• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.593-599
• /
• 2007

PC based DVR replaces existing analog CCTV system therefore expands the field and DVR is used for monitoring and security so it requires exact time(clock). But DVR system can't maintains exact clock causing several reasons. For providing exact time information we should use additional system. For economical and usable environment, using GPS system is most suitable suggested solution than use WAN(Wide Area Network). Therefore in this paper for analysis the result of PC based DVR's system clock using GPS system, 1) clock source receiving module that receives the clock form GPS satellite and 2) GPSW H/W units that provide clock source to PC Based DVR 3)Daemon software named PCSW which adjust PC's clock so system could reduced the clock difference with UTC clock and measured the result.

• The KIPS Transactions:PartC
• /
• v.11C no.1
• /
• pp.39-46
• /
• 2004

It has been happening to transfer not only the general information but also the valuable information through the universal Internet. So security accidents as the expose of secret data and document increase. But we don't have stable structure for transmitting important data. Accordingly, in this paper we intend to use network based Intrusion Detection System modules and detect the extrusion of important data through the network, and propose and design the method for investigating concealment data to protect important data and investigate the secret document against the terrorism. We analyze the method for investigating concealment data, especially we use existing steganalysis techniques, so we propose and design the module emphasizing on the method for investigating stego-data in E-mail of attach files or Web-data of JPG, WAVE etc. Besides, we analyze the outcome through the experiment of the proposed stego-data detection system.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.365-368
• /
• 1997

We are developing a small gamma camera or imaging malignant breast tumors. The small scintillation camera system consists of NaI(Tl) crystal ($60\;{\times}\;60\;{\times}\;6\;mm^3$) coupled to position sensitive photomultiplier tube (PSPMT), nuclear instrument module (NIM), analog to digital converter (ADC), and personal computer. High quality flood source image and hole mask image were obtained using the gamma camera developed in this study. Breast phantom containing $2{\sim}7\;mm$ diameter spheres was successfully imaged with parallel hole collimator. The obtained image displayed accurate activity distribution over the imaging field of view. Linearity and uniformity correction algorithms are being developed. It is believed that the developed small gamma camera could be useful or detection of malignant breast cancer.

• Journal of Korean Home Economics Education Association
• /
• v.5 no.1
• /
• pp.113-120
• /
• 1993

This study in order to seek for a more effective teaching method, I am to propose a measure that the career education material for female middle school students a program produced already could be applicable on the class and to understand the efficiency by examining practically it to the student. The research method was to make up a questionnaire and gaze two kinds of educational effect. The procedure was that, after surveying the general features in order to help them known their consciousness on the career education Researcher practiced common theorectical teaching on comparative class and moduling teaching on comparative class through making a guiding data. Then Researcher analysed the changing o consciousness on career, knowledge on kinds and numbers of jobs, and the results and rate of interest in the teaching with persentage and t-test. The results are as followed; First, on the consciousness on career, both group showed little change on their wishful job between before and after teaching. On the purpose to get a job, consciousness on work and job, and fixed idea of job on gender, there were some changes, but both groups had few defferences in the changing rate. Second on the consciousness on work and job experimental group recognized the variety of job more than comparative group and wrote more hind of job. Third on the evaluating result, the record of experimental group was higher. Fourth, on the rate of interesting in learning the rate of experimental group was higher. As observed the class applied by the module of female career education is effective, since experimental group showed more consciousness on work and job, evaluation of record after teaching and the rat of interesting in learning, through there was no difference in the consciousness of the career.

• Molecules and Cells
• /
• v.41 no.9
• /
• pp.842-852
• /
• 2018

Notch signaling is an evolutionarily conserved pathway and involves in the regulation of various cellular and developmental processes. Ligand binding releases the intracellular domain of Notch receptor (NICD), which interacts with DNA-bound CSL [CBF1/Su(H)/Lag-1] to activate transcription of target genes. In the absence of NICD binding, CSL down-regulates target gene expression through the recruitment of various corepressor proteins including SMRT/NCoR (silencing mediator of retinoid and thyroid receptors/nuclear receptor corepressor), SHARP (SMRT/HDAC1-associated repressor protein), and KyoT2. Structural and functional studies revealed the molecular basis of these interactions, in which NICD coactivator and corepressor proteins competitively bind to ${\beta}-trefoil$ domain (BTD) of CSL using a conserved ${\varphi}W{\varphi}P$ motif (${\varphi}$ denotes any hydrophobic residues). To date, there are conflicting ideas regarding the molecular mechanism of SMRT-mediated repression of CSL as to whether CSL-SMRT interaction is direct or indirect (via the bridge factor SHARP). To solve this issue, we mapped the CSL-binding region of SMRT and employed a 'one- plus two-hybrid system' to obtain CSL interaction-defective mutants for this region. We identified the CSL-interaction module of SMRT (CIMS; amino acid 1816-1846) as the molecular determinant of its direct interaction with CSL. Notably, CIMS contains a canonical ${\varphi}W{\varphi}P$ sequence (APIWRP, amino acids 1832-1837) and directly interacts with CSL-BTD in a mode similar to other BTD-binding corepressors. Finally, we showed that CSL-interaction motif, rather than SHARP-interaction motif, of SMRT is involved in transcriptional repression of NICD in a cell-based assay. These results strongly suggest that SMRT participates in CSL-mediated repression via direct binding to CSL.

• Journal of Surface Science and Engineering
• /
• v.48 no.6
• /
• pp.297-302
• /
• 2015

Nanocrystalline diamond(NCD) coated aluminium plates were prepared and applied as heat sinks for LED modules. NCD films were deposited on 1 mm thick Al plates for times of 2 - 10 h in a microwave plasma chemical vapor deposition reactor. Deposition parameters were the microwave power of 1.2 kW, the working pressure of 90 Torr, the $CH_4/Ar$ gas ratio of 2/200 sccm. In order to enhance diamond nucleation, DC bias voltage of -90 V was applied to the substrate during deposition without external heating. NCD film was identified by X-ray diffraction and Raman spectroscopy. The Al plates with about 300 nm thick NCD film were attached to LED modules and thermal analysis was carried out using Thermal Transient Tester (T3ster) in a still air box. Thermal resistance of the module with NCD/Al plate was 3.88 K/W while that with Al plate was 5.55 K/W. The smaller the thermal resistance, the better the heat emission. From structure function analysis, the differences between junction and ambient temperatures were $12.1^{\circ}C$ for NCD/Al plate and $15.5^{\circ}C$ for Al plate. The hot spot size of infrared images was larger on NCD/Al than Al plate for a given period of LED operation. In conclusion, NCD coated Al plate exhibited better thermal spreading performance than conventional Al heat sink.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.53.2-53.2
• /
• 2014

IGRINS, the Immersion GRating INfrared Spectrometer, is a near-infrared wide-band high-resolution spectrograph jointly developed by the Korea Astronomy and Space Science Institute and the University of Texas at Austin. IGRINS employs three HAWAII-2RG focal plane array (FPA) detectors. The mechanical mounts for these detectors serves a critical function in the overall instrument design: Optically, they permit the only positional compensation in the otherwise "build to print" design. Thermally, they permit setting and control of the detector operating temperature independently of the cryostat bench. We present the design and fabrication of the mechanical mount as a single module. The detector mount includes the array housing, a housing for the SIDECAR ASIC, a field flattener lens holder, and a support base. The detector and ASIC housing will be kept at 65 K and the support base at 130 K. G10 supports thermally isolate the detector and ASIC housing from the support base. The field flattening lens holder attaches directly to the FPA array housing and holds the lens with a six-point kinematic mount. Fine adjustment features permit changes in axial position and in yaw and pitch angles. We optimized the structural stability and thermal characteristics of the mount design using computer-aided 3D modeling and finite element analysis. Based on the computer simulation, the designed detector mount meets the optical and thermal requirements very well.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.413-416
• /
• 2017

The development of the internet, which is due to the advent of the fourth industrial revolution, has been slowly affecting our lives. Based on this trend, various products have recently emerged, and have yet to be developed in the context of identifying the dangers of infant babies. Increasingly, children are experiencing problems with detecting and responding to children's lives because of their daily living noise and housekeeping activities. This project attempts to develop a raspberry pie and an audiovisual sensor module to avoid the risk of preventing unwanted behavior from tripping the child's sudden behavior in everyday life. Further, it was designed to provide convenience to the guardian's convenience by implementing the smartphone app with the Wifi signal.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.1
• /
• pp.47-55
• /
• 2014

Almost of alternate computer access devices which assist people with disabilities to utilize the computer connected to computer by some cables or installed in as a S/W program. These devices have some spatial limitations to the people with disabilities, it can't guarantee the free and diverse access to the computer. For these reasons, in this paper, an Android-based mouse program for alternative computer access was developed. A people with physical disabilities who has some limitation of hand movements can use it in anywhere and anytime using only the fine motor skill of the upper limbs. The developed device recognizes the user's point touch and transforms it into the location of mouse cursor. The location information transferred to the computer via Bluetooth communication module equipped in smart devices. Also the group scanning method which can reduce the user's fatigue degree was employed and click, double click, drag & drop functions by hand's movements were equipped. The developed device will help the people with disabilities to use computer with brief touch and convenient operation without spatial limitation.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.6
• /
• pp.131-136
• /
• 2010

The purpose of this study is to provide foundational data for expansion of solar generation in building application, a clean energy, by introducing applicability of solar power generation system on roofs of industrial buildings and computing expected amounts of power and carbon dioxides reduction. As methodologies of this study, after reviewing 120,000 domestic factories to verify the BIPV feasibility for industrial building sthrough theoretical considerations of solar generation system, we calculated BIPV application methods and subsequent expected power generation quantity and carbon dioxide reductions through roof type analysis. we analyzed four cases of expected power generation amounts of solar batteries according to application methods, and when considering that the main type of roofs are slant roofs according to the investigation result about roof forms of domestic industrial complexes, we believe that the module angle of a slant roof around $17^{\circ}$(case3) is most suitable for the application. Finally, we came up with 517,944[TOE] as the corresponding petroleum tonnage based on this computed expected power generation amount and the amount of 1,214,836[$tCO_2$] carbon dioxide reductions by calculating them by energy sources.