• 디자인학연구
• /
• 제19권4호
• /
• pp.31-40
• /
• 2006

오랜 동안 우리는 한국의 이미지를 연상할 때'고요한 아침의나라'라는 정적인 이미지에 익숙해 왔다. 하지만 88서울올림픽과 2002 한 일 월드컵의 성공적인 개최로 국제사회에 비추어진 우리의 모습은 매우 역동적이었으며 우리나라를 새롭게 인식시키는 계기가 되었다. 그리고 이로 인해 한국을 찾는 외국인들로부터 한국에 대한 관심과 기대가 향상되고 있다. 또 최근 아시아 지역에 한류열풍이 불어 닥치면서 우리나라 문화산업의 중요성과 새로운 문화 개발에 대한 인식이 변화하고 있다. 따라서 본 연구는 시대 변화에 따른 한국의 정체성을 제고하고, 역동적인 코리아 이미지의 상징성을 환경시설물 디자인에 적용함으로서, 한국의 상징성을 표현하고 특성 있는 거리로 새롭게 인식될 수 있는 가로를 조성하여 이용자들로 하여금 국가의 상징성을 인식시키고자한다. 그리고 한국의 조형요소를 바탕으로 실제적인 디자인 사례를 제시함으로서 코리아 이미지를 이용한 환경시설물 디자인이 단지 환경시설물로서의 쓰임새가 아닌, 한국 정체성의 의미언어로서 새로운 역할을 하고, 특성화된 국가문화와 국가이미지 향상을 도모하는데 그 목적이 있다. 코리아 이미지를 이용한 환경시설물 디자인 개발 연구의 방법으로는 한국의 국가이미지 변화에 관한 선행 연구 자료를 바탕으로 한국의 대외적 국가이미지 특성을 분석한다. 그리고 한국의 변화된 국가이미지의 상징성을 파악하고 디자인 요소를 추출한다. 추출된 한국의 국가이미지와 한국의 전통적 조형요소를 접목한 환경시설물의 형태, 재질, 색채 이미지를 유추한다. 유추된 이미지를 바탕으로 디자인 개발 프로세스에 따라 환경시설물에 적용하여 국가이미지의 상징적 이미지를 형상화한다. 코리아 이미지를 이용한 형상화 연구는 한국의 정체성을 명확하게 하며, 도시환경을 구성하는 물리적인 요소에 의한 사용자의 행태적인 변화뿐만 아니라 한국의 문화적 가치향상에도 많은 영향을 주리라 본다.

• 한국정보과학회논문지:시스템및이론
• /
• 제28권9호
• /
• pp.415-423
• /
• 2001

최근에는 회화과 같은 미술 작품들을 디지털 형태로 재현하려는 시도들이 활발해지고 있다. 디지털 형태로 재현된 회화 작품들은 저장하거나 전송하기에 편리한 장점을 가진다. 반면에 알렉산터 칼더(Alexander Calder)가 창시한 모빌, 즉 움직이는 조각은 그 특성상 기존의 방법으로는 컴퓨터에서 재현하기가 까다롭다. 모빌은 바람과 같은 외부의 힘에 의해 각각의 조각이 움직이도록 제작되어 있으므로, 사진이나, 정지 영상과 같은 고정된 형태로는 작가의 제작 의도를 충분히 전달하기에 미흡하다. 본 논문에서는 컴퓨터상에서 재현된 모빌을 사용자들이 사실적으로 감상할 수 있는 물리 기반의 가상 모빌 시스템을 제안한다. 실세계의 모빌을 3차원 모델로 구성한 후, 가상의 바람을 생성하여 그 모빌이 움직일 수 있도록 하였다. 모빌의 움직임을 운동학 방법들을 사용하여 사실적으로 표현한다. 기존의 제약조건을 가지는 동역학(Donstraint dynamics)방법과 충격역학(impulse dynamics)방법들을 모빌의 구조에 적합하도록 개선하여, 모빌의 움직임을 PC 환경에서 대화형으로 재현하였다. 본 논문에서는 제안하는 속도 향상 방법들을 모빌과 유사한 위상 구조를 가지는 3차원 모델에서도 적용 될 수 있다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권1호
• /
• pp.67-72
• /
• 2020

The fifth generation (5G) mobile communication has an impact on the human life over the whole world, nowadays, through the artificial intelligence (AI) and the internet of things (IoT). The low latency of the 5G new radio (NR) access is implemented by the state-of-the art technologies, such as non-orthogonal multiple access (NOMA). This paper investigates a practical issue that in NOMA, for the practical channel models, such as fading channel environments, the successive interference cancellation (SIC) should be performed on the stronger channel users with low power allocation. Only if the SIC is performed on the user with the stronger channel gain, NOMA performs better than orthogonal multiple access (OMA). Otherwise, NOMA performs worse than OMA. Such the superiority requirement can be easily implemented for the channel being static or slow varying, compared to the block interval time. However, most mobile channels experience fading. And symbol by symbol channel estimations and in turn each symbol time, selections of the SIC-performing user look infeasible in the practical environments. Then practically the block of symbols uses the single channel estimation, which is obtained by the training sequence at the head of the block. In this case, not all the symbol times the SIC is performed on the stronger channel user. Sometimes, we do perform the SIC on the weaker channel user; such cases, NOMA performs worse than OMA. Thus, we can say that by what percent NOMA is better than OMA. This paper calculates analytically the percentage by which NOMA performs better than OMA in the practical mobile communication systems. We show analytically that the percentage for NOMA being better than OMA is only the function of the ratio of the stronger channel gain variance to weaker. In result, not always, but almost time, NOMA could perform better than OMA.

• 복식
• /
• 제37권
• /
• pp.231-252
• /
• 1998

Since the costume directly express human mental and emotional status, colors of costume can be valuable data to grasp the spirit of the times. Black is noticeably used in modern fashion and the study for black costume is very useful to understand modern fashion. There-fore the study mainly approaches the black costume, finding its background of appearance and symbolism, reviews the symbolism and formality of black expressed in the field of paint-ing and design beyond the fashion, and compar-es to fashion. The study result of the thesis is as follows ; First, black as a color is a one to light other neighboring colors, while it is a static, con-tractible and outstandigly attractived color. Second, black color traditionally symbolizes death, earth, air, North and inferior level and in the painting, it symbolized death, despair, fantastic world and the expression of pent-up self, while cities have been symbolized in the black printing in modern times. In the design, black has appeared with the industrial society, which symbolizes functionality and modernity. Third, black in the fashion design was symbolized death, sternness simplicity, modernity, sex, resistance and so on. Death became conspicious by a religious factor since the old times, sternness was influenced by Spanish fashion in the 16th century, simplicity by Dutch fashion in the 17th century and modernity by Baudelaire dandyism and Chanel little black dress, while sex and resistance were urged to the modern times by teenage inferior culture and stickiness to sex. Fourth, the formative features of black costume prefer simplicity, tightness and bareness in form, and in material, usually used glancing materials changed by the effect of light, lace, see-through fabric and matte one with depth. As a result, the black color is summarized to symbol death, expression of self and modernity. It is not a color of emotion but of mentality and artificial one against nature. Black color in fashion gets a strong power to express self in the symbolic aspect and draws a higher attention on human body than the fashion itself. By these features, black costume will be continuously prefered in spite of changes of the fashion.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.1-12
• /
• 2015

The current scenario of the transportation sector reflects the urgent need to address issues such as depletion of traditional fuel reserves and ever growing pollution levels. Researchers around the world are focussing on alternatives as well as optimisation of currently employed devices to reduce the pollution levels generated by the commonly used fuels. One such optimisation involves the study of air flow within the intake manifolds of SI engines. It is a well-known fact that alterations in the air manifolds of engines have a significant impact on the engine performance parameters, fuel consumption and emission levels. Previous works have demonstrated the impacts of runner lengths, diameter, plenum volume, taper angle of distribution manifolds and other factors on in-cylinder fluid motion and engine performance. However, a static setup provides an optimal configuration only at a specific engine speed. This paper aims to investigate the variations in the same parameters on a four stroke, naturally aspirated single cylinder SI engine through varying the cross section design over the intake runner with the aid of Computational Fluid Dynamics. The system consists of segments that form the intake runner with projections on the inside that allow various permutations of the intake runner segments. The various configurations provide the optimised fluid flow characteristics within the intake manifold at specific engine speed intervals. The variations such as turbulence, air fuel mixing are analysed using the three dimensional CFD software FLUENT. The results can be used further for developing an automated or manually adjustable intake manifold.

• Smart Structures and Systems
• /
• 제17권6호
• /
• pp.1107-1127
• /
• 2016

Studies on dynamic characteristics of the hanger vibration using field monitoring data are important for the design and evaluation of high-speed railway truss arch bridges. This paper presents an analysis of the hanger's dynamic displacement responses based on field monitoring of Dashengguan Yangtze River Bridge, which is a high-speed railway truss arch bridge with the longest span throughout the world. The three vibration parameters, i.e., dynamic displacement amplitude, dynamic load factor and vibration amplitude, are selected to investigate the hanger's vibration characteristics in each railway load case including the probability statistical characteristics and coupled vibration characteristics. The influences of carriageway and carriage number on the hanger's vibration characteristics are further investigated. The results indicate that: (1) All the eight railway load cases can be successfully identified according to the relationship of responses from strain sensors and accelerometers in the structural health monitoring system. (2) The hanger's three vibration parameters in each load case in the longitudinal and transverse directions have obvious probabilistic characteristics. However, they fall into different distribution functions. (3) There is good correlation between the hanger's longitudinal/transverse dynamic displacement and the main girder's transverse dynamic displacement in each load case, and their relationships are shown in the hysteresis curves. (4) Influences of the carriageway and carriage number on the hanger's three parameters are different in both longitudinal and transverse directions; while the influence on any of the three parameters presents an obvious statistical trend. The present paper lays a good foundation for the further analysis of train-induced hanger vibration and control.

• KIEE International Transactions on Power Engineering
• /
• 제5A권1호
• /
• pp.85-92
• /
• 2005

In this paper, Nash equilibriums of generation markets are investigated using a game theory application for simplified competitive electricity markets. We analyze the characteristics of equilibrium states in N-company spot markets modeled by uniform pricing auctions and propose a new method for obtaining Nash equilibriums of the auction. We assume that spot markets are operated as uniform pricing auctions and that each generation company submits its bids into the auction in the form of a seal-bid. Depending on the bids of generation companies, market demands are allocated to each company accordingly. The uniform pricing auction in this analysis can be formulated as a non-cooperative and static game in which generation companies correspond to players of the game. The coefficient of the bidding function of company-n is the strategy of player-n (company-n) and the payoff of player-n is defined as its profit from the uniform price auction. The solution of this game can be obtained using the concept of the non-cooperative equilibrium originating from the Nash idea. Based on the so called residual demand curve, we can derive the best response function of each generation company in the uniform pricing auction with N companies, analytically. Finally, we present an efficient means to obtain all the possible equilibrium set pairs and to examine their feasibilities as Nash equilibriums. A simple numerical example with three generation companies is demonstrated to illustrate the basic idea of the proposed methodology. From this, we can see the applicability of the proposed method to the real-world problem, even though further future analysis is required.

• 한국안전학회지
• /
• 제31권2호
• /
• pp.70-75
• /
• 2016

Recently, coastal erosion has been widely in progress and the erosion level becomes also serious in the world wide, espeically in East Sea in Korea. Since it would threaten the life, economics and security risk, it is necessary to much comprehend the reason why coastal erosion has occurred according to the geographical characteristics. Meanwhile, analysis about hydrodynamics of the solitary wave such as tunami in swash zone is needed for the best management practice of coastal erosion. Solitary wave is nonlinear wave and can be reproduced in the laboratoy scale by openning suddenly a sluice gate with water head difference, of which methodology was found in the literature, since it could be simply determined by a significant wave height. Thus, in this sutdy the generation of solitary wave was experimentalized using the sluice gate. Experimental conditions were classified by angles of a beach slope, a water level in a beach slope and a difference of water level between in a headtank and a channel bed. Two kinds of dimensionless analyses based from experimental results in this study were presented; the first analysis indicates nondimensionalization between the wave height and the water level in a beach slope in order to investigate characteristics of solitary wave approaching the beach. The second shows the other nondimensionalization between dynamic pressure and static pressure on a beach slope to investigate the relationship between wave breaking and wave pressure. Under the same conditions as laboratory experiments, the numerical results computed with a SWAN model embedded in FLOW 3D were compared in terms of wave height, and pressure on the beach slope, which shows good agreement with each other. Overall results from this study could provide fundamental hydraulic data for the reliabile verification of numerical simulation results about coastal erosion in swash zone caused by solitary waves.

• 산업경영시스템학회지
• /
• 제41권3호
• /
• pp.108-114
• /
• 2018

One of the most performed action in daily life is standing up from sitting position. As the population of the world is aging at the high rates, people may face problems with reduced muscle strength as well as psychological changes. This can lead elderly people having difficulties with standing up from chair. Now, with the aging trend worldwide, products are being developed that can support the lives of the elderly. This study examines the distribution of hip pressure in relation to the seating positions of the standing assistance seats under development to prevent standing up accidents in older adults. The currently developing standing assistant chair designed to tilt to a maximum angle of 25 degrees. At over $25^{\circ}$, design considers that older people are at risk of thrown back out of that force and that the forces exerted on their arms and legs can be a significant burden to older people. By considering danger of higher than $25^{\circ}$ for older people which is experimented in the basis of static capturing approach in previous papers, it is experimented people with age group of 20~60 on $0^{\circ}$ to $25^{\circ}$ tilting angle on the basis of dynamic capturing method in order to pick convenient angle of inclination. Moreover, tried to find the optimum angle by comparing the hip pressure distribution when seated at the edge of the seat and at the center of the seat with the pressure distribution sensor.

• Structural Engineering and Mechanics
• /
• 제14권3호
• /
• pp.331-343
• /
• 2002

Because of the increasing span of arch bridges, ultimate capacity analysis recently becomes more focused both on design and construction. This paper investigates the static and ultimate behavior of a long-span steel arch bridge up to failure and evaluates the overall safety of the bridge. The example bridge is a long-span steel arch bridge with a 550 m-long central span under construction in Shanghai, China. This will be the longest central span of any arch bridge in the world. Ultimate behavior of the example bridge is investigated using three methods. Comparisons of the accuracy and reliability of the three methods are given. The effects of material nonlinearity of individual bridge element and distribution pattern of live load and initial lateral deflection of main arch ribs as well as yield stresses of material and changes of temperature on the ultimate load-carrying capacity of the bridge have been studied. The results show that the distribution pattern of live load and yield stresses of material have important effects on bridge behavior. The critical load analyses based on the linear buckling method and geometrically nonlinear buckling method considerably overestimate the load-carrying capacity of the bridge. The ultimate load-carrying capacity analysis and overall safety evaluation of a long-span steel arch bridge should be based on the geometrically and materially nonlinear buckling method. Finally, the in-plane failure mechanism of long-span steel arch bridges is explained by tracing the spread of plastic zones.