• International Journal of Automotive Technology
• /
• v.8 no.2
• /
• pp.165-177
• /
• 2007

Predictions of diesel particulate filtration are typically made by modeling of a particle collection, and providing particle trapping levels in terms of a pressure drop. In the present study, a series of single channel diesel particulate filter (DPF) experiments are conducted, the pressure traces are inversely analyzed and essential filtration parameters are deducted for model closure. A DPF filtration model is formulated with a non-linear description of soot cake regression. Dependence of soot cake porosity, packing density, permeability, and soot density in filter walls on convective-diffusive particle transportation is examined. Sensitivity analysis was conducted on model parameters, relevant to the mode of transition. Soot cake porosity and soot packing density show low degrees of dispersion with respect to the Peclet number and have asymptotes at 0.97 and $70\;kg/m^3$, respectively, at high Peclet number. Soot density in the filter wall, which is inversely proportional to filter wall Peclet number, controls the filtration mode transition but exerts no influence on termination pressure drop. The percolation constant greatly alters the extent of pressure drop, but is insensitive to volumetric flow rate or temperature of exhaust gas at fixed operation mode.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.1
• /
• pp.22-29
• /
• 2004

An international project, known as Argo, for collecting data on temperature, salinity and velocity of currents in the world's oceans, has been started in the year 2000 and the full Argo array of approximately 3000 floats will be deployed by 2006. 18 countries deployed 1,023 floats, which are operating in the ocean of the world as of December 2003. In the present study, we tried to predict float distribution and a rate of drifting ashore of the floats after their termination based upon a product of the ocean general circulation model of JAMSTEC (Japan Marine Science and Technology Center). We first evaluated reliability of the model prodilct quantitatively by comparing trajectories of surface buoys of WOCE Surface Velocity Program (SVP) and those predicted by the model surface current field. It is found that the model is acceptable for practical application to deploy floats and to estimate those trajectories. 653 particles at 3-degree spacing are used to investigate the ratio of floats drifted ashore, given that during the first 4 years floats cycle between the surface and 2000m for 10 days and then floats are on just the surface for 100 years. The simulation indicates that about 29% of deployed floats will be drifted ashore within 100-year.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.3
• /
• pp.65-72
• /
• 2010

We propose the asymmetric 2.5Gbps/622Mbps PON(Passive Optical Network) in order to reduce the bandwith of filter at receiver with inverse RZ(Return to Zero) code coded downstream and NRZ(Non Return to Zero) upstream re-modulation. I theoretically analyze BER(Bit Error Rate) performance and the power sensitivity with the optimal threshold level by performing simulation with MATLAB according to the types of downstream data. The results have shown that the optimal threshold level at the optical receiver could be saturated at 0.33 as the optical received power increase more than -26dBm to keep $10^{-12}$ of BER to a minimum. Also the power sensitivity is more improved by about 3dB by fixing the threshold level at 0.33 than the conventional receiver. The proposed system can be a useful technology for optical access networks with asymmetric upstream and downstream data rates because the optical receiver can be used without controlling threshold levels and that does not require a light source in optical network unit (ONU) and its control circuits in the optical line termination (OLT).

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.627-630
• /
• 2014

The latest video coding standard, high efficiency video coding (HEVC) achieves high coding efficiency by employing a quadtree-based coding unit (CU) block partitioning structure which allows recursive splitting into four equally sized blocks. At each depth level, each CU is partitioned into variable sized blocks of prediction units (PUs). However, the determination of the best CU partition for each coding tree unit (CTU) and the best PU mode for each CU causes a dramatic increase in computational complexity. To reduce such computational complexity, we propose a fast PU decision algorithm that early terminates PU search. The proposed method skips the computation of R-D cost for certain PU modes in the current CU based on the best mode and the rate-distortion (RD) cost of the upper depth CU. Experimental results show that the proposed method reduces the computational complexity of HM12.0 to 18.1% with only 0.2% increases in BD-rate.

• Korean Journal of Occupational Health Nursing
• /
• v.20 no.1
• /
• pp.93-103
• /
• 2011

Purpose: This study was conducted to assess reported industrial accidents and non-reported industrial accidents that took place in 63 small and medium sized manufacturing industries located in Daegu and Gyeongsangbuk-do in the year of 2009. Methods: During the period from January to December 2009, the number of industrial accidents that happened each month was examined according to the characteristics of industry, industrial accidents, workers with industrial accidents, treatment, as well as causes and treatment of the non-reported. Results: The total incidence rate of industrial accidents was 3.48%, of which only 0.31% reported. The incidence rate in packing and distribution among manufacturing workplace, and in the industry with 50~99 employees, was higher than the other groups. Of the non-reported, over 80% in required under 10 days of medical treatment, and 56% in required cost of less than 100,000 won. Kappa values were 0.771 concurrence in opinions for causes of non-reported, and 0.571 concurrence in opinions for management termination of non-reported between the employees and employer. Conclusion: It is suggested that more supportive policy and precise, nationwide survey on the actual state of industrial accidents, including non-reported cases, be implemented to efficiently manage industrial accidents.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.73-76
• /
• 2004

The rate of oxygen consumption of the silkworm eggs was measured to set up the barometer for measuring the effect of egg chilling on diapause termination. In diapause eggs, $O_2$ uptake showed a maximum of 79.2 ${mu}ell$/mg eggs/hr, at one day after oviposition and then gradually decreased to 2.2${mu}ell$/mg eggs/hr at 9days. The rates of oxygen uptake of eggs raised immediately after HCl-treatment and reached to a maximal level of 484.5 ${mu}ell$/mg eggs/hr in 9-day-old eggs, which corresponds to 220 fold that of diapause eggs, and the hatching ability was also over 50％. In order to break diapause, eggs incubated at $25^{\circ}C$ for 30 days after oviposition had to be kept at least for 45 days at 5$^{\circ}C$, but chilled eggs for 90 days or longer hatched at 10 days as normal hatching periods. We also investigate periods which the value of $O_2$ uptake of eggs chilled during 15 to 120 days at 5$^{\circ}C$ reached at 200 ${mu}ell$/mg eggs/hr. As a result of that, $O_2$ uptake of eggs chilled during 15 to 45days were not reached at 200 ${mu}ell$/mg eggs/hr and longer the chilling durations are, the higher the rate of $O_2$ uptake is and the longer the chilling durations are, the shorter the periods up to hatching is. And also, hatch-ability increased rapidly as $O_2$ uptake reaches over 20/eggs/hr.

• Journal of Veterinary Clinics
• /
• v.17 no.1
• /
• pp.109-120
• /
• 2000

To evaluate anesthetic effecto of propofol infusion after premedication with xylazine, 20 days were randomly assigned 4 groups. Propofol was infused (group 1: 0.2 mg/kg/min, group 2 : 0.4 mg/kg/min, group 3 : 0.6 mg/kg/min, group 4 : 0.8 mg/kg/min) for a period of 90 minute immediately after premedication with xylazine(1 mg/kg) and atropine(0.05mg/kg) under oxygen supplementation. Induction of anesthesia was rapid and smooth providing satisfactory conditions for intubation in all the dogs. No vomiting and cyanosis were observed after induction and during propofol infustion. There was pain reflex in group 1 but not in group 3 and 4. Mean arousal times (mins) were $6.18{\pm}3.65(group 1), 13.07{\pm}5.05(group 2), 22.06{\pm}6.48(group 3) and 23.33{\pm}9.28 (group 4) and Mean walking times were 16.20{\pm}6.15(group 1), 15.80{\pm}4.73(group 2), 28.27{\pm}7.55 (group 3), 39.10{\pm}13.75$ (group 4) respectively. In group 4, body temperature during total infusion period in group 3, 4. Hematologic values (WBC, RBC, PCV) and serum chemistry values(ALT, AST, BUN, creatinite) were monitored before anesthesia, 1 hour and 1 day after termination of infusion postanestesia. No significant changes were monitored in all experimental group. Although propofol infusions of 0.2 mg/kg/min and 0.4mg/kg/min were considered too low to maintain a suitable depth of anesthesia, but that of 0.6mg/kg/min were considered too low to maintain a suitable depth of anesthesia, but that of 0.6mg/kg/min proper to provide a light planes for minor surgical procedure during 90 minutes with xylazine premedication.

• Journal of Digital Contents Society
• /
• v.18 no.7
• /
• pp.1411-1418
• /
• 2017

The batch job scheduler recognizes the computational resources configured in the cluster environment and plays a role of efficiently arranging the jobs in order. In order to efficiently use the limited available resources in the cluster, it is important to analyze and characterize the characteristics of user tasks. To do this, it is important to identify various scheduling algorithms and apply them to the system environment. Most scheduler software reflects the user's work environment, from job submission to termination, as well as the state of the inventory and system status of the entire managed object. It also stores various information related to task execution, such as job scripts, environment variables, libraries, wait for tasks, start and end times. In this paper, we analyze the execution log of the scheduler such as user 's success rate, execution time, and resource size through information related to job execution through batch scheduler. Based on this, it can be used as a basis to optimize the system by increasing the utilization rate of resources.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.631-642
• /
• 2013

For the emerging High Efficiency Video Coding (HEVC) standard, a fast transform unit (TU) decision method is proposed. HEVC defines the TU representing a region sharing the same transformation, and it allows a residual block to be split into multiple TUs recursively to form a quadtree. By using the quadtree of TUs, HEVC supports various transform sizes from $4{\times}4$ to $32{\times}32$. The various sizes of TUs can provide a good coding efficiency, whereas this may increase encoding complexity dramatically. In the assumption that a TU with highly compacted energy is unlikely to be split, the proposed method determines TU sizes according to the position of the last non-zero transform coefficient. In the experimental results, the proposed method reduced 18% encoding run time with the negligible coding loss of 0.7% BD-rate for the Random_access case.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.1957-1963
• /
• 2019

A UVC photo-Fenton advanced oxidation process (AOP) was studied to develop a process for the decomposition of oxalic acid waste generated in the chemical decontamination of nuclear power plants. The oxalate decomposition behavior was investigated by using a UVC photo-Fenton reactor system with a recirculation tank. The effects of the three operational variables-UVC irradiation, H₂O₂ and Fenton reagent-on the oxalate decomposition behavior were experimentally studied, and the behavior of the decomposition product, CO₂, was observed. UVC irradiation of oxalate resulted in vigorous CO₂ bubbling, and the irradiation dose was thought to be a rate-determining variable. Based on the above results, the oxalate decomposition kinetics were investigated from the viewpoint of radical formation, propagation, and termination reactions. The proposed UVC irradiation density model, expressed by the first-order reaction of oxalate with the same amount of H₂O₂ consumption, satisfactorily predicted the oxalate decomposition behavior, irrespective of the circulate rate in the reactor system within the experimental range.