• Journal of information and communication convergence engineering
• /
• v.4 no.4
• /
• pp.147-150
• /
• 2006

The thin film of PbTiO3 is fabricated at substrate temperature of 100-150$^{\circ}C$. The infrared spectrum of the ferroelectric thin film is measured as temperature of thermal treatment, 400 - 550$^{\circ}C$. According to infrared spectrum analysis, there are absorption bands at a nearby wave number of 1000 $\sim$ 400 cm-l and the thin film treated by temperature of 550$^{\circ}C$ has absorption bands of wave number 500 cm-l similar to infrared response property of PbTiO3 powder. The pyroelectric infrared detector is fabricated after deposition of Pt and PbTiO3 thin film on Si wafer by sputtering machine. The measured remnant polarization are 11.5-12.5$\muC/cm2$, breakdown electric field Ec is 100-120KV/cm, and voltage responsivity and detectivity is -280V/W, -108cm Hz/W.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.4
• /
• pp.181-184
• /
• 2012

$BaTiO_3$ based multilayer ceramic capacitors with Ni electrodes can be explained as 2-2 composites with different thermal expansion coefficient and sintering behaviors. To achieve the high capacitance and reliability of MLCCs, a homogenous Ni electrode configuration with high connectivity is required. We controlled the heating rates during sintering to achieve densification by suppressing grain growth. Experimental results revealed that a large heating rate gave high connectivity of Ni electrode, high capacitance, small dissipation factor, high breakdown voltage, and high reliability of MLCC chips.

• Journal of Animal Environmental Science
• /
• v.6 no.3
• /
• pp.153-160
• /
• 2000

Odor control for livestock and compost facilities has focused on manure handling and treatment during storage and land application, however, large amount of malodorous air is emitted and it is one of main sources of malodour in livestock farming. Biological treatment or biodegradation involves converting an organic contaminant to carbon dioxide and water using natural bacteria. Biofiltration is an effective air pollution control technology that uses microorganisms to breakdown gaseous contaminants and produce innocuous end products. Investment and operating costs on the biofiltration are lower than for thermal and chemical oxidation processes. This paper is intended to provide an overview of basic design and operating criteria for biofilters to control odors from livestock and compost facilities.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.547-549
• /
• 2004

This system is monitors the degree of aging happened at the electric machine. It detects electromagnetic wave generated from the insulator when the voltage is applied to the machine. By analyzing the internal and external factors make the electric, mechanic, or thermal characteristics of the electric machinery deteriorate the electric insulation and eventually cause the partial electric discharge. The continuous partial electric charge accelerates the insulation aging and the insulation breakdown happens at last. This system consists of the relays connected with 10 sensors (40 total) detecting the partial electric discharge ans the temperature, the server, ans the program analyzing and storing the data.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2132-2133
• /
• 2011

본 논문에서는 차량용 수소 연료전지 냉각수의 절연열화특성을 평가하기 위해 냉각수 시료에 대해 운전온도 보다 가혹한 열 열화 조건을 인가하여 그 특성을 평가하였다. 연료전지 냉각수의 절연열화기구는 냉각수 내 이온성 불순물 증가로 인한 도전율 상승, 유기물 성분의 열열화로 인한 절연저항 및 유전특성 변화 등으로, 이는 연료전지 차량의 절연저항 저하 등의 문제를 야기시킬 수 있다. 본 논문에서는 이온성 불순물에 의한 국부적인 절연특성을 평가 하기 위해 상용 전기전도도미터를 이용한 비전도도 측정 및 열열화로 인한 유기물 성분인 절연성 부동액의 유전특성 변화를 진단하여 열 열화된 냉각수의 전기전도도 및 전기용량 특성을 평가하였다. 또한 각 시료에 대한 내전압 시험을 진행하여 열 열화와 절연파괴 특성의 관계를 확인하였다.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3B
• /
• pp.340-345
• /
• 1999

In this paper, polyimide thin films are fabricated by vapor deposition polymerization method appling to the interlayer insulator of semiconductor device, and are investigated in detail. It is found that the packing density and uniformity of films deposited by thermal evaporation are increased according to curing temperature. The resistivity, breakdown strength, relative permitivity, and dielectric loss are $3.2\tomes10^{15}\Omega$cm, 4.61 MV/cm, 2.9(10kHz) at $25^{\circ}C$, respectively. This thin films can be endured at $230^{\circ}C$ for 20,000 hours. Finally, we conclude that the thin films having the characteristics similar to those of $SiO_2$ can be used as an insulation films between layers of semiconductor device.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1665-1669
• /
• 2014

Four multialkoxy-functionalized siloxane base-polymers (BP-1~4) were synthesized through either hydrosilylation or condensation reactions in order to prepare multi-networked siloxane polymers having appropriate physical properties for protective coating in fabrications of electronics. Formulations of 4 base-polymers gave coating materials A and B. Product A showed well-controlled flowing and leveling properties, and product A-2 was successfully applied to protective insulating coating for junction areas of connectors and chips in PDP controller. Tack free time, extrusion rate, dielectric breakdown voltage, hardness, thermal stability, water resistance and flame resistance of products A and B were examined.

• Journal of the Korean Ceramic Society
• /
• v.31 no.10
• /
• pp.1115-1122
• /
• 1994

ZT/PZT/ZT multi-layered thin films were deposited on silicon substrate by co-sputtering method for FEMFET device application. Effects of Pb/(Zr+Ti) ratio, films thickness, annealing conditions and substrate temperature on the ferroelectric behavior of the multi-layered films were studied. The best memory device characteristics with leakage current of 2$\times$10-8 A/$\textrm{cm}^2$ and breakdown field of about 1 MV/cm could be obtained with ZT(250 $\AA$) / PZT(1000 $\AA$)/ZT(750 $\AA$) multi-layered thin film deposited at 35$0^{\circ}C$ and post-annealed at $700^{\circ}C$ for 120 sec by RTA(Rapid Thermal Annealing).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.2
• /
• pp.47-49
• /
• 2004

Gate protection $SiN_x$ as an alternative to a conventional re-oxidation process in Dynamic Random Access Memory devices is investigated. This process can not only protect the gate electrode tungsten against oxidation, but also save the thermal budget due to the re-oxidation. The protection $SiN_x$ process is applied to the poly-Si gate, and its device performance is measured and compared with the re-oxidation processed poly-Si gate. The results on the gate dielectric integrity show that etch damage-curing capability of protection $SiN_x$ is comparable to the re-oxidation process. In addition, the hot carrier immunity of the $SiN_x$ deposited gate is superior to that of re-oxidation processed gate.

• Textile Coloration and Finishing
• /
• v.15 no.2
• /
• pp.102-108
• /
• 2003

Before studying graft polymerization of PP(polypropylene) nonwoven fabrics by electron beam preirradiation method, mechanical properties, thermal properties and degree of crystallinity of original and electron beam irradiated PP nonwoven fabrics were investigated. Morphological surface changes of electron beam irradiated PP nonwoven fabrics were not observed. And the melting temperature and crystallinity of electron beam irradiated PP nonwoven fabrics also did not change as compared with untreated PP nonwoven fabrics. But the breaking strength of electron beam irradiated PP nonwoven fabrics decreased with increasing electron beam absorbed dose due to breakdown of some parts of polymer main chain.