• Applied Microscopy
• /
• v.39 no.4
• /
• pp.301-309
• /
• 2009

Estrogens induce pronounced structural and functional changes in male and female reproductive system, but the exact mechanisms of estrogen are not fully understood. In relation to estrogen's function, the present study was designed to identify effects of estrogen receptor agonist, 4,4',4"- (4-propyl-[1H]-pyrazole-1,3,5-triyl)tris phenol (PPT) in the reproductive organ of the female mouse. The PPT was subcutaneously given to adult female mice at a weekly dosage of 3 mg in a volume 0.06 mL of vehicle for 3, 5 or 8 weeks whereas controls received weekly injections of the castor oil vehicle. Effects of PPT on reproductive organs were analyzed using a light microscope. PPT induced decreases of body, ovary and adipose tissue weights with experimental time. Ovary diameter of PPT treatment group was reduced as compared with control group. The number of Graffian follicle and corpus luteum was reduced in PPT treatment group. The luminal diameter of uterus was increased in relation with decrease of myometrium and endometrium height by PPT administration. The number of uterine glands was decreased by PPT treatment. These data indicate that PPT treatment induced morphological change of female reproductive organs resulting in alteration of fertility.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.795-801
• /
• 2012

Nanoparticles have received significant attention because of their unusual characteristics including high surface area to volume ratios. Thiol ligand have been used as stabilizers of metal nanoparticles since Brust et al. They reported the preparation method of ligand capped metal nanoparticles by protecting the nanoparticles with a self-assembled monolayer of dodecanethiolate. In this method, volatile organic compounds (VOCs) were used as sovents. This study was carried out to replace these VOCs with room temperature ionic liquids (RTILs). We used two type of ILs to prepare metal nanoparticles. One is a hydrophobic IL, [BMIM][[$PF_6$] (1-Butyl-3-methylimidazolium hexafluorophosphate) purchased from IL maker, C-Tri from Korea and the other one is a hydrophilic one, [BMIM][Cl] (1-Buthy-3-methylimdazolium chloride) sinthesized by us. In the case of preparing Ag and Au nanoparticles using [BMIM][Cl], we didn't use phase transition reagents and ethanol because it has hydrophilic property and preparing Au, Ag nanoparticles using [BMIM][[$PF_6$] the method is as same as Brust et al.'s except using [BMIM][[$PF_6$] instead of organic solvent because it has hydrophobic property. FT-IR and UV-vis, TEM, TGA analysis have been used in an attempt to determine the particle size and verify functional groups. The particle size obtained from TEM was very similar to those obtained by Brust et al. This is a clear example of ligand capped metal nanoparticles prepared using ionic liquids. And the experimental result demonstrated ionic liquids can act as a highly effective medium for the preparation and stabilization of gold and silver metal nanoparticles.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.96-101
• /
• 2017

We have developed a compact desktop-sized nanopatterning system driven by the Roll-to-Roll (R2R) nanoimprinting (NIL) principle. The system realizes the continuous and high-speed stamping of various nanoscale patterns on a large-area flexible substrate without resorting to ponderous and complicated instruments. We first lay out the process principle based on continuous NIL on a UV-curable resin layer using a flexible nanopatterned mold. We then create conceptual and specific designs for the system by focusing on two key processes, imprinting and UV curing, which are performed in a continuous R2R fashion. We build a system with essential components and optimized modules for imprinting, UV curing, and R2R conveying to enable simple but effective nanopatterning within the desktop volume. Finally, we demonstrate several nanopatterning results such as nanolines and nanodots, which are obtained by operating the built desktop R2R NIL system on transparent and flexible substrates. Our system may be further utilized in the scalable fabrication of diverse flexible nanopatterns for many functional applications in optics, photonics, sensors, and energy harvesters.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.671-678
• /
• 2021

Effects of nitric acid treatment of an activated carbon and impregnation of metal chlorides on the activated carbon were investigated to improve ammonia adsorption performance. It was confirmed that functional groups such as hydroxyl and carboxyl groups were introduced onto a surface of the activated carbon with nitric acid treatment. Then, each metal chloride (NiCl₂, MgCl₂, CuCl₂, MnCl₂ or CoCl₂) was impregnated onto the surface-modified activated carbon using an ultrasonic impregnation method. The physicochemical properties and ammonia adsorption performance of various impregnated activated carbons were observed. Metal chlorides were well dispersed by sonication and evenly distributed on the surface of the activated carbon. Despite the reduced specific surface area and pore volume, the surface-modified activated carbon impregnated with metal chlorides exhibited excellent ammonia adsorption performance. In particular, HNO₃-NiCl₂ AC prepared by impregnating NiCl₂ showed the best ammonia adsorption capacity of 3.736 mmol·g^-1, which was improved by about 57 times compared to that of an untreated activated carbon (0.066 mmol·g^-1).

• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.706-712
• /
• 2012

The effects of barnyard millet (Echinochloa spp.) content (10~30%) on wheat flour dough and noodle properties were investigated. As the amount of barnyard millet increased, the particle size and ash content of mixed flour increased, while lightness tended to decrease. The gelatinization characteristics of millet flour showed higher peak viscosity, holding strength, final viscosity, and setback compared with wheat flour. There was significant positive correlation between protein content and sedimentation volume, as well as between protein content and water absorption. As the amount of barnyard millet increased, hardness, springiness and cohesiveness of wet noodles tended to decrease. From the results of sensory evaluation, composite flours (addition up to 20% barnyard millet) were rated with a quality score for taste and overall acceptance which was comparable with the control flour.

• Food Science and Preservation
• /
• v.22 no.4
• /
• pp.475-481
• /
• 2015

The purpose of this study was to investigate the effect of Ligularia fischeri powder on the functional and sensory characteristics of Mandupi. Various Mandupi samples were prepared with wheat flour by addition of different amounts of Ligularia fischeri powder, and instrumental characteristics and sensory evaluations were then investigated. Based on amylograph data, the composite of Ligularia fischeri powder and wheat flour samples increased its gelatinization temperatures depending on increasing of Ligularia fischeri powder content. However, viscosities at $95^{\circ}C$ and after 15 min, and maximum viscosity were reduced. In terms of Hunter's color values, L and a values decreased, while b value increased with the increase of Ligularia fischeri powder content. In addition, weight, volume and turbidity of Mandupis prepared with Ligularia fischeri powder were significantly greater than those of control. In terms of textural characteristics, springiness, chewiness and brittleness increased whereas adhesiveness decreased with the addition of Ligularia fischeri powder. Sensory evaluations showed that the overall preference of Mandupi with the addition of 3% Ligularia fischeri powder was greater than that of wheat flour only.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.407-408
• /
• 2011

Natural boron consists of two stable isotopes 10B and 11B with natural abundance of 18.8 atom percent of 10B and 81.2 atom percent of 11B. The thermal neutron absorption cross-section for 10B and 11B are 3837 barn and 0.005 barn respectively. 10B enriched specific compounds are used for control rods and as a reactor coolant additives. In this work 2 methods for boron enrichment were analysed: 1) Gas irradiation in static conditions. Dissociation occurs due to multiphoton absorption by specific isotopes in appropriately tuned laser field. IR shifted laser pulses are usually used in combination with increasing the laser intensity also improves selectivity up to some degree. In order to prevent recombination of dissociated molecules BCl3 is mixed with H2S 2) SILARC method. Advantages of this method: a) Gas cooling is helpful to split and shrink boron isotopes absorption bands. In order to achieve better selectivity BCl3 gas has to be substantially rarefied (~0.01%-5%) in mixture with carrier gas. b) Laser intensity is lower than in the first method. Some preliminary calculations of dissociation and recombination with carrier gas molecules energetics for both methods will be demonstrated Boron separation in SILARC method can be represented as multistage process: 1) Mixture of BCl3 with carrier gas is putted in reservoir 2) Gas overcooling due to expansion through Laval nozzle 3) IR multiphoton absorption by gas irradiated by specifically tuned laser field with subsequent gradual gas condensation in outlet chamber It is planned to develop software which includes these stages. This software will rely on the following available software based on quantum molecular dynamics in external quantized field: 1) WavePacket: Each particle is treated semiclassicaly based on Wigner transform method 2) Turbomole: It is based on local density methods like density of functional methods (DFT) and its improvement- coupled clusters approach (CC) to take into account quantum correlation. These models will be used to extract information concerning kinetic coefficients, and their dependence on applied external field. Information on radiative corrections to equation of state induced by laser field which take into account possible phase transition (or crossover?) can be also revealed. This mixed phase equation of state with quantum corrections will be further used in hydrodynamical simulations. Moreover results of these hydrodynamical simulations can be compared with results of CFD calculations. The first reasonable question to ask before starting the CFD simulations is whether turbulent effects are significant or not, and how to model turbulence? The questions of laser beam parameters and outlet chamber geometry which are most optimal to make all gas volume irradiated is also discussed. Relationship between enrichment factor and stagnation pressure and temperature based on experimental data is also reported.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.12
• /
• pp.1959-1963
• /
• 2014

The feasibility of incorporating flaxseed powder up to 8% (w/w) as a value-added food ingredient in convenient food products was investigated using pound cake as a model system. The moisture content, volume, height, and hardness of cakes decreased significantly with increasing levels of flaxseed powder (P<0.05). On the other hand, baking loss increased with higher flaxseed powder in the formulation (P<0.05). Lightness and yellowness decreased, whereas redness increased significantly (P<0.05). 1,1-Diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid (ABTS) radical scavenging activities increased significantly (P<0.05), and they were well correlated. The consumer acceptance test indicated that addition of 2% flaxseed powder had the most favorable effect on consumer preferences in general. Based on the overall observation, pound cakes with 2% flaxseed powder is recommended to take advantage of its functional properties without sacrificing consumer acceptability.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.5
• /
• pp.677-683
• /
• 2012

The characteristics and preservation of sulgi added with 0, 1, 3, and 5% onion juice were investigated during storage at $4^{\circ}C$, $18^{\circ}C$, and $30^{\circ}C$. The pH of sulgi added with onion juice was lower than that of sulgi without onion juice and showed higher pH levels at $4^{\circ}C$ than at $18^{\circ}C$ or $30^{\circ}C$. Hardness of sulgi gradually decreased with higher volume of onion juice. Sulgi added with onion juice had higher values of lightness and yellowness than those of the control, whereas redness value was lower. Water activity of sulgi increased upon addition of onion juice. Further, addition of onion juice inhibited growth of aerobic bacteria and mold on sulgi, and the highest suppression of microbial growth was observed at $4^{\circ}C$ compared to other storage temperatures. In the sensory evaluation, color, flavor, after swallowing, and overall quality were all higher in sulgi containing 1% onion juice, but there were no significant differences compared to control sulgi. These results imply that addition of onion juice to sulgi has health and functional benefits and also extends the self-life of sulgi.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4927-4935
• /
• 2012

Turmeric is a medicinal herb with various pharmacological activities. Curcumin, demethoxycurcumin(DMC) and bisdemethoxycurcumin(BDMC) were extracted from turmeric by dipping and ultrasonic wave method. And extraction efficiency was identified using solid phase extraction(SPE). The extracted sample were simultaneously separated and analyzed from three kinds of commercial $C_{18}$ reversed-phase high performance liquid chromatography using water and acetonitrile as mobile phase with isocratic elution mode. Flow rate 1.0mL/min, injection volume $10{\mu}L$ and column oven temperature $40^{\circ}C$ at 425nm wavelength has been conducted. From the experimental results, the optimum mobile phase composition of water/acetonitrile 50/50vol% using RS tech column. It is evident that the amount of curcuminoids extracted(extraction time 4h) by 100% MeOH was higher than any aqueous MeOH composition. Finally, in 100% water extraction, the amount(mAU${\times}$mim) of curcuminoids extracted by SPE was 14.3 and 24.5 times respectively higher than ultrasonic wave and dipping method. The shown results can be applied as sources for pharmaceuticals and functional material.