• Journal of Welding and Joining
• /
• v.32 no.2
• /
• pp.43-47
• /
• 2014

Famous artificial neural network (ANN) is applied to predict proper process window of arc welding. Target weldment is variously combined lap joint fillet welding of automotive steel plates. ANN's system variable such as number of hidden layers, perceptrons and transfer function are carefully selected through case by case test. Input variables are welding condition and steel plate combination, for example, welding machine type, shield gas composition, current, speed and strength, thickness of base material. The number of each input variable referred in welding experiment is counted and provided to make it possible to presume the qualitative precision and limit of prediction. One of experimental process windows is excluded for predictability estimation and the rest are applied for neural network training. As expected from basic ANN theory, experimental condition composed of frequently referred input variables showed relatively more precise prediction while rarely referred set showed poorer result. As conclusion, application of ANN to arc welding process window derivation showed comparatively practical feasibility while it still needs more training for higher precision.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.5
• /
• pp.425-430
• /
• 2006

To meet an increasing demand for high performance in gun dynamic plant, both a precise and a fast response positioning are strongly required for the gun servo system. A mode switching control(MSC) scheme, which includes a fine stabilizing controller, fast positioning one and a switching function, is widely used to meet this requirement. Stabilization is performed through PID controller, while a time optimal control method is used for target designation. In this paper, a modified PTOS(Proximate Time Optimal Servomechanism) algorithm is derived so as to accommodate the damping term in the gun plant model. Also, applying a mode switching strategy, the bumpless transfer is made possible when the controller switches from PTOS to PID. To show the effectiveness of the overall control system, simulation results are given including the gun dynamics.

• Journal of the Optical Society of Korea
• /
• v.5 no.2
• /
• pp.33-36
• /
• 2001

Common methods of determining the spatial resolution of fiber-optic image guides are by measuring the diameter of individual microfibers or by the use of a resolution test target. However these methods cannot provide enough information of spatial resolution in ultrathin fiber-optic image guides. In this study, a simple method to measure the modulation transfer function (MTF) of an mage guide was developed. The MTFs of ultrathin image guides with 3 and 4${\mu}{\textrm}{m}$ Um diameter were measured by examining transmitted sharp edge image. This method should be especially useful for measuring spatial resolution of ultrahigh resolution image guides with less than 5 ${\mu}{\textrm}{m}$ diameter microfibers because their spatial resolution cannot be determined by individual microfiber diameter due to crosstalk and leaky ray phenomena.

• Journal of Broadcast Engineering
• /
• v.23 no.4
• /
• pp.519-525
• /
• 2018

This paper deals with noise suppression of multi-channel data captured by microphone array using multi-channel Wiener filter. Multi-channel Wiener filter does not rely on information about the direction of the target speech and can be partitioned into an MVDR (Minimum Variance Distortionless Response) spatial filter and a single channel spectral filter. The acoustic transfer function between the single speech source and microphones can be estimated by subspace decomposition of multi-channel Wiener filter. The errors are incurred in the estimation of the acoustic transfer function due to the errors in the estimation of correlation matrices, which in turn results in speech distortion in the MVDR filter. To alleviate the speech distortion in the MVDR filter, diagonal loading is applied. In the experiments, database with seven microphones was used and MFCC distance was measured to demonstrate the effectiveness of the diagonal loading.

• Journal of Advanced Navigation Technology
• /
• v.14 no.4
• /
• pp.571-577
• /
• 2010

Driving aircraft requires extremely complicated and detailed information processing. Pilots perform their tasks by selecting the information relevant to them. In this processing, spatial information presented simultaneously through crossmodal link is advantageous over the one provided in singular sensory mode. In this paper, probability to apply providing visual spatial information along with auditory information to enemy tracking system in aircraft navigation is empirically investigated. The result shows that auditory spatial information, which is virtually created through HRTF is advantageous to visual spatial information alone in attention processing. The findings suggest auditory spatial information along with visual one can be presented through crossmodal link by utilizing stereophonic sound such as HRTF. which is available in the existing simple stereo system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.342-348
• /
• 2013

In this paper, the evaluation method for the responsivity and noise characteristics of an infrared thermal imaging camera was presented. Signal transfer function and noise equivalent temperature difference of the infrared thermal imaging camera were obtained by using a differential mode blackbody that is able to control the temperature difference ${\Delta}$T between an infrared target and its background. And we verified the suitability of our evaluation method through comparison between the found noise equivalent temperature difference and the specification of the camera. In addition, the difference of 0.01 K of the two noise equivalent temperature differences calculated from with and without nonuniformity correction suggests that the nonuniformity correction is essential process for the evaluation of the infrared thermal imaging camera.

• Journal of the Korean Society of Radiology
• /
• v.5 no.6
• /
• pp.421-426
• /
• 2011

This research was accomplished to assess dose effects on image quality at computed radiography (CR). The ultimate target of the research was finding optimized exposure that provides necessary image quality for the clinical chest diagnosis. Modulation transfer function (MTF), normalized noise power spectrum (NNPS), and Noise equivalent quanta (NEQ) corresponding to the different doses were measured for the assessment of image quality. The preparation of "edge test device" used in MTF measurement and experimental geometry setup were followed by the recommendations of International Electrotechnical Commission (IEC). The experimental results show the necessary image quality can be achieved even at a half of the automatic exposure control (AEC) setting dose for chest diagnosis. It means that the patient exposure can be reduced dramatically by using optimized dose.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.28-32
• /
• 2009

In order to obtain high quality images of thin objects, we performed an experiment of proton radiography by using low energy protons generated from the interaction of an ultrashort ultraintense laser with solid targets. The protons were produced from a thin polyimide target irradiated by the laser pulse, and their maximum energy was estimated at up to 1.8 MeV. A CR-39 nuclear track detector was used as a proton radiography screen. The proton images were obtained by using an optical microscope and the spatial resolution was evaluated by a Modulation Transfer Function (MTF). We have achieved about $10\;{\mu}m$ spatial resolution of images. The obtained spatial resolution shows about $4{\sim}5$ times better value than the conventional X-ray radiography for inspection or non-destructive test (NDT) purpose.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.1
• /
• pp.38-43
• /
• 2012

Sound absorption capability and mechanical properties such as MOE and MOR in bending of miscanthus particle based board were estimated by the two microphone transfer function method and three point bending method, respectively. The results are summarized as follows: The sound absorption coefficients of miscanthus particle based board was higher than those of commercial gypsum board which is well used as sound absorbing barrier. The MOR and MOE of miscanthus particle based board increased with increasing of board density. The sound absorption coefficients of miscanthus particle based board were 50~80% in the frequency range of about 1~2.5 Khz. In entire frequency range, those value increased with target board density decreasing.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.390-394
• /
• 2004

The genetically modified glyphosate-tolerant soybean contains the following introduced DNA sequences: the EPSPS (5-enol-pyruvylshikimate-3-phosphate synthase) gene from Agrobacterium sp. strain CP4, the 35S promoter from the cauliflower mosaic virus, and the NOS terminator from Agrobacterium tumefaciens. In the present study, detection of these introduced DNAs was performed by amplification using the polymerase chain reaction (PCR). A multiplex PCR method was also applied to prevent false positive results. When primers for 35S promoter, nos3', CTP(chloroplast transit peptide), and CP4 EPSPS (EPSPS from Agrobacterium sp. CP4) were used, positive results were obtained in PCR reactions using DNA from genetically modified glyphosate-tolerant soybeans. There were no false positive results when using DNA from non-genetically modified soybeans. The CP4 EPSPS gene was detected when less than 125 pg glyphosate-tolerant soybean DNA was amplified. Lectin Lel and psb A were amplified from both non-genetically modified and genetically modified glyphosate-tolerant soybean DNA. Multiplex PCR was performed using different primer sets for actin Sacl, 35S promoter and CP4 EPSPS. The actin gene was detectable in both non-genetically modified and glyphosate-tolerant soybeans as a constant endogenous gene. Target DNAs for the 35S promoter, and CP4 EPSPS were detected in samples containing 0.01-0.1% glyphosate-tolerant soybean, although there were variations depending on primers by multiplex PCR. Soybean seeds from five plants of non-genetically modified soybean were co-cultivated for six months with those of genetically modified soybean, and they were analyzed by PCR. As a result, they were not positive for 35S promoter, nos3' or CP4 EPSPS. Therefore, these results suggest there was no natural crossing of genes between glyphosate-tolerant and non-genetically modified soybean during co-cultivation, which indicates that gene transfer between these plants is unlikely to occur in nature.