• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.556-559
• /
• 2007

Effects of carbon nanotube (CNT) on the in-plain switching (IPS) and fringe-field switching (FFS) modes were investigated. The studies show that the CNT-doped LC cells exhibit lower transmittance but faster response time than those in the pure LC cell. Interestingly, the CNT-doped IPS and FFS modes show different characteristic in effects of operating voltage.

• Journal of Digital Contents Society
• /
• v.10 no.2
• /
• pp.199-207
• /
• 2009

The Q-switching the shutter or the different optical science element puts in within the laser light resonator and the storehouse departs from the within the resonator it loses the mortar and the reversal distribution which when is sufficient creates from within the active medium, opens the shutter instantaneously and it is to do to be made to emit with the light where the energy which is accumulated within the resonator is strong very. Like this Q-switching of laser resonator--It decreases factor increasing suddenly to make. To method of Laser Q-switching mechanical switching methods, electro-optic switching methods and switching by saturable absorber methods, acousto-optic switching method etc. 4 kind are being used on a large scale. In these people the conversion which is electric in compliance with the effect which is electrooptics is widely being used the Q-switching pulse of short pulse width because being it will be able to create. Consequently, Pockel cell where it has the quality of electrooptics effect) the Q-it is become known that it is suitable it uses with switch. From the research which it sees FET and one-chip microprocessor where it is a switching element and pulse transfomer to plan and produce pockel cell Q-switch driving gears, pulse style Nd: It applied in YAG Laser system and it investigated and researched the operating characteristic of the Q-switch. Also, the Q-switch leads and Nd where it is output: YAG with forecast in compliance with a theoretical calculation it comes to buy laser beam side politics it compared and laser beam qualities which had become Q-switching it analyzed.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.725-726
• /
• 2008

This paper deals with characteristic analysis of Linear Switched Reluctance Motor (LSRM) according to switching condition. When approved current in each phase by decided position, we made sure current and voltage according to turn-on, turn-off. In dynamic simulation of LSRM, through an experiment, we decided turn-on position of inductance profile. Also, we presented dynamic characteristic analysis model which is consisted at motor and sensor signal part, etc., and substitute circuit constant that get using magnetic equivalent circuit method, we confirmed current and voltage waveform.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.8 no.1
• /
• pp.38-42
• /
• 1983

The characteristic of a Tunnel Diode(TD) is approximated by the summation of two exponential terms, obtained from the haracteristic curves displayed on the curve tracer. Using this result, static characteristic of a TD pair was plotted by a computer programming. From these static characteristic curves, the triggering behavior of TC pair multi-vibrators was described graphically. Two stable characteristics were analyzed by piecewise linear Method. Theoritical switching Theoritical switching times of a TD pair flip-flop(F-F) circuits were compared with experimental results.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.701-703
• /
• 1993

This paper describes characteristic analysis of high frequency inverter using zero voltage switching(ZVS) which is one of the methods to reduce switching loss. This study is generally described by introducing normalized control variables. Moreover, many characteristics of analysis results offer importanat data for circuit design. In addition, the result of its characteristic analysis is compared with that from PSpice's simulation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1120-1124
• /
• 2005

We reviewed controllers with a time delay estimation in this paper. Time delay control (TDC) and sliding mode control (SMC) are well known robust control schemes. Basically, the TDC has a main characteristic called a time delay estimation from which we can estimate the total uncertainty of a system. . The TDC causes the stick-slip in the case of systems with a friction. The so-called TDCSA which are short for TDC with switching action was developed to reduce the stick-slip. The TDC has the additional switching action term in the TDC structure. In the other hand, the SMC dose not have a time delay estimation but instead it can estimate the system uncertainty through the switching action. The SMC has a difficulty to estimate the total uncertainty of a system because it does not have a time delay estimation. In order to solve the difficulty, some control schemes were developed. Among them, we need to focus our attention on two control schemes: SMCPE and SMCTE, which are short for sliding mode control with a perturbation estimation and sliding mode control with a time delay estimation, respectively. In this paper, we analyzed and compared the characteristic of above three controllers. Even though the motives for the development of three control schemes are different, three control schemes have much in common in terms of their controller structures.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.320-323
• /
• 2008

In this paper, electro-optical characteristic of Nematic Liquid crystal (LC) with varying temperature in different LCD modes, namely Fringe Field Switching (FFS), In-plane switching (IPS), and Patterned Vertical Alignment (PVA) modes are investigated and compared. Electro optic me asurements suggest that rate of change of transmission with temperature in FFS mode was lowest and much more thermally stable as compared to IPS and PVA m odes. However the electro-optical characteristic of patterned vertical alignment (PVA) mode was most affected by changing temperature. The measured threshold voltage was found to be much more thermally stable in FFS and IPS modes than that of PVA mode.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.2
• /
• pp.114-122
• /
• 2004

This paper presents a novel single-stage active-clamp type high frequency resonant inverter. The proposed topology is integrated full-bridge boost rectifier as power factor corrector and active-clamp type high frequency resonant inverter into a single-stage. The input stage of the full-bridge boost rectifier works in discontinuous conduction mode(DCM) with constant duty cycle and variable switching frequency. So that a boost converter makes the line current follow naturally the sinusoidal line voltage waveform. By adding additional active-clamp circuit to conventional class-E high frequency resonant inverter, main switch of inverter part operates not only at Zero-Voltage-Switching mode but also reduces the switching voltage stress of main switch. Simulation results have demonstrated the feasibility of the proposed high frequency resonant inverter. Characteristics values based on characteristics estimation through circuit analysis is given as basis data in design procedure. Also, experimental results are presented to verify theoretical discussion. This proposed inverter will be able to be practically used as a power supply in the fields of induction heating applications, fluorescent lamp and DC-DC converter etc.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.1
• /
• pp.86-93
• /
• 2003

This paper describes that the resonant tank type DC-DC converter consist of reactor and capacitor resonant tank circuit for increased the output current. This circuit configuration is composed of the resonant tank circuit used resonant capacitor and reactor and the capacitor connected in switch are a common using by resonance capacitor and ZVS(Zero Voltage Switching) capacitor. Therefore, the proposed converter can reduce a switching losses, noise, and voltage stress at turn-on and turn-on and has an advantage which is able to operating safely in load short, because DC reactor is connected with resonance reactor in order to supply a fixed current with low ripple from DC power supply. The analysis of proposed circuit uses normalized parameters and characteristic estimation is generally described the proposed circuit with the characteristics of power and output voltage etc. Also, design is based on the characteristic estmations in each step. Hence, We conform a rightfulness theoretical analysis by comparing a theoretical values and experimental values obtained from experiment.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.116-123
• /
• 1997

This paper was described about principle and form of proposed circuit made use of soft switching technology ZVS(Zero Voltages Switching) and ZCS(Zero Current Switching) to reduce turn on and off loss at switching. Also, the analysis of the proposed circuit is described generally by using normalized parameter and basic operating principle and driving characteristics have been evaluated as to switching frequency and load p arameter. Based on the characteristics value, a method of circuit design is proposed. In addition, Pspice's simulation and experimental waveforms are compared with theoretical ones. The experimental results shows that the proposed Inverter can be used practically such as power source system for induction cooker etc.