volume containing the bypass pipe and its periphery. As a result, when the ratio of the water level difference between upstream and downstream to the diameter of the riprap was approximately equal to 1.2, the threshold condition for exclusion of the stones or riprap from the bypass pipe was affirmatively determined. If the characteristics of the adsorptive sediment adversely affecting the river environment in the future would be taken into account, results from this study are expected to put to practical use in the management of concrete small dam with bypass pipe system.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2006

Hot carrier degradation and roll off characteristics of threshold voltage ($V_{t1}$) on NMOSFETs as I/O transistor are studied as a function of Lightly Doped Drain (LDD) structures. Pocket dose and the combination of Phosphorus (P) and Arsenic (As) dose are applied to control $V_{t1}$ roll off down to the $10\%$ gate length margin. It was seen that the relationship between $V_{t1}$ roll off characteristic and substrate current depends on P dopant dose. For the first time, we found that the n-p-n transistor triggering voltage ($V_{t1}$) depends on drain current, and both $I_{t2}$ and snapback holding voltage ($V_{sp}$) depend on the substrate current by characterization with a transmission line pulse generator. Also it was found that the improved lifetime for hot carrier stress could be obtained by controlling the P dose as loosing the $V_{t1}$ roll off margin. This study suggests that the trade-off characteristic between gate length margin and channel hot carrier (CHC) lifetime in NMOSFETs should be determined by considering Electrostatic Discharge (ESD) characteristic.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3480-3486
• /
• 2009

This research was based on the purpose of establishing predicted model of prematurely discharged patients using the mandatory information data, recorded in the medical institutes based on discharged patients of a University Hospital for the period of 1 year, from July. The result showed that the regression analysis model was the most excellent method of application model for preventing discharged patients, and when this is applied to discharged patients who are outpatients, the possibility of discharge can be less than staying in the emergency room. In addition, based on threshold 0.7, when we expect the discharged patients, out of 920 discharged patients, the actual patients who are discharged can become 136, showing the extract effectiveness of 14.78%. Based on the perspective of lift value, compared to random extract, this is 2.9 times (14.78/5.15) more effective.

• The Korean Journal of Physiology
• /
• v.24 no.2
• /
• pp.305-317
• /
• 1990

The present study was performed to investigate modification in the electrophysiological characteristics of cat dorsal horn cells during neurogenic inflammation induced by mustard oil. The results obtained were summarized as follows: 1) Following subcutaneous injection of mustard oil the majority of wide dynamic range (WDR) cells (10/15 units) showed enhanced responses (80%) to brush, while the responses to all types of mechanical stiumli were enhanced in 3/15 units. One cell was further activated by pinch and the another was not affected at all after induction of inflammation. 2) The sensitization of WDR cell was resulted from subcutaneous injection of mustard oil either inside or outside of the receptive field (RF), whereas the spontaneous activity increased only after mustard oil was injected inside of the RF. 3) In the animal with inflammation the responses of high threshold (HT) cell to noxious stimulus were not altered, while HT cell responded to such mechanical stimulus as pressure which was usually ineffective in normal animals. 4) After induction of inflammation, low threshold (LT) cell appeared to be converted to WDR cell, showing responses not only to brush but also to pressure and pinch. 5) The mustard oil-induced inflammation enhanced responses of WDR and HT cells to the thermal stimuli and also resulted in a pronounced after-discharge in WDR cells. 6) After subcutaneous injection of lidocaine, the increased background activity of WDR cells due to inflammation was almost completely abolished. 7) A subcutaneous injection of mustard oil inside of the RF invariably desensitized the dorsal horn cells which receive sensory inputs from the inflamed RF. From the results of Present study it was revealed that a neurogenic inflammation induced by mustard oil resulted in an enhancement of responses of cat dorsal horn cells to mechanical and thermal stimuli.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.6
• /
• pp.78-84
• /
• 2009

This paper presents measurement results of transient impedance for small-sized ground electrodes in a discharge region of soil. For a realistic analysis of ionization characteristics near the ground electrode, three types of ground rod installed outdoors and high voltage impulse generator were used for injecting test current. From the analysis of response voltage and current flowing ground electrode to earth, it is verified that the ionization near the ground electrode contributes to reduction of ground impedance and limits the ground potential rise effectively in high resistivity soil. As a threshold electric field density for ionization is small in low resistivity soil, the shape of ground electrode rarely contributes to the transient impedance. And, from the experiment result with shape of ground electrode, the rod with needles is more effective to reduce the transient impedance than the plate electrode in the voltage range including with ionization regions of soil.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.83-91
• /
• 2007

An experimental verification of multipactor(MP) discharge for S-band diplexer as a sample DUT for space application by an in-house MP test facility is proposed. The designed diplexer having two BPFs for Rx and Tx is applied to a design of five pole inter-digital cavity type band pass filter with chebyshev response, it has 2.7 % bandwidth centered at 2.232 and 2.055 GHz for Rx, Tx, respectively. To avoid the MP discharge, the accurate design and analysis methods based on 3D EM field analysis are considered. The proposed in-house MP test facility consists of a phase detecting system using a doubly balanced mixer as a simple, low cost and real time MP test method compared with results of previously well-known MP detection systems as cross reference methods. The calculated MP threshold RF input power is 43.13 dBm. The measured one is 43 dBm and 44 dBm for CW, pulsed mode test, respectively.

• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.67-75
• /
• 2008

The electrostatic charging/discharging mechanism and its effects, and the system design considerations in the space plasma environment are studied in this paper. The electrostatic discharge (ESD) effects are carefully taken into account for a design of the satellite system at the early stage of the development. Generally, the electrical design requirements are specified to protect the satellite system from the ESD effects in the electromagnetic compatibility specifications. Those requirements are included the grounding, the bonding, the shielding, the conductive coating, the electric interfacing and so on. The space charging is caused by the increasing of the voltage difference between the each locations on the satellite surface. If the space charging is continued up to threshold, it may be occurred the system failure. This phenomenon is depended on the mission of system, electrical and mechanical configuration, system operation, and orbit condition. Therefore the related requirements are properly tailored and concentrated into the safety design.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.521-522
• /
• 2006

In this paper, hybrid air-water discharges were used to develop an optimal condition for providing a high level of water decomposition for hydrogen yield. Electrical and optical phenomena accompanying the discharges were investigated along with feeding gases, flow rates, and point-to-plane electrode gap distance. The primary focus of this experiment was put on the optical emission of the near UV range, with the energy threshold sufficient for water dissociation and excitation. The $OH(A^{2+},'=0\;X^2,"=0$) band's optical emission intensity indicated the presence of plasma chemical reactions involving hydrogen formation. In the gaseous atmosphere saturated with water vapor the OH(A-X) band intensity was relatively high compared to the liquid and transient phases although the optical emission strongly depended on the flow rate and type of feeding gas. In the gaseous phase discharge phenomenon for Ar carrier gas transformed into a gliding arc via the flow rate growth. OH(A-X) band's intensity increased according to the flow rate or residence time of He feeding gas. Reciprocal tendency was acquired for $N_2$ and Ar carrier gases. The peak value of OH(A-X) intensity was observed in the proximity of the water surface, however in the cases of Ar and $N_2$ with 0.5 SLM flow rate peaks shifted to the region below the water surface. Rotational temperature ($T_{rot}$) was estimated to be in the range of 900-3600 K, according to the carrier gas and flow rate, which corresponds to the arc-like-streamer discharge.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.157-163
• /
• 2011

In this study, after the target basin was divided into both overland and channel grids, the travel time from center of each grid cell to watershed's outlet was calculated based on the manning equation. Through this process, volumetric discharge was calculated according to the isochrones and finally, the direct runoff hydrograph was estimated considering watershed's hydrodynamic characteristics. Sanseong subwatershed located in main stream of Bocheong basin was selected as a target basin. The model parameters are only two: area threshold and channel velocity correction factor; the optimized values were estimated at 3,800 and 3.3, respectively. The developed model based on the tuned parameters led to well-matching results between observed and calculated hydrographs (mean of absolute error of peak discharge: 3.41%, mean of absolute error of peak time: 0.67 hr). Moreover, the analysis results regarding histogram of travel time-contribution area demonstrates that the proposed model characterizes relatively well hydrodynamic characteristics of the catchment due to effective rainfall.