• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.87-95
• /
• 2023

TiO₂ thin films were grown using the Atomic Layer Deposition (ALD) and their structural and electrical properties were investigated. The crystal structure, dielectric constant, and surface roughness of the TiO₂ thin films grown by the ALD deposition method were studied. The grown TiO₂ thin films showed an anatase crystal structure, and their properties varied with temperature. In particular, the properties of the TiO₂ thin films were confirmed by changing the process temperature. The electrical properties of Metal-Insulator-Silicon (MIS) capacitor structures were analyzed using a probe station. The performance improvement of capacitors using TiO₂ as a dielectric was confirmed by measuring capacitance through Capacitance-Voltage (C-V) curves.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.82-85
• /
• 2002

In recent years, the tantalum nitride(TaN) thin-film has been developed for the electronic resistor and capacitor. In this papers, this study presents the surface profile and sheet-resistance property relationship of reactive-sputtered TaN thin film resistor processed by buffer of Ti and Cr on alumina substrate. The TCR properties of the TaN films were discussed in terms of reactive gas ratio, ratio of nitrogen, crystallization and thin films surface morphology due to annealing temperature. It is clear that the TaN thin-films resistor electrical properties are low TCR related with it's buffer layer condition. Ti buffer layer thin film resistor having a good thermal stability and lower TCR properties then Cr buffer expected for the application to the dielectric material of passive component.

• Ceramist
• /
• v.22 no.4
• /
• pp.332-349
• /
• 2019

Ceramic thin films are key materials for fundamental electronic devices such as transistors and capacitors which are highly important for the state-of-the-art electronic products. Their characteristic dielectric properties enable accurate control of current conduction through channel of transistors and stored charges in capacitor electrodes. The electronic conduction in ceramic thin films is one of the most important part to understand the electrical properties of electronic device based on ceramic thin films. There have been numerous papers dealing with the electronic conduction mechanisms in emerging ceramic thin films for future electronic devices, but these studies have been rarely reviewed. Another interesting electrical characterization technique is one based on electrical pulses and following transient responses, which can be used to examine physical and chemical changes in ceramic thin films. In this review, studies on various conduction mechanisms through ceramic thin films and electrical characterization based on electric pulses are comprehensively reviewed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.12
• /
• pp.1115-1121
• /
• 1998

MLS capacitor with lipid ultra thin films were deposited by Langmuir-Blodgett (LB) method on the silicon wafer. The current versus voltage and capacitance versus voltage relationships are depend on the applied voltage, electrode area and electrode materials. LB films deposited were made of L-$\alhpa$-DLPC, the 1 layer’s thickness of 35${\AA}$ was measured by ellipsometer. And MLS capacitor with different electrode materials, the work function of these materials was investigated to increase the leakage current. The result indicated the lower leakage current and very high saturation value of capacitance was reached within 700-800 pF when the two electrode was Ag. And $\varepsilon$1, $\varepsilon$2 versus photon energy showed good film formation.

• Journal of the Korean Ceramic Society
• /
• v.49 no.6
• /
• pp.642-647
• /
• 2012

$TiO_2$ thin films for a pulse power capacitor were deposited by RF magnetron sputtering. The effects of the deposition gas ratio and thickness on the crystallization and electrical properties of the $TiO_2$ films were investigated. The crystal structure of $TiO_2$ films deposited on Si substrates at room temperature changed to the anatase from the rutile phase with an increase in the oxygen partial pressure. Also, the crystallinity of the $TiO_2$ films was enhanced with an increase in the thickness of the films. However, $TiO_2$ films deposited on a PET substrate showed an amorphous structure, unlike those deposited on a Si substrate. An X-ray photoelectron spectroscopy(XPS) analysis revealed the formation of chemically stable $TiO_2$ films. The dielectric constant of the $TiO_2$ films as a function of the frequency was significantly changed with the thickness of the films. The films showed a dielectric constant of 100~110 at 1 kHz. However, the dissipation factors of the films were relatively high. Films with a thickness of about 1000nm showed a breakdown strength that exceeded 1000 kV/cm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.236-236
• /
• 2008

(Bi,La)$Ti_3O_{12}$(BLT) thin film is one of the most attractive materials for ferroelectric random access memory (FRAM) applications due to its some excellent properties such as high fatigue endurance, low processing temperature, and large remanent polarization [1-2]. The authors firstly investigated and reported the damascene process of chemical mechanical polishing (CMP) for BLT thin film capacitor on behalf of plasma etching process for fabrication of FRAM [3]. CMP process could prepare the BLT capacitors with the superior process efficiency to the plasma etching process without the well-known problems such as plasma damages and sloped sidewall, which was enough to apply to the fabrication of FRAM [2]. BLT-CMP characteristics showed the typical oxide-CMP characteristics which were related in both pressure and velocity according to Preston's equation and Hernandez's power law [2-4]. Good surface roughness was also obtained for the densification of multilevel memory structure by CMP process [3]. The well prepared BLT capacitors fabricated by CMP process should have the sufficient ferroelectric properties for FRAM; therefore, in this study the electrical properties of the BLT capacitor fabricated by CMP process were analyzed with the process parameters. Especially, the effects of CMP pressure, which had mainly affected the removal rate of BLT thin films [2], on the electrical properties were investigated. In order to check the influences of the pressure in eMP process on the ferroelectric properties of BLT thin films, the electrical test of the BLT capacitors was performed. The polarization-voltage (P-V) characteristics show a decreased the remanent polarization (Pr) value when CMP process was performed with the high pressure. The shape of the hysteresis loop is close to typical loop of BLT thin films in case of the specimen after CMP process with the pressures of 4.9 kPa; however, the shape of the hysteresis loop is not saturated due to high leakage current caused by structural and/or chemical damages in case of the specimen after CMP process with the pressures of 29.4 kPa. The leakage current density obtained with positive bias is one order lower than that with negative bias in case of 29.4 kPa, which was one or two order higher than in case of 4.9 kPa. The high pressure condition was not suitable for the damascene process of BLT thin films due to the defects in electrical properties although the better efficiency of process. by higher removal rate of BLT thin films was obtained with the high pressure of 29.4 kPa in the previous study [2].

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.9 s.112
• /
• pp.860-865
• /
• 2006

In this paper, a novel tunable inter-digital capacitor using dielectric tunable $Bi_2O_3-ZnO-Nb_2O_5(BZN)$ pyrochlore thin films is proposed. In order to improve the tunability and reduce DC bias voltage using the fringing electric field, the electrodes of the inter-digital capacitor are embedded in the thin film. Designed results using a 2.5 D simulator show that the tunability of the proposed inter-digital capacitor improves by 10 %, compared to the conventional inter-digital capacitor. The proposed IDC, which is based on the simulation results, was fabricated, using the BZN thin film deposited by a reactive RF magnetron sputtering on the on the silicon substrate. The fabricated inter-digital capacitor shows the maximum tunability of 50 % at 5.8 GHz and 18 V DC applied.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.1
• /
• pp.66-74
• /
• 2000

The structural and electrical characteristics of SBT thin films, fabricated on Pt/Ti/SiO\ulcorner/Si substrates by a pulsed laser deposition(PLD), were investigated to develop ferroelectric thin films for capacitor lay-ers of FRAM. EFfects of target composition on the characteristics of SBT thin films were examined. Target were prepared by mixed oxide method, and composition of Sr/Bi/Ta on SBT was changed to 1/2/2, 1/2.4/2, 1/2.8/2, 0.8/2/2 and 1.2/2/2. SBt thin films were fabricated, as a function of substrate temperature and oxygen pressure, by PLD. The optimized ocndition, to fabricate high quality SBT thin films, was 700 $^{\circ}C$ of substrate temperature, 200 mTorr of oxygen pressure, and 2 J/$\textrm{cm}^2$ of laser energy density. Maximum remnant value(2Pr) of 9.0 $\mu$C/$\textrm{cm}^2$, coercive field value(Ec) of 50 kV/cm, dielectric constant value of 166, and leakage current densities of <10\ulcorner A/$\textrm{cm}^2$ were observed for the films with 1/2/2 composition, which was prepared at the above PLD condition.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.87-89
• /
• 2005

$Bi_{3.25}Y_{0.75}Ti_{3}O_{12}$[BYT] ferroelectric thin films were deposited by RF-Sputtering method on the $Pt/Ti/SiO_2/Si$. We investigated the effects of processing condition (especially post-annealing) on the structural and ferroelectric properties of the BYT thin films. Increasing the annealing temperature, the peak intensity of (117) increased and c-axis orientation decreased. The BYT thin films crystallized well at $600^{\circ}C$ for 30min. No secondary phases observed in the XRD pattern. At annealing temperature of $700^{\circ}C$, the thin films had no cracks and the grain was uniform. The calculated lattice constants of BYT thin films were a=0.539nm, b=0.536nm, c=3.288nm. The remnant polarization of the $Bi_{3.25}Y_{0.75}Ti_{3}O_{12}$ capacitor reached $1.8uC/cm^2$ at an applied field about 400kV/cm. The BYT thin films can be used as capacitors in Ferroelectric Random Access Memory device.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.1
• /
• pp.38-42
• /
• 2001

Electric and dielectric(Ba,Sr)$TiO_3$[BST] thin films for emtal-Insulator-Semiconductor(MIS) capacitors have been studied. BST thin films wre deposted on p-Si(100) substrates bythe RF magnetron sputtering with tempratue range of 500~$600^{\circ}C$. The dielectric properties of MIS capacitors consisting of Al/BST/$SiO_2$/Si sandwich structure were evaluated ot redcue the leakage current density. The charge state densities of the MIS capacitors were determined by high frequency (1 MHz) C-V measurement. In order to reduce the leakage current in MIS capacitor, high quality $SiO_2$ layer was deposited on bare p-Si substrate. Depending on the oxygen pressure and substrate temperature both positive and negative polarities of effective oxide charge in the MIS capacitors were evaluated. It is considered that the density of electronic states, generated at the BST/$SiO_2$/p-Si interface due to the asymmetric structure within BST/$SiO_2$/Si structure, and the oxygen vacancy content has influence on the behavior of oxide charge.