• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.45-48
• /
• 2000

A typical map image is consisted of number, symbols and lines that represent contour lines, geographical bounaries, roads, rivers and etc. This paper describe the separation. The separation algorithm is based on structural relation. The separation of proposed method is better than method using only a size of connected component. This proposed method will be used in GIS input system efficiently.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.365-366
• /
• 2006

This paper describes a pre-processing methodology which can apply to remote speech recognition system of service robot in noisy environment. By combining beamforming and blind source separation, we can overcome the weakness of beamforming (reverberation) and blind source separation (distributed noise, permutation ambiguity). As this method is designed to be implemented with hardware, we can achieve real-time execution with FPGA by using systolic array architecture.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.31-37
• /
• 2015

Recently, mobile phones have become necessary tools for everyday life. In this study, a device that can serve as a separation between a touch panel and an LCD module in a mobile phone was devised for mass repair processes at a smaill business. We used a wire cutting method to separate the bonding plate area between the modules. The device is composed of DC motors and stepping motors that can deliver a precise cutting motion. The motor control system is connected by individual control modules to a CAN network. The developed device showed excellent performance at high temperature conditions.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.445-446
• /
• 2007

The goal of this paper is accuracy improvement of appearance inspection by using image separation average value matching method. The appearance inspection of various electronic products and parts has been executed by the eyesight of human. But inspection by eyesight can't bring about uniform inspection result. Because the appearance inspection result by eyesight of human is changed by condition of physical and spirit of the checker. So machine vision inspection system is currently used to many appearance inspection fields instead of the checker. However the inspection result of machine vision is changed by the illumination of workplace. Therefore we have used a average value matching in this paper for improvement of vision inspection accuracy and could increase inspection accuracy of vision system. In other words, we made an effort for elevation of vision inspection accuracy by making the identical image separation average value of reference image and input image. Also this system has been developed only using PC, CCD Camera and Visual C++ for universal workplace.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.52.4-52
• /
• 2002

$\textbullet$ Introduction $\textbullet$ Wiener system identification problem $\textbullet$ Identification method $\textbullet$ Simulation $\textbullet$ Conclusions $\textbullet$ References

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.5
• /
• pp.332-339
• /
• 2012

Beamspace transform algorithm transforms spatial-domain data - such as x, y, z dimension - into incidence-angle-domain data, which is called beamspace-domain data. The beamspace transform method is generally used in source localization and tracking, and adaptive beamforming problem. When the beamspace transform method is used in multichannel audio source separation, the inverse beamspace transform is also important because the source image have to be reconstructed. This paper studies the beamspace transform and inverse transform algorithms for multichannel audio source separation system, especially for the beamspace-domain multichannel NMF algorithm.

• Journal of Sensor Science and Technology
• /
• v.33 no.3
• /
• pp.125-133
• /
• 2024

Gas chromatography (GC) separation technology and metal oxide semiconductor (MOS) gas sensors have been integrated for the effective analysis of volatile sulfur compounds (VSCs) such as H₂S, CH₃SH, (CH₃)₂S, and (CH₃)₂S₂. The separation and detection characteristics of the GC/MOS system using diluted standard gases were investigated for the qualitative and quantitative analysis of VSCs. The typical concentrations of the standard gases were 0.1, 0.5, 1.0, 5.0, and 10.0 ppm. The GC/MOS system successfully separated H₂S, CH₃SH, (CH₃)₂S, and (CH₃)₂S₂ using a celite-filled column. The reproducibility of the retention time measurements was at a 3% relative standard deviation level, and the correlation coefficient (R²) for the VSC concentration was greater than 0.99. In addition, the chromatograms of single and mixed gases were almost identical.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.4
• /
• pp.365-371
• /
• 2015

The rare earth element(REE)s play an important role in understanding of rock formation and evolution because of their similar geochemical behaviors. Sm and Nd are more useful than other REEs because Sm-Nd isotopic system has important applications for geochemical interpretation like age dating and crustal evolution. These studies require a chromatographic technique for Sm and Nd separation from the geological samples. Ln-resin method using 0.25 M HCl as the eluent is widely used for Nd separation. However, this technique has a disadvantage of the poor elemental selectivity that the Nd fraction contains Ce as a tailing of the previous fraction. This technical report is a comparison study on the effect of eluent concentration between 0.25 M HCl and 0.15 M HCl on the separation of Nd with Ln-resin method for improving the technique of Nd separation. The results showed that the separation of Ce and Nd using 0.15M HCl as the eluent was not effective compared to the separation using 0.25 M HCl. In this experiment, we could confirm that the dilution of eluent might not be effective on the high purity separation of Nd with Ln-resin method.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.8
• /
• pp.77-85
• /
• 2019

In this paper, we propose a "Safe Web Using Scrapable Headless Browse" Because in a network separation environment for security, It does not allow the Internet. The reason is to physically block malicious code. Many accidents occurred, including the 3.20 hacking incident, personal information leakage at credit card companies, and the leakage of personal information at "Interpark"(Internet shopping mall). As a result, the separation of the network separate the Internet network from the internal network, that was made mandatory for public institutions, and the policy-introduction institution for network separation was expanded to the government, local governments and the financial sector. In terms of information security, network separation is an effective defense system. Because building a network that is not attacked from the outside, internal information can be kept safe. therefore, "the separation of the network" is inefficient. because it is important to use the Internet's information to search for it and to use it as data directly inside. Using a capture method using a Headless Web browser can solve these conflicting problems. We would like to suggest a way to protect both safety and efficiency.

• Structural Engineering and Mechanics
• /
• v.78 no.3
• /
• pp.369-378
• /
• 2021

This paper reviewed a few output-only system identification algorithms and identified the shortcomings of those popular blind source separation methods. To address the issues such as less sensors than the targeted modal modes (under-determinate problem), repeated natural frequencies as well as systems with complex mode shapes, this paper proposed a complex wavelet modified second order blind identification method (CWMSOBI) by transforming the time domain problem into time-frequency domain. The wavelet coefficients with different dominant frequencies can be used to address the under-determinate problem, while complex mode shapes are addressed by introducing the complex wavelet transformation. Numerical simulations with both high and low signal-to-noise ratios validate that CWMSOBI can overcome the above-mentioned issues while obtaining more accurate identified results than other blind identification methods.