• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.9-14
• /
• 2009

A variety of Certification systems are initiated, as increased demands for housing quality of building & house owner. New building and apartment built in Seoul metropolitan should acquire Building Energy Rating System and Housing Performance Grade indication System, Green Building Certification System. Building Energy Rating System could be acquired through the certification from energy performance index of environment grade in Housing Performance Grade Indication. Between Housing Performance Grade Indication and Green Building Certification System, There are troublesome to acquire certification because a lot of assessment items are overlapped. At a result, the rational and efficient certification system should be initiated not only to avoid overlap among those certification systems and promote Green Building market share but also efficient certification system operation. We will discuss on assessment items between Housing Performance Grade Indication System and Green Building Certification System and release the improvement method those Certification Systems to avoid overlapping to assessment items.

• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.4
• /
• pp.371-378
• /
• 2011

In this paper, the wavelet denoising techniques using thresholding method are applied to the low cost micro electromechanical system (MEMS)-global positioning system(GPS) integrated system. This was done to improve the navigation performance. The low cost MEMS signals can be distorted with conventional pre-filtering method such as low-pass filtering method. However, wavelet denoising techniques using thresholding method do not distort the rapidly-changing signals. They can reduce the signal noise. This paper verified the improvement of the navigation performance compared to the conventional pre-filtering by simulation and experiment.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.9
• /
• pp.713-718
• /
• 2015

The purpose of this study is to realize compressor-performance improvements in the fuel economy of an automotive air-conditioning system. We conduct cooling performance tests in a compressor calorimeter test stand. To improve the cooling performance, we investigate the increase in the suction flow rate and the decrease in the discharge dead volume. Based on the results of the test, we found that the cooling capacity and the coefficient of performance (COP) of the compressors were improved as follows. The cooling performance improved greater at high speeds than low speeds in the case of an increase in the suction flow rate increase, and it improved more at low speeds than at high speed when there was a decrease in the discharge dead volume. When both of the above factors were included, we observed that the improvement effects were generally balanced for both high- and low-speed modes, and there was a significant improvement in the discharge temperature. The improvement was found to be about 3.2% at low speed, 8.3% at high speed during in cooling performance improvement, about 5.8% at low speed and about 6.2% at high speed in COP improvement, and there was a decrease of about $3^{\circ}C$ at low speed and a $5^{\circ}C$ decrease at high speed in discharge temperature.

• Plant Journal
• /
• v.17 no.1
• /
• pp.58-66
• /
• 2021

The government has recently come up with a policy to tighten regulations on air pollutant emissions due to public concerns over the emission of pollutants such as fine dust. The coal-fired power plant is speeding up the improvement of the performance of environmental facilities, and this paper deals with the cases of performance improvement by adding a catalyst to the 500 MW standard coal-fired power DeNox system, and examines the change in the performance factors according to the addition of catalysts and the efficiency of NOx removal. The DeNOx efficiency before and after improvement increased from 80% to 88%, and the conversion rate of SO2/SO3, ammonia slip which are performance factors satisfied the design assurance value, but exceeded the design assurance value for differential pressure. At the same time, the ammonia slip concentration and differential pressure items increased as the NOx removal efficiency increased, resulting in the need for management and improvement.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.66
• /
• pp.47-57
• /
• 2001

This thesis introduce the organization system and office regulation of standardization administrative organization for the change of times, also suggest improvement plan for its effective management. The main improvement plan refer to the standardization administrative organization\`s work, this thesis suggest, 1. Readjustment of national standardization system and effective reorganization for standards information organization. 2. For industrial standards system, the korea industrial standards should be maintained uniform system, So decentralized korea industrial standard at government ,must be unified and maintained to unique policy for its effective improvement. 3. To strengthen with international standards organization, a institutional device, budget funds, and expert should be backed up. 4. For training and education of expert, Refer to the performance of one\`s duty, the proper expert should be chosen and posted. Also, systematic training and education system for expert must be developed, So they can be on duty continuously, Finally, this thesis suggest that the necessity of systematic and unique policy must be established for high position at international area. Since the limitation of data, the future research will be performed for budget funds and personnel setup.

• The Journal of Information Systems
• /
• v.10 no.2
• /
• pp.129-150
• /
• 2001

In this study, we model a decentralized supply chain system which is managed by four types of centers, sequentially located: Retailer, Wholesaler, Distributor, and Factory Each center contributes to enhancing the performance of the supply chain system individually with its own local inventory information. Through experiments which are performed with a programmed simulation (like the MIT beer game), we investigate how the information lead time improvement in each center affects the whole system. And we show that the impact of the lead time improvement in the downstream, like retailers, affects more to the system than the one in the upstream, like factories, in a cost-effective way. Moreover, by using information lead time for each center, we analyze how much the extent of the improvement affects the whole system, especially for the total cost and the order level.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.2
• /
• pp.98-107
• /
• 2002

The performance of a capacity controlled system, which are tandem, pole change, bypass and inverter driven compressor, has been compared with that of a con- ventional constant speed system. It has been found that capacity modulated system can offer more than 14 percent improvement in SEER over the conventional system. Comparative test results show that two compressor system can attain an improvement in SEER up to 42% over the conventional on/off system, and is feasible without additional investment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.638-643
• /
• 2013

Chaos communication system has a sensitive characteristic to initial conditions, because completely another signal is generated when initial condition of chaos equation is changed subtly. Also, chaos communication systems have the characteristics of non-periodic, non-predictability, the broadband signal, such as ease of implementation. Due to these characteristics, security of chaos communication system generally is evaluated better than other systems. However, BER(Bit Error Rate) performance is evaluated worse than other digital system, because existing chaos communication system's transmitter and receiver are strong influence by interference signal and noise. So, research to improve the BER performance of the chaotic communication system is performed continuously. In this paper, We will propose a new CDSK(Correlation Delay Shift Keying) receiver for BER performance improvement. After we compare to the performance of existing CDSK receiver and proposed CDSK receiver, BER performance of proposed CDSK receiver evaluate. Also, when using the new CDSK receiver, we evaluate the BER performance according to the spreading factors and find an optimum spreading factor. If chaos communication system use a new CDSK receiver, BER performance is improved than existing CDSK receiver. Also, if spreading factor's value is increased, BER performance is improved, because it is not nearly affected by interference signal and noise.

• Journal of Internet Computing and Services
• /
• v.11 no.5
• /
• pp.119-126
• /
• 2010

In this paper, we analyze the robustness of transformed-key asymmetric watermarking system and show its improvement by proposing a new detection method. Based on the assumption that the transformed-key asymmetric watermarking system is under the threat of subtraction attack, we first propose the criterion for the detection performance of the watermarking system and analyze the optimum condition on the system. Next, a new detection method is proposed to improve the detection performance of the system based on the criterion. The proposed improvement makes the system robust to not only subtraction attack but also Wu's attack.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.11
• /
• pp.275-280
• /
• 2018

The choice of a suitable distributed file system is required for loading large data and high-speed processing through subsequent applications in a cloud environment. In this paper, we propose a write performance improvement method based on GlusterFS and evaluate the performance of MapRFS, CephFS and GlusterFS among existing distributed file systems in cloud environment. The write performance improvement method proposed in this paper enhances the response time by changing the synchronization level used by the synchronous replication method from disk to memory. Experimental results show that the distributed file system to which the proposed method is applied is superior to other distributed file systems in the case of sequential write, random write and random read.