• Resources Recycling
• /
• v.30 no.6
• /
• pp.12-18
• /
• 2021

The water-gas shift reaction is the subsequent step using steam for hydrogen enrichment and H₂/CO ratio-controlled syngas from gasification. In this study, a water-gas shift reaction was performed using syngas from an RPF gasification system. The water-gas shift using a catalyst was performed in a laboratory-scale tube reactor with a high temperature shift (HTS) and a low temperature shift (LTS). The effects of the reaction temperature, steam/carbon ratio, and flow rate on H₂ production and CO conversion were investigated. The operating temperature was 250-400℃ for the HTS system and 190-220℃ for the LTS system. Steam/carbon ratios were between 1.5 and 3.5, and the composition of reactant was CO : 40 vol%, H₂ : 25 vol%, and CO₂ : 25 vol%. The CO conversion and H₂ production increased as the reaction temperature and steam/carbon ratio increased. The CO conversion and H₂ production decreased as the flow rate increased due to reduced retention time in the catalyst bed.

• Quality Improvement in Health Care
• /
• v.1 no.2
• /
• pp.44-59
• /
• 1994

Medical consumers(patients) want evening-clinic because of busy work. For patient's convenience and improving service, hospital should accept it. Considering payment system and patient's demand, personnel expenses, hospital can not accept. The practice of shift system to accept patient's demand and hospital's economic aspect was made. To analysis the effect of the system and probability to alternative to evening clinic this study was done. This study was composed of basal study, intervention, evaluation of effect. The basal study were composed of studying demand on evening clinic, the number of beds, doctors employee, the time table of practice and work, and the number of patients at arrival time. The intervention composed of changing of practice time, changing of working time by the number of patients at arrival time, increasing of employee. The evaluation of effect were composed of evaluating the number of patient at time, the effect of shift system, the comparison of the number of in and out patients and questionnairing the practice of shift system. In the practice time at 2 shift system First team works 7-15 hours and Second team 12-20 hours. there are no lunch and supper time. At 18-20 hours the number of patients were 25-30. The number of patient a depart were 6-7. The number of out-patient increase in 13% and inpatient increase in 10% before the system. Doctors(100%), employee(94.6%), and patients(86.4%) approved this system. The advantage of this system were utilization of surplus time, lengthen the practice time, even distribution of patients and shortening of waiting time, rapid treatment of emergent patients. The disadvantage of this system were shortage of manpower, not all depart practice, continuity of practice, no lunch and supper time, irregular rounding. At present because of small Demanding on evening clinic, this shift system was economical. To succeed this study more effectively all depart in hospital participate. But because of economical reason it is impossible for hospital to do it. If the government assist the economic loss that all depart participate in this system it is very helpful for hospital to succeed in implementing this system more early.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.239-242
• /
• 2003

Transmit diversity using STBC(Space Time Block Code) provides the same diversity gain as MRRC(Maximal Ratio Receiver Combining), when the fading channel is constant across two consecutive symbols. But, when the channel condition is changed for the two consecutive symbols, the transmit diversity using STBC does not offer good performance due to the large doppler shift. In this paper, we have proposed a interference cancellation scheme for performance enhancement in transmit diversity using STBC over time selective fading channel. Simulation results for various doppler shift rates are presented for the transmit diversity using the proposed scheme.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.3
• /
• pp.154-159
• /
• 2015

In this paper, we propose a numerical method to model temperature dependent threshold voltage shift observed in metal oxide thin-film transistors (TFTs). The proposed model is then implemented in AIM-SPICE circuit simulation tool. The proposed method consists of modeling the well-known stretched-exponential time dependent threshold voltage shift and their temperature dependent coefficients. The outputs from AIM-SPICE tool and the stretched-exponential model at different temperatures in the literature are compared and they show a good agreement. Since metal oxide TFTs are the promising candidate for flat panel displays, the proposed method will be a good stepping stone to help enhance reliability of fast-evolving display circuits.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.4 no.2
• /
• pp.7-20
• /
• 2007

TCU is a shift controller far automatic transmission of which major functions are to determine the shift point and manage the shifting process based on the various input signals. As the recent digital control technologies advance, it plays a key-role to improve a transmission performance and its algorithm becomes more complicated. This paper describes the development of transmission simulator fur wheel loader that enables a TCU for normal stand-alone operation by the real-time emulation of TCU interface signals. It can be utilized for the analysis of shift control algorithm implemented in a commercial TCU as well as for the development of brand new TCU.

• Journal of applied mathematics & informatics
• /
• v.27 no.1_2
• /
• pp.441-452
• /
• 2009

In this paper, a fifth order numerical method is presented for solving singularly perturbed differential-difference equations with negative shift. In recent papers the term negative shift has been using for delay. Similar boundary value problems are associated with expected first exit time problem of the membrane, potential in models for neuron and in variational problems in control theory. In the numerical treatment for such type of boundary value problems, first we use Taylor approximation to tackle terms containing small shifts which converts it to a boundary value problem for singularly perturbed differential equation. The two point boundary value problem is transformed into general first order ordinary differential equation system. A discrete approximation of a fifth order compact difference scheme is presented for the first order system and is solved using the boundary conditions. Several numerical examples are solved and compared with exact solution. It is observed that present method approximates the exact solution very well.

• Journal of Korea Multimedia Society
• /
• v.18 no.5
• /
• pp.610-619
• /
• 2015

*In this paper, we propose a real-time face tracking system using an adaptive face detector and a tracking algorithm. An image is divided into the regions of background and face candidate by a real-time updated skin color identifying system in order to accurately detect facial features. The facial characteristics are extracted using the five types of simple Haar-like features. The extracted features are reinterpreted by Principal Component Analysis (PCA), and the interpreted principal components are processed by Support Vector Machine (SVM) that classifies into facial and non-facial areas. The movement of the face is traced by Kalman filter and Mean shift, which use the static information of the detected faces and the differences between previous and current frames. The proposed system identifies the initial skin color and updates it through a real-time color detecting system. A similar background color can be removed by updating the skin color. Also, the performance increases up to 20% when the background color is reduced in comparison to extracting features from the entire region. The increased detection rate and speed are acquired by the usage of Kalman filter and Mean shift.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.5
• /
• pp.21-28
• /
• 2017

As technology related to digital imaging equipment is developed and generalized, digital imaging system is used for various purposes in fields of society. The object tracking technology from digital image data in real time is one of the core technologies required in various fields such as security system and robot system. Among the existing object tracking technologies, cam shift technology is a technique of tracking an object using color information of an object. Recently, digital image data using infrared camera functions are widely used due to various demands of digital image equipment. However, the existing cam shift method can not track objects in image data without color information. Our proposed tracking algorithm tracks the object by analyzing the color if valid color information exists in the digital image data, otherwise it generates the lightness feature information and tracks the object through it. The brightness feature information is generated from the ratio information of the width and the height of the area divided by the brightness. Experimental results shows that our tracking algorithm can track objects in real time not only in general image data including color information but also in image data captured by an infrared camera.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.2
• /
• pp.84-93
• /
• 1996

Non-destructive inspection techniques using laser have been broading their application areas as well as growing their measurement skills together with the rapid development of circumferential technology like fiber optics, computer and image processing. The ESPI technique is already on the stage of on-line testing with commercial products in developed country nations. Especially, this technique is expected to be applied to the nuclear industry, automobile and aerospace because it is proper for the vibration measurement and it can be applied to objects of a high temperature. This paper describes the use of the ESPI system for measuring vibration patterns on the reflecting objects. Using this system, high-quality Jo fringes for identifying mode shapes are displayed. A bias vibration is introduced into the reference beam to shift the Jo fringes so that fringe shift algorithms can be used to determine vibration amplitude. Using this method, amplitude fields for vibrating objects were obtained directly from the time-average interferograms recorded by the ESPI system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.729-732
• /
• 2014

본 논문에서는 실시간 영상에서 움직임 검출 및 추적에 관련한 기본 기술들을 나열하고 구현하여 구현 가능성 및 성능에 대하여 검증을 진행하였다. 움직임 검출에는 배경 차영상 기법에 의한 움직임 및 변화 영역 검출 방법과 움직임 히스토리에 의한 움직임 검출법, 광류에 의한 움직임 검출법이 있으며 이를 구현하여 검증하였다. 또한 움직임 추적의 경우에는 추적하려는 물체의 히스토그램의 역투영을 이용하면서 물체의 중심점을 추적하는 MeanShift와 물체의 중심, 크기, 방향을 함께 추적하는 CamShift가 있고 Kalman 필터에 의한 움직임 추적을 구현하여 검증하였다. 구현된 방법을 통하여 보안용의 영상감시 장비의 추적 시스템 및 GPS 좌표를 기반으로하여 비행체를 추적하면서 통신링크를 유지하는 추적안테나 시스템에 적용하므로서 제어의 정확도를 높일 수 있다.