• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.319-328
• /
• 2006

A simple approximation method for the stress intensity factor at the tip of the axial semielliptical cracks on the cylindrical vessel is developed. The approximation methods, incorporated in VINTIN (Vessel INTegrity analysis-INner flaws), utilizes the influence coefficients to calculate the stress intensity factor at the crack tip. This method has been compared with other solution methods including 3-D finite element analysis for internal pressure, cooldown, and pressurized thermal shock loading conditions. For these, 3-D finite-element analyses are performed to obtain the stress intensity factors for various surface cracks with t/R=0.1. The approximation solutions are within $\pm2.5%$ of the those of finite element analysis using symmetric model of one-forth of a vessel under pressure loading, and 1-3% higher under pressurized thermal shock condition. The analysis results confirm that the approximation method provides sufficiently accurate stress intensity factor values for the axial semi-elliptical flaws on the surface of the reactor pressure vessel.

• Plant Biotechnology Reports
• /
• 제2권3호
• /
• pp.207-212
• /
• 2008

Plantlets of Alocasia amazonica regenerated under a photon flux density (PFD) of 15 or $30{\mu}mol\;m^{-2}s^{-1}$ showed better growth and development than those grown under higher PFDs. While chlorophyll a and chlorophyll b decreased, the number of stomata increased with increasing PFD. Photoperiods also affected plantlet growth and stomatal development. Highest growth was observed for the short photoperiod (8/16 h) and for equinoctial (12/12 h) light and dark periods. Very few stomata developed in the leaves of plantlets grown under a short photoperiod (8/16 h) and the number of stomata increased with increasing light period. In conclusion, both light intensity and photoperiod independently affect growth of A. amazonica and development of stomata, depending on the intensity and duration of light treatment.

• 한국정밀공학회지
• /
• 제29권10호
• /
• pp.1096-1100
• /
• 2012

In the phase-shift measurement method, the distance light travels can be obtained based on the phase difference between the reference signal and the measured signal. When the object having various colors is measured, the intensity of the measured signal much varies even at the same distance, and it causes different phase delay due to wide dynamic range input to a signal processing circuit. In this work, an measured intensity control method is proposed to solve this phase delay problem.

• Journal of Mechanical Science and Technology
• /
• 제17권8호
• /
• pp.1120-1132
• /
• 2003

A problem of a circular elastic inhomogeneity interacting with a crack under uniform loadings (mechanical tension and heat flux at infinity) is solved. The singular. integral equations for edge and temperature dislocation distribution functions are constructed and solved numeric-ally, to obtain the stress intensity factors. The effects of the material property ratio on the stress intensity factor (SIF) are investigated. The computed SIFs are used to predict the kink angle of the crack when the crack grows.

• 조명전기설비학회논문지
• /
• 제28권3호
• /
• pp.18-25
• /
• 2014

In this paper, tried to find out the proper luminous intensity distribution for the cabin with low-level height by analyzing the changing tendency of discomfort glare according to luminous intensity distribution of marine indoor luminaires using Unified Glare Rating(UGR). First, we analyzed UGR of the indoor luminaires in the existing cabin, and then evaluated influence on luminous intensity distributions of marine indoor luminaire. The results showed that $cos^2{\Theta}$ distribution got almost low UGR results regardless of height and UGR 16.5 in cabin height of 2m. However, Gaussian distribution with the same beam angle showed that UGR results consistently increased by getting lower height and UGR 20.7 in the same height. In conclusion, the $cos^2{\Theta}$ distribution in consideration of luminous intensity on the direction of observer's eye was appropriate for general cabin indoor luminaires because it decreased UGR in the low-level height.

• Journal of Ginseng Research
• /
• 제26권4호
• /
• pp.206-212
• /
• 2002

인삼 본래의 향기 강도를 기기분석적으로 평가할 수 있는 방법을 확립하기 위해서, SPME-GC를 이용한 휘발성 향성분 분석값과 코로써 느끼는 강도와의 상관관계를 연구하였다. 여러 장소에서 재배된 인삼시료(수삼, 백삼, 홍삼)에 대한 향기성분석결과와 코로써 느끼는 측정 결과와의 상관관계를 분석해 본 결과, 백삼과 홍삼의 경우에 관능평가에 의한 향의 강도가 높으면 GC의 peak area값도 크다는 상호관계를 얻음으로써 인삼 본래 향의 강도를 객관적으로 표기 할 수 있는 계기를 마련할 수 있었다.

• 한국대기환경학회지
• /
• 제23권3호
• /
• pp.353-363
• /
• 2007

To differentiate temperature effect from the light intensity effect on the formation of secondary products during the photooxidation of toluene-$NO_x$-air mixtures, steady-state air temperature was changed from $20^{\circ}C\;to\;33^{\circ}C$ at the same light intensity of $0.39min^{-1}$ in an indoor smog chamber. Smog chamber consisted of 64 blacklights and a $5.8m^3$ reaction bag made of Teflon film. Air temperature was controlled by an air-conditioning system. The starting time for rapid conversion of NO to $NO_2$ was slightly delayed with decreasing air temperature. In contrast to light intensity effect, the ozone formation time and the ozone production rate were insensitive to air temperature. Although the formation time for secondary organic aerosols was not changed, the particle number concentration increased with temperature. However, the newly formed secondary organic aerosol mass at lower temperature was higher than that at higher temperature. Since light intensity significantly affected the starting time and quantity of ozone and aerosol formation, it is considered that the temperature could contribute partly the quantity of aerosol formation during the photooxidation of toluene-$NO_x$-air mixtures.

• 한국기계가공학회지
• /
• 제11권6호
• /
• pp.175-182
• /
• 2012

Light characteristics of the monochromatic red(R), blue(B), green(G) and white(W) and the mixed LED (B-R LED) were investigated by light control a Spectrometer-MMS1 and an illuminometer. The power consumption of each LED was 1W and R LED has five wavelength bands(600nm, 640nm, 660nm, 680nm, 750nm). The light intensity of each LED was changed in a range 10~100%. As a results, the wavelength and the spectrum distribution of R LED increase with increasing light intensity but the wavelength of B, G, W LED decreases. It was found that illumination of each mononochromatic and B-R LED increases linearly with increasing light intensity. It was confirmed that the illumination intensity of R-B light has greater values than those obtained by monochromatic light at the same conditions.

• Journal of Korea Trade
• /
• 제24권8호
• /
• pp.1-18
• /
• 2020

Purpose - This paper examines how differently output and input tariffs affect domestic employment across industrial characteristics of comparative advantage such as labor quality and capital intensity. Design/methodology - The paper focuses on 453 Korean industries from 2007 to 2014 because Korea is a typical example of a natural resource-scarce open economy and experienced the transition of the export pattern from labor intensity to technology intensity during this period. Findings - The results show that input tariff reduction stimulated total employment, focusing on the early 2010s, while the effects of output tariff reduction were statistically insignificant in general. However, the stimulation effects of output tariff reduction on employment were found in comparative advantage industries with greater labor quality and capital intensity. As for input tariff reduction, its stimulation effects on employment were more prominent in comparative disadvantage industries with lower labor quality and capital intensity. Originality/value - These results provide significant implications for natural resource-scarce open economies which are experiencing the transition of the export pattern from labor intensity to technology intensity and the unequal distribution of income after trade liberalization: imported intermediate inputs has become increasing important, leading to trade effects on employment and alleviation of income inequality.

• International Journal of Reliability and Applications
• /
• 제13권2호
• /
• pp.81-90
• /
• 2012

Engineering systems are usually repairable. The reliability of a repairable system can be represented by failure intensity function. A type of shape of failure intensity function is called a failure pattern. Reliability-Centred Maintenance (RCM) presents six typical failure patterns but its definition is unclear. It is an open issue how to recognize the failure pattern of repairable systems. This paper first discusses the problems of RCM with the notion of failure pattern; then presents the method for failure pattern recognition; and finally proposes a flexible failure intensity function model. The appropriateness of the model is illustrated by a real-world example.