• 제목/요약/키워드: three-phase dc-dc converter

검색결과 327건 처리시간 0.025초

3상 AC-DC Boost 컨버터를 이용한 배터리 충전장치 (The Battery Charger Using Three-Phase AC-DC Boost Converter)

  • 하인용;이정효;김진홍;원충연
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2010년도 하계학술대회 논문집
    • /
    • pp.19-20
    • /
    • 2010
  • 본 논문에서는 3상 AC-DC Boost 컨버터를 이용한 상용차 용 배터리 충전장치를 제안한다. 논문에서 제안한 3상 AC-DC Boost 컨버터는 SVPWM 방식을 적용하였으며, ${V_q}^*$ 전압으로 전압 제어기에 보상하여 오버슈트를 개선하였으며. 정 전류 제어와, 정 전압 제어를 통하여 배터리를 충전을 수행하였다.

  • PDF

슬라이딩 모드 제어기를 이용한 직류(DC)배전용 3상 AC/DC컨버터의 소프트 스타트 운전기법 (Soft-Start Method of Three Phase AC/DC converter for DC Distribution System Using Sliding Mode Controller.)

  • 박현우;신수철;엄주경;이택기;이경호;원충연
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2010년도 추계학술대회
    • /
    • pp.186-187
    • /
    • 2010
  • 최근 직류 출력을 갖는 분산전원 시스템의 증가와 높은 에너지 변환효율을 갖는 직류(DC) 배전 시스템에 대한 관심이 증가하고 있다. 직류(DC) 배전을 빌딩에 적용하기 위해서는 계통연계형 AC/DC 컨버터가 필수적이다. 빌딩용 직류(DC)배전 시스템에서는 다양한 부하들이 상시 대용량의 AC/DC 컨버터에 연결되어 있기 때문에 컨버터의 기동시 과도상태를 최소화한 안정적인 DC전압 확보가 필수적이다. 본 논문에서는 외부 파라미터 변화나 외란에 대한 강인한 성능을 가지는 슬라이딩 모드 제어기를 사용하여 3상 AC/DC 컨버터의 초기 운전 시 발생할 수 있는 DC전압의 오버슈트 저감을 시뮬레이션에 의해 검증하였다.

  • PDF

1차측 환류 다이오드를 제거한 ZVZCS Three Level DC/DC 컨버터에 관한 연구 (A Study on the ZVZCS Three Level DC/DC Converter without Primary Freewheeling Diodes)

  • 배진용;김용;백수현;권순도;김필수;계상범
    • 조명전기설비학회논문지
    • /
    • 제16권6호
    • /
    • pp.66-73
    • /
    • 2002
  • 본 논문에서는 1차측 환류 다이오드를 제거한 ZVZCS(영전압 영전류 스위칭) Three Level DC/DC 컨버터에 관하여 논하였다. 제안된 컨버터는 1차측 회로를 Three Level 결선하고, 여기에 위상이동 스위칭 방법을 이용하여, 스위치 전압 스트레스를 저감시킬 수 있으므로, 기존의 Full-Bridge 컨버터에 비하여 스위칭 손실이 적고, 고전압 응용 분야에 적합하다. 기존의 경우 2차측에 한 개의 커패시터와 두 개의 다이오드를 이용한 보조회로를 부가하여, 누설 인덕터와 2차측 보조 커패시터를 이용하여 공진을 일으킴으로써 주 스위치의 영전압 영전류 스위칭(ZVZCS)이 가능하였다. 그러나 새로운 컨버터는 기존의 보조 회로에 결합 인덕터를 추가함으로써, 누설 인덕터, 2차측 보조 커패시터, 2차측 결합 인덕터가 공진을 일으키므로 기존의 경우보다 도전 손실이 저감된 고효율 컨버터를 구현할 수 있다. 또한 1차측 순환 전류의 현저한 감소로 환류 손실이 작아지며, 1차측에 환류 다이오드를 제거한 경제적인 Three Level 컨버터를 구현하였다. 본 논문에서는 제안된 컨버터의 동작원리, 해석 및 특성에 대해서 논하였으며, IGBT를 사용하여 1[㎾]급 시작품을 제작, 50[KHz]에서 실험하였다.

연료전지 전기자동차 전력 구동시스템 분석 및 전동기 구동시스템 제어기 설계 (Motor Drive System Analysis and Controller Design for Fuel cell Electronics Vehicle)

  • 이명진;박인덕;김시경
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.484-486
    • /
    • 2004
  • In this paper, the power electronics requirement and the controls of an induction motor for fuel cell electric vehicle system are presented. The power topology is selected based on performance, cost, size, volume, manufacturability, component count and simplicity. Another highlight of the topology is the reduction of battery bank and its control strategy. The proposed approach consists a full-bridge DC/DC converter to boost the fuel cell voltage. The induction motor operated with vector control is driven by a three-phase PWM inverter supplied by the DC-link voltage. The investigation of the electric vehicle performed due to parameter variation of the induction motor has been presented.

  • PDF

BTB 전압형 컨버터 기반의 전기철도 급전변전 시스템의 기본 모델링 및 해석 (Basic Modeling and Analysis for AC Railway System based on BTB Voltage Source Converter)

  • 유형준;김학만;정호성
    • 전기학회논문지
    • /
    • 제61권11호
    • /
    • pp.1737-1742
    • /
    • 2012
  • The scott transformer is used to supply single-phase power to the AC railway system. Since the scott transformer is a passive facility, it cannot regulate load-side voltage according to load change. Meanwhile, the Voltage Source Converter (VSC) is able to convert the voltage and control active and reactive power. In this paper, the feasibility of a AC railway system based on Back-to-Back (BTB) VSC which is composed of a rectifier, a DC-DC converter, a inverter, has been proposed. A three-phase to single-phase BTB VSC is modeled. The proposed AC railway system based on BTB VSC is tested on Matlab/Simulink.

VIENNA 정류기를 이용한 입력파형의 개선 (Improvement of Input Wave Using VIENNA Rectifier)

  • 정헌선;노세진;최재호;정교범
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2007년도 하계학술대회 논문집
    • /
    • pp.19-21
    • /
    • 2007
  • This paper proposes an input waveform improvement using VIENNA Rectifier(three-phase/level/switch). VIENNA Rectifier is based on the combination of a three-phase diode bridge and dc/dc converter. It features low input current ripple and sinusoidal mains current form.

  • PDF

AC Filter Capacitor 에 따른 진상 전류 보상 회로를 갖는 $3{\phi}$ PWM AC/DC 컨버터 (Three Phase PWM AC/DC Converter with Leading Current Compensation Control)

  • 김은수;조기연;서기영;이현우;권순걸
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 하계학술대회 논문집 A
    • /
    • pp.268-270
    • /
    • 1995
  • This paper proposes a novel PWM technique for a three phase current fad type converters. A minor loop compensation method is introduced to compensate leading current and to minimize input line current (Iu) distortion resulting from the resonance between AC filter capacitor and source inductance of power system. This PWM converter has excellent characterics as next. The control system is simply designed, and the operation with unity power factor can be easily obtained by automatic compensating the leading current of the filter circuit. Also. the three phase sinusoidal input current can be obtained.

  • PDF

전 영역 ZVS가 가능한 양방향 3상 절연형 인터리브드 DC-DC 컨버터의 제어방법 (Control Method of Bi-Directional ZVS Three-Phase Isolated Interleaved DC-DC Converter)

  • 이일용;이병하;차한주
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2012년도 전력전자학술대회 논문집
    • /
    • pp.337-338
    • /
    • 2012
  • 본 논문에서는 전 영역 ZVS가 가능한 양방향 3상 절연형 인터리브드 DC-DC 컨버터의 제어방법에 대해 서술한다. 3상 절연형 인터리브드 DC-DC 컨버터는 모든 스위치가 ZVS동작을 하여 높은 효율을 갖고 3상 구조를 채택하여 전류경로의 분산을 통한 전력전달 능력의 증대 효과 및 입력전류 리플 크기를 줄여주는 인터리브드 효과를 갖는다. 승압/강압 능력이 있는 부스트/벅 컨버터의 구조는 낮은 권선비의 변압기로 높은 승압/강압 전력변환, 에너지원과 부하 사이에 절연이 가능한 구조이며, 인터리브 동작이 이루어짐에도 불구하고 3상을 각각 제어하지 않고 배터리의 전압전류와 출력전압만을 입력받아 벅모드와 부스트 모드 모두 전압, 전류제어를 수행함으로서 시스템의 간략화가 가능하였다. 따라서 본 논문에서는 제안된 DC-DC컨버터의 제어기를 구성하고 실험을 통해 확인하였다.

  • PDF

단상제어형 3상 PWM 승압용 컨버터의 시뮬레이션 (Simulation of three Phase PWM Boost converter)

  • 강욱중;김상돈;전중함;이광수;서기영;이현우
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 F
    • /
    • pp.2668-2670
    • /
    • 1999
  • In the past, the PWM converter had a large switching loss by hard switching and difficult to high frequency operation. The resonance converter to decrease the switching loss and EMI is required the frequency control and needed to reduce the voltage or current stress at each parts. So, this paper propose the 3-phase boost converter and the method to compensated input power factor by control the amplitude - an instantaneous value of the DC inductor current -and control the switching frequency that a modulation error by the ripple of the DC inductor current. The proposed 3-phase PWM boost converter of single phase control type can takes higher capacity and compensate the power factor by using Feed back controller at each phase for the existing 3-phase bridge rectifier type. Moreover the 3-phase full bridge type using the rectifier at each 3-phase circuit will be small size reactor and compensate input power factor by minimize harmonic components of each phase.

  • PDF

Three-Level 컨버터의 효율특성에 관한 연구 (Efficiency Characteristic of Three-Level Converter)

  • 배진용;김용;이은영;계상범;엄태민;백수현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.187-193
    • /
    • 2007
  • This paper presents the Efficiency Characteristic of Three-Level Converter. Three-Level DC/DC Converter Presented in this paper is used a phase shift control with a flying capacitor in the primary side to achieve ZVS for the outer switch. This converter reduces the voltage stress across the main switch to half of input voltage. This paper analyses the loss of each component and the various losses for efficiency variation. The result of the analysis are verified using 3kW prototype.

  • PDF