• 제목/요약/키워드: synthetic temperature

검색결과 807건 처리시간 0.022초

Decolorization of Acid Green 25 by Surface Display of CotA laccase on Bacillus subtilis Spores

  • Park, Jong-Hwa;Kim, Wooil;Lee, Yong-Suk;Kim, June-Hyung
    • Journal of Microbiology and Biotechnology
    • /
    • 제29권9호
    • /
    • pp.1383-1390
    • /
    • 2019
  • In this study, we expressed cotA laccase from Bacillus subtilis on the surface of B. subtilis spores for efficient decolorization of synthetic dyes. The cotE, cotG, and cotY genes were used as anchoring motifs for efficient spore surface display of cotA laccase. Moreover, a $His_6$ tag was inserted at the C-terminal end of cotA for the immunological detection of the expressed fusion protein. Appropriate expression of the CotE-CotA (74 kDa), CotG-CotA (76 kDa), and CotY-CotA (73 kDa) fusion proteins was confirmed by western blot. We verified the surface expression of each fusion protein on B. subtilis spore by flow cytometry. The decoloration rates of Acid Green 25 (anthraquinone dye) for the recombinant DB104 (pSDJH-EA), DB104 (pSDJH-GA), DB104 (pSDJH-YA), and the control DB104 spores were 48.75%, 16.12%, 21.10%, and 9.96%, respectively. DB104 (pSDJH-EA) showed the highest decolorization of Acid Green 25 and was subsequently tested on other synthetic dyes with different structures. The decolorization rates of the DB104 (pSDJH-EA) spore for Acid Red 18 (azo dye) and indigo carmine (indigo dye) were 18.58% and 43.20%, respectively. The optimum temperature for the decolorization of Acid Green 25 by the DB104 (pSDJH-EA) spore was found to be $50^{\circ}C$. Upon treatment with known laccase inhibitors, including EDTA, SDS, and $NaN_3$, the decolorization rate of Acid Green 25 by the DB104 (pSDJH-EA) spore decreased by 23%, 80%, and 36%, respectively.

지속가능 에너지 패러다임 변화속에서 석탄의 활용 (Usage of Coal in the Paradigm Shift toward Sustainable Energy)

  • 박제현;양인재;이진수;이청룡
    • 자원환경지질
    • /
    • 제53권6호
    • /
    • pp.793-807
    • /
    • 2020
  • 그린뉴딜정책의 실현은 석탄을 연료에서 원료로 활용분야로의 전환을 촉진시킬 것이다. 석탄은 수소의 생산, 인조 흑연 및 활성탄의 제조 원료로 활용될 수 있다. 석탄은 Steam carbon(SC) 반응과 Water-Gas Shift(WGS) 반응 및 탄산화 반응을 통하여 수소를 생산할 수 있으며, CO2격리기술과 연동되어 사용되어야 한다. 인조흑연은 실리콘이나 철 등의 무기촉매의 존재하에서 탄화도가 높은 무연탄 등을 2400~2800℃의 흑연화 온도까지 열처리함으로서 제조될 수 있기 때문에 무연탄은 석유계 피치에 비해 원료 가격경쟁력 측면에서 잠재성이 있다. 한편, 최근 목질기원의 활성탄에 필적하는 넓은 비표면적 혹은 많은 양의 미세기공을 가진 석탄기원의 활성탄이 제조될 수 있음을 여러 연구를 통해 확인되었다. 따라서 석탄기원의 활성탄은 목질기원의 활성탄을 대체할 수 있을 것으로 기대된다.

스테인리스강관을 이용한 감람석 합성 (Olivine Synthesis Using Stainless Steel Tube)

  • 정기영
    • 광물과 암석
    • /
    • 제36권4호
    • /
    • pp.337-343
    • /
    • 2023
  • 감람석은 철감람석과 마그네슘감람석의 완전고용체로서 암석형 행성, 운석, 소행성, 행성간 먼지 등에 풍부하게 함유되어 있다. 감람석은 조성범위가 매우 넓기 때문에 감람석 함유 시료의 광물정량분석을 위해서는 다양한 조성의 감람석 표준물질을 구비해야 한다. 감람석 표준물질을 전기로와 스테인리스강관을 이용하여 1000~1100 ℃ 범위의 온도에서 합성하였다. 엑스선회절분석에 의하면 시료에 따라 합성불순물과 미반응물이 있으나 전반적으로 전조성 범위를 포함하는 감람석이 합성되었다. 합성 감람석들은 출발물질의 철감람석 몰비에 비례하여 단위포 치수가 선형으로 증가하는 경향을 보였으며, 회절강도도 자연산 감람석과 부합하였다. 그러나 철 함량이 높은 합성 감람석에서 불순물 함량이 증가하는 경향이 있어 아직 모든 합성 감람석을 표준물질로 사용할 수 없으며, 출발물질의 고순도화, 반응시간 및 온도 조절 등의 합성과정 개선이 필요하다.

은나노를 이용한 비팽윤성 운모의 수열적인 표면개질 및 특성평가 (Characterization and hydrothermal surface modification of non-swelling property mica using nano silver)

  • 석정원;박라영;김판채
    • 한국결정성장학회지
    • /
    • 제17권4호
    • /
    • pp.172-178
    • /
    • 2007
  • 수평회전식 수열법에 의해 운모 분말을 합성하였다. 수열조건은 출발원료로 $K_2O,\;Al(OH)_3$ 그리고 $SiO_2$의 비는 1 : 3 : 3mol%로 하고 수열용매로 8mol%의 KOH를 함께 추가하여 $260^{\circ}C$에서 72시간 동안 반응시켰다. 합성한 분말은 수직형 수열처리법에 의한 은나노 코팅 운모 제조를 위해 사용하였다. 은나노 코팅의 처리를 위한 수열조건은 출발원료로 합성한 분말로 하고, 수열용매로 $0.5{\ell}$ 3차 증류수, 그리고 1,000ppm의 은나노 졸을 코팅원료로 사용하여 $160{\sim}260^{\circ}C$ 범위에서 72시간 동안 반응시켰다. 처리 후 결정구조, 은나노 코팅 여부 및 코팅된 운모의 특성은 XRD, SEM, TEH-EDX 및 shake plask법을 통해 분석하였다.

다양한 열-수리-역학적 조건 하에서 불연속면 전단 거동 특성에 관한 실험적 연구 (A Study on Shear Characteristics of a Rock Discontinuity under Various Thermal, Hydraulic and Mechanical Conditions)

  • 김태현;전석원
    • 터널과지하공간
    • /
    • 제26권2호
    • /
    • pp.68-86
    • /
    • 2016
  • 암반 구조물의 안정성을 분석하기 위해서는 암반 내 존재하는 불연속면의 전단거동 특성을 파악하는 것이 필수적이다. 특히 심부 지하에서의 암석 불연속면 마찰 거동 특성은 역학적, 수리적, 열적 및 화학적 조건과 각각의 조건들의 상호작용에 의해 영향을 받게 된다. 본 연구에서는 다양한 열-수리-역학적 조건에서 불연속면의 전단 거동 특성을 파악하기 위해 매끈한 화강암 불연속면 시험편과 거칠기를 포함한 유사암석 불연속면 시험편을 대상으로 삼축압축장비를 이용한 전단실험을 수행하였다. Coulomb의 전단강도 예측식을 이용하여 실험결과를 분석한 바 화강암 시험편의 경우 실험 조건의 변화에 따라 마찰 거동에 큰 변화를 보이지 않았으나 유사암석 시험편의 경우 응력 수준에 따라 변화를 보였다. 실험 조건의 변화에 따른 강성 및 팽창각의 변화를 분석한 결과 온도 및 수압 조건의 변화에 따라서 크게 변화하지 않음을 알 수 있었다.

합성토지피복자료와 고해상도 중규모 모형을 이용한 시화호 지역의 토지이용 변화에 따른 주변 기상장 변화 연구 (A Study on Changes in Local Meteorological Fields due to a Change in Land Use in the Lake Shihwa Region Using Synthetic Land Cover Data and High-Resolution Mesoscale Model)

  • 박선기;김지희
    • 대기
    • /
    • 제21권4호
    • /
    • pp.405-414
    • /
    • 2011
  • In this study, the influence of a change in land use on the local weather fields is investigated around the Lake Shihwa area using synthetic land cover data and a high-resolution mesoscale model - the Weather Research and Forecasting (WRF). The default land cover data generally used in the WRF is based on the land use category of the United States Geological Survey (USGS), which erroneously presents most land areas of the Korean Peninsula as savannas. To revise such a fault, a multi-temporal land cover data, provided by the Ministry of Environment of Korea, was employed to generate a land cover map of 2005 subject to the land use in Korea at that time. A new land cover map of 1989, before the construction of the Lake Shihwa, was made based on the 2005 map and the Landsat 4-5 TM satellite images of two years. Over the areas where the land use had been changed (e.g., from sea to wetlands, towns, etc.) due to the Lake Shihwa development project, the skin temperature decreased by up to $8^{\circ}C$ in the winter case while increased by as much as $14^{\circ}C$ in the summer case. Changes in the water vapor mixing ratio were mostly affected by advection and topography in both seasons, with considerable increase in the summer case due to continuous sea breeze. Local decrease in water vapor occurred over high land use change areas and/or over downstream of such areas where alteration in wind fields were induced by changes in skin temperature and surface roughness at the areas of land use changes. The albedo increased by about 0.1% in the regions where sea was converted into wetland. In the regions where urban areas were developed, such as Songdo New Town and Incheon International Airport, the albedo increased by up to 0.16%.

Antibiosis of Pediocin-Producing Pediococcus sp. KCA1303-10 Against Listeria monocytogenes in Mixed Cultures

  • Ahn, Cheol;Kim, Chung-Hoi;Shin, Hyun-Kyung;Lee, Young-Min;Lee, Yeon-Sook;Ji, Geun-Eog
    • Journal of Microbiology and Biotechnology
    • /
    • 제13권3호
    • /
    • pp.429-436
    • /
    • 2003
  • Pediocin K1 is a bacteriocin produced by Pediococcus sp. KCA 1303-10, isolated from traditionally fermented flatfish in Korea. Pediocin K1-dependent antibiosis and pediocin K1-independent antibiosis against Listeria monocyrogenes were investigated by comparing antibiosis potential of the ped+ wild-type strain of Pediococcus sp. KCA1303-10 with that of the ped- mutant strain in 3 different media at 3 different temperatures. In the synthetic MRS-APT medium, bacteriocin (pediocin K1)-dependent antibiosis (BDA) acted as the major driving force of overall antibiosis at the initial stage before the pH of the media was not sufficiently lowered, while bacteriocin-independent antibiosis (BIA) took over the major role at the late stage of antibiosis by killing otherwise resistant cells in the modium. The role of BDA increased as the temperature of the system decreased. The antibiosis potential of BDA among the overall antibiosis of Pediococcus against Listeria at $37^{\circ}C$ was calculated as 46%, and as 75% at $25^{\circ}C$. In the skim milk medium, antibiosis of Pediococcus against Listeria was weakened more than 4 log cycles compared to that of the synthetic medium; however, BDA worked as the main antibiosis force regardless of the culturing temperature in the skim milk medium. In the bean soup medium, BDA also worked as the major killing mechanism against Listeria, but BIA played as another suppressing mechanism against otherwise pediocin-resistant Listeria population. These results suggest that a large portion of the inhibitory action of the ped+Pediococcus sp. KCA1303-10 was attributable to the bacteriocin produced by the strain and that viable Pediococcus sp. KCA1303-10 was superior to the purified bacteriocin in suppressing the occurrence of the bacteriocin-resistant Listeria monocytogenes in food systems.

PVA를 이용한 Solution-Polymerzation 합성법에 의한 Mullite, Cordierite 세라믹스의 합성 (A Synthesis of Mullite and Cordierite Ceramics by Solution-Polymerzation Route Based on PVA)

  • 이용석;이병하
    • 한국세라믹학회지
    • /
    • 제41권2호
    • /
    • pp.151-157
    • /
    • 2004
  • 안정한 산화물 세라믹스 재료로서 mullite와 cordierite는 우수한 열적, 화학적 특성 때문에 구조재료에서부터 전자재료에 이르는 폭넓은 용도에 사용되어지고 있다. 그럼에도 불구하고, mullite는 천연에서는 산출되지 않기 때문에 합성에 의해서만 제조되고 있다. 또한, cordierite는 합성온도폭이 좁아 고순도의 미립 분말을 제조하기 어려운 재료이다. Mullite 역시 고상반응법 등의 합성법으로는 균질한 재료로의 합성이 어렵다. 그렇기 때문에 sol-gel법 등의 다양한 합성법에 의해 이들 재료에 관한 연구가 계속되고 있다. 본 연구에서는 국내의 원료를 이용하여 sol-gel법에서와 같은 고순도의 미립의 분말을 좀 더 낮은 온도에서 합성이 가능하며, 상대적으로 저가의 원료를 사용함으로서 경제적인 방법인 PVA를 polymer carrier로서 이용한 solution-polymerzation 합성법에 의해 mullite와 cordierite를 합성하였다. 그 결과, mullite, cordierite는 각각 120$0^{\circ}C$, 125$0^{\circ}C$에서 단일의 결정상이 생성되었으며 비표면적 20$m^2$/g 이상의 미립의 분말이 생성됨을 확인할 수 있었다.

아위버섯의 생리적 특성 (The physiological characteristics of Pleurotus Ferulae Lanzi.)

  • 채정기;김대식;서승현;김현석;장경수;윤대령;오득실;차월석;이병래
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2002년도 제9차 국제심포지움 및 추계정기학술발표회
    • /
    • pp.58-58
    • /
    • 2002
  • 아위버섯(Pleurotus Ferulae Lanzi)의 온도별 균사생장도를 조사한 결과, 균사생육온도는 4$^{\circ}C$~35$^{\circ}C$로 나타났으며, 최적 균사생장 온도는 $25^{\circ}C$였고, $25^{\circ}C$~32$^{\circ}C$에서도 비교적 균사생장이 양호하였다. pH별 균사생장도를 조사한 결과는 pH가 4.0, 5.0, 6.0, 7.0, 8.0으로 조절된 MYPA(Yeast Malt Peptone Arar)배지를 기본배지로 하여 균사생장을 조사한 결과, 최적 pH는 6.0이었고, 5.0, 7.0순으로 균사생장이 양호하였던 반면, 4.0에서는 균사생장이 극히 불량하였다. 아위버섯의 균사생장을 위한 최적 배지조성은 탄소원별 균사생장도를 조사한 결과, starch, maltose 첨가구에서 균사생장이 가장 양호하였다. 또한, fructose, glucose, mannitol, lactose, xylose 순으로 균사생장이 비교적 양호하였던 반면, 다른 탄소원에서는 불량하였다. 질소원별 균사 생장량을 조사한 결과 yeast 첨가구에서 균사생장이 가장 양호하였고, 반면, 다른 질소원에서는 불량하였다. 위의 내용을 종합해보면 아위버섯의 최적온도는 25~32$^{\circ}C$, 최적 pH는 5.0~6.0으로 나타났다 또한 적정 영양원은 기본배지로 선발된 MYPA에 탄소원은 starch, maltose, 질소원은 yeast extract을 첨가하는 것이 가장 좋게 나타났다.

  • PDF

잣버섯의 생리적 특성 (The physiological characteristics of Lentinus lepides.)

  • 채정기;서승현;김현석;장경수;최문호;장성희;박병인;차월석;이병래
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2002년도 제9차 국제심포지움 및 추계정기학술발표회
    • /
    • pp.59-59
    • /
    • 2002
  • 잣버섯(Lentinus lepides)의 온도별 균사생장을 조사한 결과, 최적 균사 생장온도는 $25^{\circ}C$였고, 균사생육온도는 4$^{\circ}C$~35$^{\circ}C$로 나타났으며, 22$^{\circ}C$~32$^{\circ}C$에서 대체로 균사생장이 양호하였다. pH가 4.0, 5.0, 6.0, 7.0, 8.0으로 조절된 MYPA(Yeast Malt Peptone Agar)를 기본배지로 하여 균사생장을 조사한 결과 최적 pH는 4.0이었고, 3.0, 5.0 순으로 균사생장이 양호하였던 반면, 다른 처리구에서는 균사생장이 극히 불량하였다. 잣버섯의 균사생장을 위한 최적 배지조성은 탄소원별 균사 생장량을 조사한 결과, maltose의 첨가구에서 균사 생장이 가장 양호하였으며, 또한 xylose, starch, cellobiose, lactose 순으로 균사 생장이 비교적 양호하였던 반면, 다른 탄소원 처리구에서는 불량하였다. 질소원별 균사 생장량을 조사한 결과, peptone을 제외한 다른 질소원 처리구에서는 균사생장이 극히 불량하였다. 위의 내용을 종합해보면 잣버섯의 최적온도는 22~32$^{\circ}C$, 최적 pH는 3.0~4.0으로 나타났다. 또한 적정 영양원은 기본배지로 선발된 MYPA에 탄소원은 maltose, 질소원은 peptone을 첨가하는 것이 가장 좋게 나타났다.

  • PDF