• 제목/요약/키워드: the Rf values

검색결과 373건 처리시간 0.021초

Effects of Biofertilizer on the Quality and Antioxidant Property of Rice (Oryza sativa L.)

  • Rico, Cyren Mendoza;Bhuiyan, Mohammad Kamrul Islam;Mintah, Lemuel O.;Shin, Dong-Il;Chung, Il-Kyung;Son, Tae-Kwon;Lee, Sang-Chul
    • 한국작물학회지
    • /
    • 제52권3호
    • /
    • pp.274-280
    • /
    • 2007
  • The effect of biofertilizer in enhancing nutrient quality and antioxidant property of rice grain was investigated. The experiment was carried out in a randomized complete block design with 3 replications and 7 treatments namely : RF = $N-P_2O_5-K_2O(11-5.5-4.8kg\;10a^{-1});$ half of the recommended fertilizer rate, $HRF=N-P_2O_5-K_2O(5.5-2.75-2.4kg\;10a^{-1}):$ HRF+Bio 250=HRF combined with 250 kg Biofertilizer 10 $a^{-1}$; HRF+Bio 500=HRF combined with 500 kg Biofertilizer 10 $a^{-1};$ Bio 250=250 kg Biofertilizer 10 $a^{-1};$ Bio 500=500 kg Biofertilizer 10 $a^{-1};$ and NF=No Fertilizer. Results showed that HRF+Bio 500 obtained a significantly higher protein content but a significantly lower amylose content compared with RF and NF treatments. Highest phytic acid content was recorded in NF treatment while the lowest was observed in HRF+500 treatment. The highest values in both electron donating ability and reducing power were obtained in HRF+Bio 500 treatment. All treatments obtained higher reducing power than that of the RF treatment and that NF treatment showed comparable values in both electron donating ability and reducing power with those of the treated plots. Highest antimutagenicity property was also observed in HRF+Bio 500 treatment followed by Bio 500 treatment. This study showed the possibility of using biofertilizer to enhance nutritional quality and antioxidant property of rice.

ESPAR 안테나를 사용하는 카오스 QPSK 빔 공간 MIMO 시스템을 위한 리액턴스 조합과 성능 평가 (Reactance Set and Performance Evaluation of Chaos QPSK Beamspace MIMO System Using ESPAR Antenna)

  • 이준현;이동형;금홍식;유흥균
    • 한국전자파학회논문지
    • /
    • 제25권7호
    • /
    • pp.737-746
    • /
    • 2014
  • 대용량, 초고속 통신으로 인해 MIMO 시스템에 대한 연구가 활발하게 진행 중이다. 하지만 MIMO 시스템은 다수의 배열 안테나를 사용하기 때문에 다수의 RF 체인이 존재한다. 이로 인해 복잡도와 전력 소모가 증가하고, 안테나의 소형화가 불가능하다는 단점을 가진다. 이런 단점을 극복하기 위해 ESPAR 안테나를 사용하는 Beamspace MIMO 기술이 제안되었다. ESPAR 안테나를 사용하는 빔 공간 MIMO 시스템은 단일 능동 소자와 다수의 기생 소자로 구성되어 있기 때문에, 단일 RF 체인으로 구성되어 있기 때문에 복잡도와 전력 소모를 감소시킬 수 있다. 본 논문에서는 ESPAR 안테나를 사용하는 QPSK 변조 방식의 빔 공간 MIMO 시스템에 보안성 향상을 위해 최초로 카오스 통신 알고리즘을 적용시킨다. 이 시스템을 카오스 빔 공간 MIMO 시스템이라고 정의하고, 통신 성능을 평가한다. 또한, ESPAR 안테나는 기생 소자의 리액턴스를 조절하여 리액턴스 셋을 생성함으로써 QPSK 심볼을 만들고, 이를 이용한 통신 성능을 평가한다.

랜덤포레스트의 크기 결정에 유용한 승리표차에 기반한 불일치 측도 (A measure of discrepancy based on margin of victory useful for the determination of random forest size)

  • 박철용
    • Journal of the Korean Data and Information Science Society
    • /
    • 제28권3호
    • /
    • pp.515-524
    • /
    • 2017
  • 이 연구에서는 분류를 위한 RF (random forest)의 크기 결정에 유용한 승리표차 MV (margin of victory)에 기반한 불일치 측도를 제안하고자 한다. 여기서 MV는 현재의 RF에서 1등과 2등을 차지하는 집단이 무한 RF에서 차지하는 승리표차이다. 구체적으로 -MV가 양수이면 현재와 무한 RF 사이에 1등과 2등인 집단에서 불일치가 생긴다는 점에 착안하여, max(-MV, 0)을 하나의 불일치 측도로 제안한다. 이 불일치 측도에 근거하여 RF의 크기 결정에 적절한 진단통계량을 제안하며, 또한 이 통계량의 이론적인 점근분포를 유도한다. 마지막으로 이 통계량을 최근에 제안된 진단통계량들과 소표본 하에서 성능을 비교하는 모의실험을 실행한다.

RF Magnetron Sputtering으로 증착된 ZnO의 증착 특성과 이를 이용한 Thin Film Transistor특성 (Thin Film Transistor Characteristics with ZnO Channel Grown by RF Magnetron Sputtering)

  • 김영웅;최덕균
    • 마이크로전자및패키징학회지
    • /
    • 제14권3호
    • /
    • pp.15-20
    • /
    • 2007
  • 플라스틱 기판에 적용이 가능한 최대 공정온도 $270^{\circ}C$ 이하에서 ZnO-TFT 소자를 제작하였다. ZnO-TFT 소자는 bottom gate 구조로 제작되었으며, ICP-CVD로 형성된 $SiO_2$ 산화물 게이트 공정을 제외하고는 모든 박막증착 공정은 RF-magnetron sputtering process를 이용하였다. ZnO 박막은 Ar과 $O_2$ gas 유량의 비율에 따라 여러 가지 조건에서 RF-magnetron sputtering 시스템을 이용하여 상온에서 증착하였다. Ar과 $O_2$ gas의 비율에 따라 제작된 TFT 소자는 모두 enhancement 모드의 소자특성을 나타내었고, 또한 가시광선영역에 있어 80% 이상의 높은 투과율을 보였다. ZnO 증착시 순수 Ar을 사용하여 제작된 ZnO-TFT의 경우에, $1.2\;cm^2/Vs$의 field effect mobility, 8.5 V의 threshold voltage, 그리고 $5{\times}10^5$의 높은 on/off ratio, 1.86 V/decade의 swing voltage로 가장 우수한 전기적 특성을 보였다.

  • PDF

이탈리안 라이그라스의 품종별 Alcohol Dehydrogenase ( ADH ) 와 Esterase의 Isozyme Banding Pattern에 관한 (Studies on the Alcohol Dehydrogenase ( ADH ) and Esterase Isozyme banding Pattern of Italian Ryegrass Varieties)

  • 이성규;박병훈
    • 한국초지조사료학회지
    • /
    • 제14권2호
    • /
    • pp.82-87
    • /
    • 1994
  • 이탈리안 라이그라스 37개 품종을 대상으로 ADH와 Esterase 의 Isozyme을 Starch gel 전기영동법을 이용하여 분리한 후 염색하여 품종간 band 의 차이점을 비교하였다. 1. ADH isozyme은 Rf 0.60과 0.63 두 개의 band zone으로 나타났으며 Rf0.60이 main band이었다. 2. ADH isozyme의 banding pattern은 5개의 type으로 구별이 되었는데 type I은 7개품종, type II는 2개 품종, type III는 6개 품종, type IV은 18개 품종, type V는 4개 품종이었다. 3. Esterase isozyme은 Rf 1.00으로 한 개의 band만 나타났다. 4. Esterase isozyme의 banding pattern은 3개 type으로 구별되었는데 type I은 22품종, type II는 8품종, type III는 7개 품종이었다. 5. ADH와 Esterase isozyme의 banding pattern 으로 본 이탈리안 라이그라스의 품종별 차이는 없으나 염색 강도에 따라 일부 품종의 변이를 구분할 수 있었다.

  • PDF

RF 집적회로를 위한 0.18 μm CMOS 표준 디지털 공정 기반 인덕터 라이브러리 (Indictor Library for RF Integrated Circuits in Standard Digital 0.18 μm CMOS Technology)

  • 정위신;김승수;박용국;원광호;신현철
    • 한국전자파학회논문지
    • /
    • 제18권5호
    • /
    • pp.530-538
    • /
    • 2007
  • 본 논문에서는 표준 디지털 0.18 ${\mu}m$ CMOS 공정을 기반으로 하는 RF 집적회로 설계를 위해 인덕터 라이브러리를 개발하였다. 개발된 인덕터 라이브러리에는 일반적인 표준(standard) 구조의 인덕터를 비롯하여, PGS(Patterned Ground Shield)를 적용하여 Q 지수를 향상시킨 인덕터, 금속선의 직렬 저항을 줄임으로써 Q 지수를 향상시킨 다층금속선(multilayer) 인덕터, 같은 면적에서 높은 인덕턴스 구현에 유리한 적층형(stacked) 인덕터 등을 포함한다. 본 논문에서는 각 인덕터 구조에 대하여 측정 결과와 3차원 전자기파 시뮬레이션 결과를 바탕으로 한 특성 해석 및 비교 분석을 하였고, 각 구조에 대한 등가회로 모델 확립 및 추출 과정도 연구하였다. 본 연구의 결과를 바탕으로 여러 설계 요구 사항을 만족시키는 최적의 인덕터 설계가 가능해졌으며 표준 CMOS 공정을 이용하는 저가의 RF 집적회로 개발이 가능해진다.

LC공진기의 MSL길이에 따른 VCO 발진 특성 (VCO Oscillation Characteristics by Varying the Length of the MSL of LC Resonator)

  • 이동희;정진휘
    • 한국전기전자재료학회논문지
    • /
    • 제15권5호
    • /
    • pp.412-418
    • /
    • 2002
  • In this paper, the authors present the simulation results and the experimental considerations on the effects of the effects of the VCO oscillation characteristics caused by varying the length of the MSL and the composition capacitance of LC resonation circuity. Simulation was accomplished by nonlinear RF circuit simulator for designing and analyzing the RF characteristis of VCO. The samples with 3 different MSL lengths of which the length is 140mil, 280mil and 560mil respectively were fabricated by screen printing process. The oscillation frequency of each sample(VCO) was tuned to UHF band (750MHz~900MHz) by varying the capacitance of LC resonator circuit. The experimental results showed that the values of phase noise were -82, -93, -97[dBc/Hz] at 50[kHz] offset frequency, the pushing figures were 114, 94, 318[kHz] at applied voltage of $3\pm0.15$[V] and the harmonics were -21, -16, -13[dBc] for MSL lengths of 140mil 280mil, 560mil respectively. The frequency and output variation width were 779~898[MHz], -36~-33[dBm] for MSL with 140mil length; 818~836[MHz], -27.19~27.06[dBm] for 280mil; 751.54~751.198[MHz], -33.44~-33.31[dBm] for 560mil.

Characterization of RF Sputter-deposited Sodium Phosphorous Oxynitride Thin Films as a Solid-state Sodium-ion Conductor

  • Chun, Sang-Eun
    • 한국표면공학회지
    • /
    • 제50권4호
    • /
    • pp.237-243
    • /
    • 2017
  • We demonstrated the thin film deposition of sodium phosphorous oxynitride (NaPON) via RF magnetron sputtering of $Na_3PO_4$, as a solid-state Na-ion conductor similar to lithium phosphorous oxynitride (LiPON), which is a commonly used solid electrolyte. The deposited NaPON thin film was characterized by scanning electron microscopy, X-ray diffractometry, and electrochemical impedance spectroscopy, to investigate the feasibility of the solid-state electrolyte in several different cell configurations. The key properties of a solidstate electrolyte, i.e., ionic conductivity and activation energy, were estimated from the complex non-linear least square fitting of the measured impedance spectra at various temperatures in the range of $27-90^{\circ}C$. The ionic conductivity of the NaPON film was measured to be $8.73{\times}10^{-6}S\;cm^{-1}$ at $27^{\circ}C$, which was comparable to that of the LiPON film. The activation energy was estimated to be 0.164 eV, which was lower than that of the LiPON film (0.672 eV). The obtained values encourage the use of a NaPON thin film in the future as a reasonable solid-state electrolyte.

기계학습을 이용한 지진 취약성 평가 및 매핑: 9.12 경주지진을 대상으로 (Seismic Vulnerability Assessment and Mapping for 9.12 Gyeongju Earthquake Based on Machine Learning)

  • 한지혜;김진수
    • 대한원격탐사학회지
    • /
    • 제36권6_1호
    • /
    • pp.1367-1377
    • /
    • 2020
  • 본 연구는 2016년 발생한 9.12 경주지진을 중심으로 경주시 건축물의 지진 취약성을 평가하고 지도를 제작하는데 목적이 있다. 지진 취약성을 평가하기위해 지질공학, 물리, 구조적 요인과 관련된 11개의 영향인자를 선정하였으며, 이는 독립변수로 적용되었다. 종속변수로는 9.12 경주지진 당시 실제 피해 입은 건축물의 위치자료가 사용되었다. 평가 모델은 기계학습 방법의 RF와 SVM을 기반으로 구축하였으며, 훈련 및 검증 데이터셋은 70:30 비율로 무작위 선별되었다. 정확도 검증은 ROC 곡선을 사용하여 최적 모델을 선별하였으며, 각 모델의 정확도는 RF(1.000), SVM(0.998), 예측 정확도는 RF(0.947), SVM(0.926) 로 나타났다. RF 모델을 기반으로 경주시 전체 건축물의 예측 값을 도출하였으며, 이를 등급화 하여 지진 취약성 지도를 작성하였다. 행정동별 건물 등급 분포를 살펴본 결과, 황남동, 월성동, 선도동, 내남면이 취약성이 높은 지역으로, 양북면, 강동면, 양남면, 감포읍이 상대적으로 안전한 지역으로 나타났다.

RF magnetron reactive sputtering 법으로 제작한 BST 박막의 전기적 및 계면 특성에 관한 연구 (Electrical and interface characteristics of BST thin films grown by RF magnetron reactive sputtering)

  • 강성준;장동훈;유영섭
    • 전자공학회논문지D
    • /
    • 제35D권5호
    • /
    • pp.33-39
    • /
    • 1998
  • The BST (Ba$_{1-x}$ Sr$_{x}$TiO$_{3}$)(50/50) thin film has been grown by RF magnetron reactive sputtering and its characteristics such as crystallization, surface roughness, and electrical properties have been investigated with varying the film thickness. The crystallization and surface roughness of BST thin film are investigated by using XRD and AFM, respectively The BST thin film anealed at 800.deg. C for 2 min has pure perovskite structure and good surface roughness of 16.1.angs.. We estimate that the thickness and dielectric constant of interface layer between BST film and electrode are 3nm and 18.9, respectively, by measuring the capacitance with various film thickness. As the film thickness increases form 80nm to 240nm, the dielectric constant at 10kHz increases from 199 to 265 and the leakage current density at 200kV/cm decreases from 0.682.mu.A/cm$^{2}$ to 0.181 .mu.A/cm$^{2}$. In the case of 240nm-thick BST thin film, the charge storage density and leakage current density at 5V are 50.5fC/.mu.m$^{2}$ and 0.182.mu.A/cm$^{2}$, respectively. The values indicate that the BST thin film is a very useful dielectric material for the DRAM capacitor.or.

  • PDF