• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.221-226
• /
• 2001

HANARO, 30MW of research reactor, was installed at the depth of 13m of open pool, The $90\%$ of primary coolant was designed to pass through the core and to remove the reaction heat of the core. The rest $10\%$, of the primary coolant was designed to bypass the core. And the reactor coolant through and bypass the core was inhaled at the top of chimney by the coolant pump to protect that the radiated gas was lifted to the top of reactor pool. But, the part of core bypass coolant was not inhaled by the reactor coolant pump and reached at the top of reactor pool by natural convection and increased the radiation level on the top of reactor pool. To reduce the radiation level by protecting the natural convection of the core bypass flow, the hot water layer (HWL, hereinafter) was installed with the depth of 1.2m from the top of reactor pool. As the HWL was normally operated, the radiation level was reduced to five percent ($5\%$) in comparing with that before the installation of the HWL. When HANARO was operated with higher temperature than the normal temperature of the HWL by operating the standby heater, it was found that the radiation level was more reduced than that before operation. To verify the reason, the heat loss of the HWL was calculated. It was confirmed through the results that the larger the temperature difference between the HWL and reactor hall was, the more the evaporation loss was increased. And it was verified that the radiation level above was reduced more safely by increasing the capacity of heater.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.41-45
• /
• 2018

We have simulated the process induced warpage for panel level package using finite element method. Silicon chips of $5{\times}5mm^2$ were redistributed on $122.4{\times}93.6mm^2$ size panel and the total number of redistributed chips was 221. The warpage at each process step, for example, (1) EMC molding, (2) attachment of detach core, (3) heating, (4) removal of a carrier, and (5) cooling was simulated using ANSYS and the effects of detach core and carrier materials on the warpage were investigated. The warpage behaved complexly depending on the materials for the detach core and carrier. However, glass carrier showed the lower warpage than FR4 carrier regardless of detach core material, and the minimum warpage was observed when the glass was used for the detach core and carrier at the same time.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3217-3220
• /
• 2010

The electronic structures and bonding configuration of histidine on Ge(100) have been investigated with various sample treatments using core-level photoemission spectroscopy (CLPES). Interpretation of the Ge 3d, C 1s, N 1s, and O 1s core level spectra being included in these systems revealed that both the imino nitrogen in the imidazole ring and the carboxyl group in the glycine moiety concurrently participate in the adsorption of histidine on a Ge(100) surface at 380 K. Moreover, we could clearly confirm that the imino nitrogen with a free lone pair in the imidazole group adsorbs on Ge(100) more strongly than the carboxyl group in the glycine moiety by examining systems annealed at various temperatures.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.1
• /
• pp.17-24
• /
• 2013

In this paper, we present a multi-core processor including multimedia specific instructions to process multimedia data efficiently in the mobile environment. Multimedia specific instructions exploit subword level parallelism (SLP), while the multi-core processor exploits data level parallelism (DLP). These combined parallelisms improve the performance of multimedia processing applications. The proposed multi-core processor including multimedia specific instructions is implemented and tested using a Xilinx ISE 10.1 tool and SoCMaster3 testbed system including Vertex 4 FPGA. Experimental results using a fire detection algorithm show that multimedia specific instructions outperform baseline instructions in the same multi-core architecture in terms of performance (1.2x better), energy efficiency (1.37x better), and area efficiency (1.23x better).

• Steel and Composite Structures
• /
• v.39 no.3
• /
• pp.229-241
• /
• 2021

This work focused on aluminum foam sandwich (AFS) with different foam core densities and different face-sheet thicknesses subjected to constant amplitude three-point bending cyclic loading to study its fatigue performance. The experiments were conducted out by a high frequency fatigue test machine named GPS-100. The experimental results showed that the fatigue life of AFS decreased with the increasing loading level and the structure was sensitive to cyclic loading, especially when the loading level was under 20%. S-N curves of nine groups of AFS specimens were obtained and the fatigue life of AFS followed three-parameter lognormal distribution well. AFS under low cyclic loading showed pronounced cyclic hardening and the static strength after fatigue test increased. For the same loading level, effects of foam core density and face-sheet thickness on the fatigue life of AFS structure were trade-off and for the same loading value, the fatigue life of AFS increased with aluminum foam core density or face-sheet thickness monotonously. Core shear was the main failure mode in the present study.

• The Journal of Information Systems
• /
• v.15 no.4
• /
• pp.1-22
• /
• 2006

Nowadays, IS projects are getting more complicated and large-scaled. Therefore, many researchers and practitioners have been interested in the IS development methodologies, automated tools, techniques, and TQM to improve IS performance. Latest Standish Group's research reported that after the PMO introduction, project scale became bulkier than 1 or 2 year ago, and that IS development project success probability was increased sharply by 62 percents from 37. The previous researches listed just various PMO functions. This research is to seize the core functions and management level of the PMO affecting on the IS project performance with banks which are the leading industry to accept the PMO in Korea. The activities in the categories of implementation management technology support management infrastructure management are the core functions of the PMO to affect the IS performance including schedule management quality management user and stakeholders' satisfaction. Also, the PMO management level is important for IS project success. Among the 5 levels PMI suggested, PMO can implement the project effectively at least at the third level. Korean companies which are about to introduce the PMO have to consider the PMO core functions and management level to increase the IS maturity.

• The Journal of Korean Physical Therapy
• /
• v.26 no.5
• /
• pp.351-357
• /
• 2014

Purpose: The purpose of this study was to investigate level of functioning in patients with stroke using Modified Bathel Index (MBI), World Health Organization Disability Assessment Schedule 2.0 (WHODAS 2.0), and ICF core-set for stroke. Methods: Sixty-four patients with stroke were recruited for this study from nine medical institutes. The ICF core-set for stroke, WHODAS 2.0, and MBI were used to collect subjects' functional levels. ICF core-set was employed here as a standard frame to observe multi-dimension of functioning, that is physiological bodily function, activity and participation (AP) in daily life, and current environmental factors (EF) in patients with stroke. WHODAS 2.0 and MBI were also used in order to have a specific functioning level for subjects. The linkage of each item in WHODAS 2.0 and MBI into the ICF core-set for stroke was examined. Pearson correlation coefficient was used for analysis of their relationships. Results: Functioning level of participants showed moderate resulting from MBI and WHODAS 2.0 ($73.48{\pm}22.27$ and $35.55{\pm}12.53$, respectively). Strong relationship was observed between ICF core-set and WHODAS 2.0, and with MBI. Each item of disability scales was obtained its linkage into ICF in the domain of AP. However, lack of correlation between MBI and ICF in the domain of EF was found due to absence of related factors. Conclusion: MBI was found to be linked mainly into ICF in the domain of AP and to have limited linkage into EF. Therefore, it should be suggested that the ICF concept frame should be used as a multi-dimensional approach to patients with stroke.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.133-136
• /
• 2005

Compressive strength of recycled aggregate concrete was tested by the core and by the non-destructive testing. A prediction model of compressive strength considering the replacement level of recycled aggregate was suggested by multi-regression analysis and was compared with test results. Also, Test results showed that the ratio of compressive strength by core and non-destructive testing to actual was somewhat affected by the replacement level of recycled aggregate.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.325-328
• /
• 2002

In this paper, we present a SystemC model of a 32-Bit RISC core wi)ich is based on the ARMTTDMI architecture. The RISC core model was first modeled in C for architecture verification and then refined down to a level that allows concurrent behavior lot hardware timing using the SystcmC class library. It was driven in timed functional level that uses handshake protocol. It was compiled using standard C++ compiler. The functional simulation result was verified by comparing the contents of memory, the result of execution with the result from the ARMulator of ADS(Arm Developer Suite).

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.2
• /
• pp.281-292
• /
• 2017

It is demanded to promote research and development of cyber weapons system and core technology in response to the ongoing cyber attack of North Korea. In this paper, core technologies of the future cyber weapon system are developed and the factors affecting the realization timing of core technologies were analyzed. 9 core technology groups and 36 core technologies are derived. Afterwards, these core technology groups are compared to the operation phase of the joint cyber warfare guideline and the cyber kill chain of Lockheed Martin. As a result of the comparison, it is confirmed that the core technology groups cover all phases of the aforementioned tactics. The results of regression analyses performed on the degree of influence by each factor regarding the moment of core technology realization show that the moment of core technology realization approaches more quickly as factors such as technology level of the most advanced country, technology level of South Korea, technology transfer possibility from the military sector to the non-military sector(spin-off factor), and technology transfer possibility from the non-military sector to the military sector(spin-on factor) increase. On the contrary, the moment of core technology realization is delayed as the degree at which the advanced countries keep their core technologies from transferring decrease. The results also confirm that the moment of core technology realization is not significantly correlated to the economic ripple effect factor. This study is meaningful in that it extract core technologies of cyber weapon system in accordance with revision of force development directive and join cyber warfare guideline, which incorporated cyber weapon system into formal weapon system. Furthermore, the study is significant because it indicates the influential factor of the moment of core technology realization.