• Journal of Korea Water Resources Association
• /
• v.35 no.4 s.129
• /
• pp.411-423
• /
• 2002

Accurate and real time forecasting of runoff has a high priority in the drainage basins prone to short, high intensity rainfall events causing flash floods. To take into account the resolution of hydrological variables within a drainage basin, use of distributed system models is preferred. The Landsat Thematic Mapper(TM) observations enable detailed information on distribution of land cover and other related factors within a drainage basin and permit the use of distributed system models. This paper describes monitoring technique of rainfall excess by SCS curve number method. The time series maps of rainfall excess were generated for all the storm events to show the spatiotemporal distribution of rainfall excess within study basin. A combination of the time series maps of rainfall excess with a flow routing technique would simulate the flow hydrograph at the drainage basin outlet.

• Journal of the korean society of oceanography
• /
• v.38 no.3
• /
• pp.87-100
• /
• 2003

The monthly observations of hydrography in the Cheju Strait from September 1995 to June 1998 show that the Cheju Strait is occupied mostly by Tsushima Current Water in winter and coastal waters in summer. In summer, the Yangtze Coastal Water appears in the upper layer and cold water in the lower layer. Especially, the Yellow Sea Bottom Cold Water appears in August 1997, and the clockwise flow of warm water along the northwestern coasts of Cheju Island is disturbed by an eastward expansion of the cold water from the northwest. The cold water expansion seems to be partly associated with strong southeasterly winds. Current measurements in the Cheju Strait suggest that there exists steady eastward barotropic component of about 5 cm/sec, which corresponds to 0.2 Sv barotropic transport in the Cheju Strait. Geostropic transport (baroclinic component) ranges from 0.1 Sv in winter to 0.4 Sv in summer. By adding the barotrophic component of 0.2 Sv, the total transport varies from 0.3 Sv to 0.6 Sv, which is consistent with previous estimations. The transport increase in summer seems to be caused by the expansion of coastal water to the Cheju Strait.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.477-485
• /
• 2012

Fluid flow and heat transfer in horizontal ducts are strongly coupled with large changes in thermodynamic and transport properties near the critical region as well as the gravity force. Numerical analysis has been carried out to investigate convective heat transfer in horizontal rectangular ducts for water near the thermodynamic critical point. Convective heat transfer characteristics, including velocity, temperature, and the properties as well as local heat transfer coefficients along the ducts are compared with the effect of proximity on the critical point. When there is flow acceleration because of a density decrease, convective heat transfer characteristics in the ducts show transition behavior between liquid-like and gas-like phases. There is a large variation in the local heat transfer coefficient distributions at the top, side, and bottom surfaces, and close to the pseudocritical temperature, a peak in the heat transfer coefficient distribution resulting from improved turbulent transport is observed. The Nusselt number distribution depends on pressure and duct aspect ratio, while the Nusselt number peak rapidly increases as the pressure approaches the critical pressure. The predicted Nusselt number is also compared with other heat transfer correlations.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.7
• /
• pp.617-624
• /
• 2015

The dissolved air flotation (DAF) system is a water treatment process that removes contaminants by attaching micro bubbles to them, causing them to float to the water surface. In the present study, two-phase flow of air-water mixture is simulated to investigate changes in the internal flow analysis of DAF systems caused by using different turbulence models. Internal micro bubble distribution, velocity, and computation time are compared between several turbulence models for a given DAF geometry and condition. As a result, it is observed that the standard ${\kappa}-{\varepsilon}$ model, which has been frequently used in previous research, predicts somewhat different behavior than other turbulence models.

• Korean Journal of Ichthyology
• /
• v.34 no.1
• /
• pp.34-43
• /
• 2022

A distribution survey was conducted from March to August 2021 to evaluate the distribution status, habitat characteristics, and threat of extinction of the Korean cold-water fish Ladislabia taczanowskii Dybowski (Cypriniformes, Cyprinidae). Historical distribution reports were divided into 1997~2005, 2006~2012, 2013~2019, and distribution surveyed 169 sampling sites, and 1,040 individuals were collected from 72 sites. Areas where the habitat was confirmed were Namhan River (27 stations), Han River (17 stations), Bukhan River (16 stations), Samcheok Osipcheon (4 stations), Yeongokcheon (3 stations), Gangneung Namdaecheon (2 stations), Jeoncheon (1 station), Chucheon (2 stations). The main habitat of L. taczanowskii was upstream of the river with a high altitude of more than 300 m, 2~30 m water flow width, 0.3~1.5 m water depth, and high ratio (50~90%) boulder bottoms. The main reasons for the decline in population size were assumed as river works, construction of reservoirs and bridges, discharge of contaminated water into the river, the inflow of summer vacationers, and weir. Compared to our results there exists evidence that states a 36.1% reduction in occupancy within 10 years, in a small appearance range (7,820 km²) and occupancy area (288 km²), number of disconnected locations (19 locations), and a decline in habitat quality. Therefore, L. taczanowskii is now considered as Vulnerable (VU) based on the results (VU A2ac, Near meets B1b (i, ii, iii)+B2b (i, ii, iii)) of IUCN Red List categories and criteria. Lastly, the conservation plan of Ladislabia taczanowskii was discussed.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.246-252
• /
• 2000

The water quality in Yeongil Bay is getting worse due to the sewage and the waste water from the surrounding industrial complex The study aims to simulate the current system that is necessary to built ecosystem model for the optium water quality control and clarify the correlation of current system characteristics with water quality in Yongil Bay. To clarify the characteristics of coastal water movement system and verify the applicability of the 3-D model, the current system was simulated using 3-D baroclinic model considered tidal current and density effects. As the results of numerical experiments, it is proved the 3-D model is the most appliable on the Yongil Bay where current flows slowly and the flow direction is varied by depths. From the results of simulation considered tidal current only, It am be clearly said the water in Yongil Bay flows in through the surface layer and flows out through the bottom layer. And the fresh water from the Hyongsan river and the heated discharge from POSCO have little effect on the current structure in Yonggil Bay, but have and important effect upon the density structure by diffusion of heat and salt. And the water quality distribution is closely related with the current structure characteristics as well as the tidal residual current system.

• Journal of Korea Water Resources Association
• /
• v.34 no.4
• /
• pp.391-401
• /
• 2001

Several curvature parameters, solar radiation parameter and topographic flow generation parameters have been summarized and calculated to predict the spatial distribution of soil moisture content. The spatial distribution of soil moisture data can be obtained using Global Positioning System(GPS) and portable soil moisture monitoring equipment, Theta-Probe. Correlation analysis has been performed between the parameters of soil moisture prediction and measured data of soil moisture. Multiple regression analysis of soil moisture prediction shows the potential capability and limitations of existing methods of digital terrain analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.675-680
• /
• 2017

Considering that most sewage treatment facilities have a water head of less than 2.0 m and a constant flow rate, the development of a small hydro power generation device capable of maintaining stable power generation and efficiency is urgently needed. In this study, a numerical analysis using the CFD code was carried out to develop a drag force type vertical axis hydro turbine for the improvement of the production efficiency of small-scale hydro energy underlow flow velocity conditions. The blade pressure changes and internal flows were analyzed in the presence or absence of hydro turbine blade holes at a flow velocity of less than 2.0 m/s. The pressure distribution of the hydro turbine blades with holes was found to be about 5.1 % lower than that of the hydro turbine blades without holes. The analysis of the internal flow around the water tank and hydro turbine blade revealed that the flow velocity varied with the vector distribution and that the flow velocity of the hydro turbine blades with holes was 5.6 % less than that of the hydro turbine blades without holes. It is believed that forming a hole in the blade may be helpful for its structural safety.

• The KSFM Journal of Fluid Machinery
• /
• v.5 no.4 s.17
• /
• pp.19-25
• /
• 2002

The flow characteristics in a bifurcated duct are investigated experimentally. Physical properties such as mean velocity vectors, mean vorticity, and total pressure distributions are obtained for three different Reynolds numbers (578, 620, 688) using PIV measurements and CFD analysis. Also, two different dividing ducts ($90^{\circ},\;60^{\circ}$) were selected for study. The results of this study would be useful to the engineers designing flow systems for heating, ventilation, air conditioning and waste-water purification plants.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.673-680
• /
• 2017

sump pump is a system that draws in water that is stored in a dam or reservoir. They are used to pump large amounts of water for cooling systems in large power plants, such as thermal and nuclear plants. However, if the flow and sump pump ratio are small, the flow rate increases around the inlet port. This causes a turbulent vortex or swirl flows. The turbulent flow reduces the performance and can cause failure. Various methods have been devised to solve the problem, but a correct solution has not been found for low water level. The most efficient solution is to install an anti-vortex device (AVD) or increase the length of the sump inlet, which makes the flow uniform. This paper presents a computational fluid dynamics (CFD) analysis of the flow characteristics in a sump pump for different sump inlet lengths and AVD types. Modeling was performed in three stages based on the pump intake, sump, and pump. For accurate analysis, the grid was made denser in the intake part, and the grid for the sump pump and AVD were also dense. 1.2-1.5 million grid elements were generated using ANSYS ICEM-CFD 14.5 with a mixture of tetra and prism elements. The analysis was done using the SST turbulence model of ANSYS CFX14.5, a commercial CFD program. The conditions were as follows: H.W.L 6.0 m, L.W.L 3.5, Qmax 4.000 kg/s, Qavg 3.500 kg/s Qmin 2.500 kg/s. The results of analysis by the vertex angle and velocity distribution are as follows. A sump pump with an Ext E-type AVD was accepted at a high water level. However, further studies are needed for a low water level using the Ext E-type AVD as a base.