• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.308-315
• /
• 2013

Water emulsion technology has the problem of unstable combustion due to the rapid separation of water. To solve the problem, a hybrid mixing device was developed. The device attached on the burner was tested. As a result, the fuel consumption reduced to 12% in the similar condition of exhaust emissions and flame temperature, and 45.5%, 98.5% and 97.2% of NOx, CO, and smoke were reduced at the same inlet air and fuel flow rate.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.29-32
• /
• 2004

In this study, we had modelled Siemens type MLC using BEAM Monte Carlo code and tested the feasibility of the modelling. To model the Primus linac MLC, we had measured the actual dimensions of MLC and each leaves, then approximated the leaf shape. VARMLC component module was used for the modelling and leakage, tongue-and-groove effect were also considered. Simulation result showed the good agreement with the film measurement.

• The Plant Pathology Journal
• /
• v.22 no.4
• /
• pp.318-322
• /
• 2006

One hundred and nine Agrobacterium isolates were recovered from 68 samples(51 plant tumor and 17 soil) that were collected from different habitats in Northern Jordan. The isolated cultures were grouped into 3 biovars based on their biochemical characteristics and biovar I, II, and III comprised a total number of 46, 41, and 22 isolates, respectively. Isolates of biovar I were obtained primarily from the diseased peach, oak and rose plants, whereas isolates of biovar II and ill were obtained mostly from apple and grape plants, respectively. Twenty-nine isolates were found to be virulent to at least one of the tested hosts such as carrots, chickpeas, garden peas and tomato plants with a response of tumor formation or tumor with roots induction. Our result suggested that A. tumefaciens strains from tumor of various plants and soil of Jordan were diverse and they have a variation in their virulence.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.200.2-200.2
• /
• 2011

This study was carried out in order to estimate the greenhouse performance for Ground filtration water source heat pump which was installed for supplying the heat to the paprika greenhouse in Jinju city. Experimental area of Greenhouse was $3,300m^2$, For keeping the heat from greenhouse, single plastic covering and double thermal screen was installed. With considering all of greenhouse insulation condition and designed heatng temperature, heating capacity for experimental greenhouse was calculated as 320,000kcal/hr. Coefficient of performance(COP) of Ground filtration water source heat pump was gauged and greenhouse heating performance was tested from Febuary 1 to Febuary 28 in 2011. The result showed that COP of heat pump was in the range of 3.7~4.7 and COP of heating system was in the range of 3.0~3.5. The vaule of COP was very high and the temperature inside greenhouse was well corresponded to the setting temperature of greenhouse environment controlling system. lots of Ground filtration water made the the number of well fewer and the expense for installing heating system cheaper than that of geothermal system used custmarily. and this system went beyond the limitation of intaking amount of groundwater in normal Groundwater source heat pump.

• Journal of Mechanical Science and Technology
• /
• v.17 no.11
• /
• pp.1767-1774
• /
• 2003

The objective of this paper is to present the performance comparison of the impulse turbines for different diameters. In the study, the investigation has been performed experimentally by model testing for some diameters, especially 0.3 m and 0.6 m. The experiment was performed for Reynolds number range of 0.17 ${\times}$ 10$\^$5/ -1.09 ${\times}$ 10$\^$5/ and for different values of hub-to-tip ratio ν ranging from 0.6 to 0.85. As a result, it was found that the critical Reynolds number is to be around 0.5 ${\times}$ 10$\^$5/ for ν=0.6 and 0.4 ${\times}$ 10$\^$5/ for ν=0.7. For the hub-to-tip ratio, the optimum value is 0.7 when the turbine is operated at lower Reynolds number. However, its value seems to be 0.6 at higher Reynolds number in the tested range.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.1923-1931
• /
• 2004

Manufacturing of complex surface plates in stern and stem is a major factor in cost of a preliminary ship design by computing process. If these hull plate parts are effectively classified, it helps to compute the processing cost and find the way to cut-down the processing cost. This paper presents a new method to classify surface plates effectively in the preliminary ship design using neural network. A neural-network-based ship hull plate classification program was developed and tested for the automatic classification of ship design. The input variables are regarded as Gaussian curvature distributions on the plate. Various applicable rules of network topology are applied in the ship design. In automation of hull plate classification, two different numbers of input variables are used. By observing the results of the proposed method, the effectiveness of the proposed method is discussed. As a result, high prediction rate was achieved in the ship design. Accordingly, to the initial design stage, the ship hull plate classification program can be used to predict the ship production cost. And the proposed method will contribute to reduce the production cost of ship.

• Journal of Chest Surgery
• /
• v.28 no.8
• /
• pp.731-741
• /
• 1995

Cardiac valve allografts have been used as replacements for diseased valves and right ventricular outflow tract reconstruction, the long term follow-up of which has been reported satisfactory. For a good long-term result, it is essential that the allograft be viable at implantation. In this study, we aimed at preparing the cardiac valve allografts aseptically, preserving them at cold- and cryo-conditions, and testing the viability of the allografts after preservation by four methods. We tested the viability of the cardiac valve allografts preserved in cold refrigerated state[4$^{\circ}$C in nutrient media & in liquid nitrogen tank[cryopreservation under -149$^{\circ}$C for pre-planned time periods. The testing methods were 1 glucose utility test 2 tissue culture 3 thymidine uptake test and 4 histologic evidence by light microscopy. We observed no differences in the viability between cold- & cryo-groups and similar results among the methods for testing the viability. In conclusion, there was no difference in the viability between cold- and cryopreserved-allografts at least for 14 days of preservation. And glucose utility test and thymidine uptake test were satisfactory in the evaluation of the allograft viability, since they were easy and rapid with relatively quantitative results.

• Korean Journal of Community Nutrition
• /
• v.3 no.2
• /
• pp.273-280
• /
• 1998

This study was designed to estimate the improvement of Validity for food frequency questionnaire(FFQ) by offering multiple choice portion size in developing a questionnaire. Validity of the two methods(food frequency questionnaire I=FFQ I & Food frequency questionnaire II=FFQ II) was tested in comparison with reference method of the 7-day weighed record(7DWR). Dietary consumption data of the three methods(FFQ I, FFQ II & 7DWR) were collected from 101 female university students for the analysis. Validity was measured in two categories : One was the nutrient intake value from the three methods, the other was the identification of between individual variation within the group. Spearman's rank order correlation test and distribution graphs were used for the analysis. The result showed that individual intake value of the FFQII was closer to that of the 7DWR than that of the FFQ I.Spearman's rank order correlation between the FFQII and the 7DWR did not show any improved correlation. The distribution graphs of nutrient intake derived from both the FFQ I and the FFQII were different from that of the 7DWR. Therefore, it could be suggested that single one portion size food frequency questionnaire is an equally efficient method as a multiple choice food frequency questionnaire to be adopted in epidemiologic studies.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.10 no.2
• /
• pp.11-20
• /
• 1986

This study is to examine the colorfastness of leathers which has been tested for concentration of dyestuff and method of dyeing. This study Particularly attempts to solve some problems of colorfastness in wearing and treating leather goods. The finding of this study can summarized as follows: 1. In dyeing garment leathers classified by concentration, the colorfastness to light improves as concentration increases. 2. As the result the more concentration increases, the more the colorfastness to rubbing declines. 3. In colorfastness to dry cleaning, the grade of color fading has been to be high but that of staining to be bad as concentration increases. 4. In assessing change in colorfastness, grades to light and rubbing after coating have been found to be better than that before coating. 5. In colorfastness to dry cleaning after coating, both grades of color fading and staining have been found to be bad.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.2
• /
• pp.80-86
• /
• 1995

The bacterial strain WC-17 able to produce chitinase was isolated from soil using an enrichment technique. The isolated strain was identified as Acinetobacter sp. judging by their morphological and physiological characterisitics. The optimal culture conditions for the production of chitinase of Acinetobacter sp. WC -17 are 1.5% colloidal chitin and 1 % tryptone at $30^{\circ}C$ with pH 6.5. Since the enzyme was rapidly produced in a culture supplied with chitin, glucose, or N-acetylglucosamine but not with other polymers and monosaccharide, the enzyme was considered to be an inducible enzyme. Notably N- acetylglucosamine and glucose were found to be effective inducers at low concentrations but repressors at excessive concentrations. The cultural supernatant of Acinetobacter sp. WC-17 inhibited the growth of phytopathogenic fungi such as P.oryzae, R.solani, and F.solani. Among the phytopathogenic fungi tested, P.oryzae was the most sensitive. The conventional agar plate (PDA containing 1 % colloidal chitin) method also produced the same result.