• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.413-418
• /
• 2000

The noise sources from a rotating cylinder were identified to describe the blunt trailing edge noise. Firstly, LES formulation was applied to a non-orthogonal grid system and was tested with three-dimensional cross-flow over a cylinder with a yaw angle. The computed far-field noise showed peaks at Strouhal numbers ranging from 0.135 to 0.165 for the yawed cylinder flow with end-plates placed at both extremes under the yaw angle of $30^{\circ}$ and Reynolds number of $1.15{\times}10^4$. It was observed that the slantwise shedding at angles other than the cylinder yaw angle is intrinsic to inclined cylinder, with the result of shedding angles between $15^{\circ}$ and $31^{\circ}$. To study the trailing-edge wake thickness and unsteady lift-coefficient distribution in the span-wise direction of a rotating fan blade, the flows around rotating cylinder with 1,000 rpm were simulated and the far-field noise was exactly computed using the Ffowcs-Williams and Hawkings equation with quadrupole source term. The incoming velocities and stagnant zones were continuously distributed along the cylinder, and their changes made the Strouhal sheddings to occur at different phases even at almost same Strouhal number.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.2
• /
• pp.153-159
• /
• 2010

This work focuses on finding a method to reduce the noise of a hermetic reciprocating compressor during start-up using an acoustical analysis. The noise of compressor during start-up, which is a higher level than that of a normal operating condition, has transient and non-stationary characteristics. The acoustical analysis of compressor cavity is performed to find an effective method to reduce the noise level. In the acoustical analysis, the shape variations of frequency response function in the neighborhood of resonances are tested for three parameters: the height of remained oil, the suction position of refrigerant and the position of driving part. As a conclusion of this result, to reduce the emission noise of compressor during start-up, the height of remained oil should be kept at 16 mm, the refrigerant should be sucked at the cross point of nodal lines of X and Y directional cavity modes, and the driving part should be positioned in the center of cavity.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.5
• /
• pp.578-583
• /
• 2016

In order to provide a basis data for design of small arms and their silencer, an experimental study on firing noise of small arms was performed around the muzzle of a gun. For this experimental comparison analysis, the target small arms were included most operating small arms in our country. The sound pressure levels were measured at a certain distance which was predetermined according to US army firing test procedure, TOP 3-2-045. By this experimental study, the sound pressure levels of 5.56 mm caliber small arms are 143 dB ~ 145.4 dB and 7.62 mm caliber small arms are 144 dB ~ 145.2 dB. Between the heavy machine gun K12 and M60, the sound pressure level of K12 is slightly lower than M60.Also silencer for K14 snifer rifle was tested. Using this result, it has been found that the reduction effect of the silencer is 15.4 dB but the improvements of silencer performance in the high frequency range have to be studied later on.

• Korean Journal of Veterinary Service
• /
• v.21 no.3
• /
• pp.301-311
• /
• 1998

This study was carried out species identification and antibiotics susceptibility of Staphylococci Isolated from bovine mastitic milk, chicks, Korean indigenous goats, pigs and mice in northern area of Kyungbuk. The result were summarized as follows ; A total of 71 Staphylococci were Isolated from bovine mastitic milk, chicken, pig, Korean indigenous goat and mouse. The results of identification of 71 Staphylococci revealed that S. aureus was most important pathogen in animals tested. Of 39 Staphylococci from bovine mastitic milk, 16 of 39 isolates (41%) were S. aureus and 9 of 39 isolates (23% ) were S. hyicus subsp chromogens. The results of susceptibility test to 16 antibiotics revealed that 91.5% of all isolates were resistant to more than 1 antibiotic and resistance to penicillin was most high (76.1%), All Isolates were susceptible to vancomycin.

• Korean Journal of Veterinary Service
• /
• v.17 no.3
• /
• pp.167-173
• /
• 1994

This study were performed to distribution of dermatophytes isolated from pet dogs in Pusan area and pathogenicity of the isolates. During the period from March 1993. to April 1994, 201 pet dogs of house breeding were examined. The result of obtained were summarized as followes； 1. Isolation rate of dermatophytes were 4.7%(7/149) in no lesion and 23.1%(12/52) in lesion of dog's skin. 2. According to breeding conditions, isolation rate of dermatophytes were 1) 3.8% in no lesion and indoor breeding, 2) 16.7% in lesion and indoor breeding, 3) 13.5% no lesion and outdoor breeding, and 4) 37.5% in lesion and outdoor bleeding. 3. Among the 201 Pet dogs, 16 strains of M. cams(84.2%), 1 of M. gypseum(5.3%), and 2 of T. mentagrophytes (10.5%) were isolated. 4. For Pathogenicity test, one strain of each M. canis, M, gypseum, T. mentagrophytes isolated from skin lesions were inoculated to the skin of the posterior back of guinea pigs. All of dermatophytes tested were induced skin lesions. Among them, M. cams and T. mentagrophytes were more virulent than M. gypseum.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.328-331
• /
• 2008

It is possible to extract qualified ground control points (GCPs) solely from SAR data without published maps. TerraSAR-X is now in orbit and provides valuable data that have one of the highest spatial resolutions among civilian SAR systems. In this study, a sophisticated method for GCP coordinate extraction from TerraSAR-X stripmap mode data with a 3 m resolution was tested and the quality of the extracted GCPs was evaluated. An inverse-geolocation algorithm was applied to obtain GCPs from TerraSAR-X data. SRTM 90m DEM was used as an auxiliary data set for azimuth time correction of the SAR data. Mean values of the distance errors were 0.11 m and -3.96 m with standard deviations of 6.52 m and 5.11 m in easting and northing, respectively. The result is one of the best among GCPs possibly extracted from current civilian remote sensing systems. The extracted GCPs were used for geo-rectification of an IKONOS image, which demonstrated the applicability of the GCPs to geo-rectification of high resolution optic image. The method used in this study can be applied to KOMPSAT-5 for geo-rectification of high-resolution optic images acquired by KOMPSAT-2 or follow-up missions.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.1
• /
• pp.9-16
• /
• 2011

The purpose of this study is to analyze the effects of both various shoe types and bare feet on ground reaction force while walking. Ten first-year female university students were selected. A force platform(Kistler, Germany) was used to measure ground reaction force. Six types of shoe were tested: flip flops, canvas shoes, running shoes, elevated forefoot walking shoes, elevated midfoot walking shoes, and five-toed shoes. The control group was barefooted. Only vertical passive/active ground reaction force variables were analyzed. The statistical analysis was carried out using the SAS 9.1.2 package, specifically ANOVA, and Tukey for the post hoc. The five-toed shoe had the highest maximum passive force value; while the running shoe had the lowest. The first active loading rate for running shoes was the highest; meanwhile, bare feet, the five-toed shoe, and the elevated fore foot walking shoe was the lowest. Although barefoot movement or movement in five toed shoes increases impact, it also allows for full movement of the foot. This in turn allows the foot arch to work properly, fully flexing along three arches(transverse, lateral, medial), facilitating braking force and initiating forward movement as the tendons, ligaments, and muscles of the arch flex back into shape. In contrast movement in padded shoes have a tendency to pound their feet into the ground. This pounding action can result in greater foot instability, which would account for the higher loading rates for the first active peak for padded shoes.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.3 s.32
• /
• pp.457-465
• /
• 1997

The Shape optimization makes it possible to reduce the weight of structure and cost then member sizing optimization. A vast amount of imprecise information is existed in constraints of the optimum design. It is very difficult and sometimes confusing to describe and to deal with the several criteria which contain fuzzy degrees of relatives importance. This paper proposed weighting strategies in the multiobjective shape optimization of fuzzy structural system by ${\alpha}$-cut approach. The algorithm in this research is numerically tested for 2-bar truss structure. The result show that. the user can choose the one optimum solution in practices as obtaining the optimum solutions according to the ${\alpha}$-cut approach, weight of volume and displacement.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.3
• /
• pp.299-310
• /
• 2015

CFT(Concrete-Filled Tube) structures have problems at processing cause closed section and concrete filling problems. In this study, a CFT structure that uses different types of diaphragms in its upper and lower connections to improve the concrete filling was tested and analyzed via the FEM program. Implementation of variable analysis of EP-T type to find out the reason that effect on the resistance force of the connection. As a result, through experiments and analysis investigated the structural characteristics of circular CFT beam-to-column connection.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.149-157
• /
• 2008

In this paper, a POI(Point-of-Interest) telematics service platform, in which detailed POI telematics services are discovered automatically and provided, is developed. The platform discovers services with UPnP middleware and provides a location-based service using GIS information. It is implemented by a telematics server, terminals, and service gateways and tested by applying test scenario for validation. Also, the response time and throughput of UPnP messages in the platform is measured and analyzed. The result shows that it has little impact on the service network congestion.