• Transactions of the Society of Information Storage Systems
• /
• v.2 no.1
• /
• pp.21-25
• /
• 2006

The new multimedia information environment requires smaller optical data storage systems. However, one of the difficulties encountered in designing small form factor(SFF) optical pick-up is to emit the heat which is generated from laser diode(LD). Heat generated at the LD can reduce the optical performance of the system and the lifetime of LD. Therefore, it is important to include the thermal design in the design stage of SFF optical pick-up system for high performance and the longer lifetime of LD, and furthermore, to analyze the thermal characteristics of LD in detail micro heat transfer analysis is necessary. In the present study, micro heat transfer analysis was performed using the finite element method for the $28{\times}11{\times}2mm^3$ super slim swing-arm type optical pick-up actuator for Blu-ray disk. Two different materials were used for a swing-arm; a double layer polycarbonate/steel structure and a single aluminum structure.

• International Journal of Reliability and Applications
• /
• v.9 no.2
• /
• pp.167-182
• /
• 2008

The objective of this paper is to discuss the stochastic analysis and the statistical inference of a three-states semi-Markov reliability model. Using the maximum likelihood procedure, the parameters included in this model are estimated. Based on the assumption that the lifetime and repair time of the system are gener-alized Weibull random variables, the reliability function of this system is obtained. Then, the distribution of the first passage time of this system is derived. Many important special cases are discussed. Finally, the obtained results are compared with those available in the literature.

• Communications for Statistical Applications and Methods
• /
• v.19 no.2
• /
• pp.219-224
• /
• 2012

This article considers the mean time to failure(MTTF) of a dependent parallel system. We study how the degree of dependency components influences the increase in the mean lifetime for this system. The results are illustrated by tables and figures.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.54-60
• /
• 2011

The development of wireless sensor networks (WSN) can be motivated by several types of applications. However, these applications demand an energy-efficient WSN that can prolong the network lifetime and can provide high throughput, low latency and delay. Designing wireless sensor networks with the capability of prolonging network lifetime catch the attention of many researchers in wireless system and network field. Contrasts with Mobile Ad Hoc Network system, Wireless Sensor Networks designs focused more on survivability of each node in the network instead of maximizing data throughput or minimizing end-to-end delay. In this paper, we will study part of data link layer in Open Systems Interconnection (OSI) model, called medium access control (MAC) layer. Since the MAC development of energy aware MAC Protocol for wireless sensor layer controls the physical radio part, it has a large impact on the overall energy consumption and the lifetime of a node. This paper proposes a analytical approach that tries to reduce idle energy consumption, and shows the increasement of network end-to-end arrival rate due to efficiency in energy consumption from time slot management.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.2
• /
• pp.29-34
• /
• 2008

In this paper, we proposed a system protocol for detecting injurious insect to support energy saving transmission in wireless bio sensor networks. The main ideas and features of the system are as follows. First, the route establishment method which is based on the energy efficiency and stability by using time-division tree structure. Second, multi-hop direction-based data gatering structure. In this structure, the selected fading method is used to transmit packet via the established tree structure for supporting power saving and route lifetime efficiently. Finally, we can get the node power saving and reduce transmission delay, thus network lifetime and efficiency are improved. The performance evaluation of the proposed protocol is via OPNET(Optimized Network Engineering Tool).

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.6
• /
• pp.21-27
• /
• 2009

As portable electronic systems being used more often, it becomes a more important issue to lengthen the lifetime of the power battery of the system, for instance, by developing batteries of a higher efficiency. A simple as well as practical method to lengthen the lifetime is to use multiple batteries that are connected in parallel. But in this paper we present a new idea in using multiple batteries, with which the residual energy of the battery can be used in the sense of recycling. The idea is based on a usual phenomenon that a battery cell that has been used until its voltage has dropped below a reference level may still have some residual energy, due to which the voltage can recover when the cell takes a rest for a while. As a practical realization scheme of this idea, a multi-cell configuration method with a cell selection switch is introduced, and its feasibility has been examined by performing experimental observations on the behavior of battery discharge. It has been found that the lifetime of an Alkaline primary battery cell can be lengthened approximately by one or two hours with the proposed method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.857-872
• /
• 2014

Recent researches reveal that great benefit can be achieved for data gathering in wireless sensor networks (WSNs) by employing mobile data collectors. In order to balance the energy consumption at sensor nodes and prolong the network lifetime, a multi-track large-scale mobile data collection mechanism (MTDCM) is proposed in this paper. MTDCM is composed of two phases: the Energy-balance Phase and the Data Collection Phase. In this mechanism, the energy-balance trajectories, the sleep-wakeup strategy and the data collection algorithm are determined. Theoretical analysis and performance simulations indicate that MTDCM is an energy efficient mechanism. It has prominent features on balancing the energy consumption and prolonging the network lifetime.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.9
• /
• pp.56-61
• /
• 2011

The temperature of power transformers is very important factor for power system operation in substation because load capacity and limited lifetime of power transformers are determined by winding temperature. Also, The temperature of power transformers varies with the structure, capacity, operation condition and manufacturers. Thus, it is necessary for temperature distribution to be exactly investigated because of efficient load management and prediction of limited lifetime. Nevertheless, there was no case of analysis as well as measurement of the temperature of power transformers. In this paper, we manufactured the 154kV standard power transformer for the test. And we measured the temperature by the heat run test and analyzed the temperature distribution of transformer.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.3
• /
• pp.575-580
• /
• 2010

This paper is to design an optimum power conversion device for the system required for development of a low cost 3-phase power inverter. For this purpose, in order to meet with endurance required by the industry, failure mode is standardized to guarantee lifetime of a power semiconductor by monitoring real time power loss and to facilitate failure mode analysis. As normality of heat loss of a power semiconductor is identified remaining in a certain range by comparing heat rise slope between that is calculated by using average current or average loss and that is measured at a heat sink, its feasibility is confirmed by experiment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6081-6088
• /
• 2012

An unequal clustering method in wireless sensor networks is the technique that forms the cluster of different size. This method decreases whole energy consumption by solving the hot spot problem. In this paper, I propose a layer-based dynamic unequal clustering using the unequal clustering model. This method decreases whole energy consumption and maintain that equally using optimal cluster's number and cluster head position. I also show that proposed method is better than previous clustering method at the point of network lifetime.