• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.393-398
• /
• 2014

A highly efficient dual-mode linear CMOS stacked-FET power amplifier (PA) is implemented for 3G UMTS and 4G LTE handset applications. High efficiency is achieved at a backed-off output power ($P_{out}$) below 12 dBm by employing an active-bypass amplifier, which consumes very low quiescent current and has high load-impedance. The output paths between high- and low-power modes of the PA are effectively isolated by using a bypass switch, thus no RF performance degradation occurs at high-power mode operation. The fabricated 900 MHz CMOS PA using a silicon-on-insulator (SOI) CMOS process operates with an idle current of 5.5 mA and shows power-added efficiency (PAE) of 20.5%/43.5% at $P_{out}$ = 12.4 / 28.2 dBm while maintaining an adjacent channel leakage ratio (ACLR) better than -39 dBc, using the 3GPP uplink W-CDMA signal. The PA also exhibits PAE of 35.1% and $ACLR_{E-UTRA}$ of -33 dBc at $P_{out}$ = 26.5 dBm, using the 20 MHz bandwidth 16-QAM LTE signal.

• Journal of Korea Game Society
• /
• v.17 no.3
• /
• pp.93-106
• /
• 2017

This study explains motivation and purpose of adolescents' game use based on Adler's individual psychology. Through in-depth interviews, it was found that the game is a field to reveal their need for approval in the social community and a means of expressing the attitude toward their life. In addition, need for approval shows a difference in adaptive/maladaptive attitude according to the social interest. This means that the role of peers, parents, and society is important in order for an individual's need for approval to produce social adaptive outcomes. It is necessary to acknowledge the game as an important area of self-actualization in which an adolescent is internalizing social interest and recognizing their self and it is required to switch from an attitude of exclusion, disdain and ignorance to an attitude of openness and tolerance and adaptive intervention.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.68-72
• /
• 2004

A practical method to investigate the user interface of web based Flexible Manufacturing System(FMS) on the internet environment is established. Because the industrial FMS controller requires a lot of gadget, such as switch, dial, button, etc., for actual work-site flexible operation sufficiently, the user interface of the controller is significantly complex. The support for operational convenience of FMS controller can increase productivity and efficiency of the user, operational personnel of FMS. While most FMS provide their application programming interface(API) and graphical user interface(GUI) with adequate mechanism itself when used in stand alone, there is increasing demand for FMS that can operate with the intuitional user interface find virtual reality(V/R) environment. This thesis considers the intuitional user interface of Web-based FMS first, and from this, goes a step further, improves as virtual reality environment of FMS on the internet environments by using the feature based modeling technique approach and cartoon rendering. The feature-based modeling technique approach is applied to FMS line which is consist of facilities such as machining center, CNC lathe, autonomous guided vehicle, rail guided vehicle, and various controllers. In this study, the FMS established the intuitional user interface is able to obtain not only the operational convenience but also the enough productivity and significant efficiency.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.4
• /
• pp.295-300
• /
• 2016

Internet of things which helps communication between human and thing and between things by connecting networks on them is developing. Develops of Internet of things, network technique, and smart machine result interest on home network system. In this paper, we suggested a system with the home network to the dormitory using pressure sensors, infrared sensor, ultrasonic sensor, switch, arduino, raspberrypi, android application. Smart dormitory system based on the internet of things provide information whether public things in dormitory like laundry machine, computer, treadmill is being used now, and package is arrived through android application.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.10 s.340
• /
• pp.9-16
• /
• 2005

The growth of the Internet over the last several years has placed a tremendous strain on the high bandwidth Hence, the amount of internet traffic has risen sharply and it has demanded to use the limited resource. MPLS (Multiprotocol Label Switching) is regarded as a core technology for migrating to the next generation Internet. It is important to reduce the number of labels and LSP(Label Switched Path)s for network resource management. In this thesis, we considered an MPLS multicast mechanism in the current Internet. The scalability problem due to lack of labels and multicast property is one of the serious problems in MPLS multicast mechanism, we proposed a Label Aggregation algorithm that the multicast packets on same link in MPLS allocates the same label for the scalability problem. In order to support the proposed algorithm we defined a new LDP(Label Distribution Protocol) multicast field and multicast packet is copied and transmitted for multicast group links of next node in LSR(label Switch Router).

• Physical Therapy Korea
• /
• v.9 no.4
• /
• pp.1-11
• /
• 2002

본 연구의 목적은 이중과업 방법론(dual task methology)을 사용해서 젊은 사람과 노인을 대상으로 독립된 두 사건(two separate concurrent events)을 동시에 수행하는데 요구되는 주의력에 대한 분석과 노인에서의 특징적 차이를 찾는 것이다. 본 실험은 대상자가 힘판(force plate) 위에서 장애물(10cm) 보행시에 경피자극(cutaneous stimulation)에 대하여 마이크로 스위치(micro-switch)를 사용하여 반응하면서 시행되었다. 힘판과 시간(temporal events) 그리고 반응시간(reaction time)에 관한 자료들은 1000 Hz의 주파수로 수집되었다. 반응시간은 대상자들이 서 있는 상태(baseline) 장애물 보행시(dual task)에서 수집되었다. 반응시간은 아중과업 조건에서 대상자 모두에게서 긴 것으로 나타났으며 특히 노인에서 정상 성인보다 반응시간이 긴 것으로 나타났다. 이중과업 조건 하에서 노인 대상자가 정상 성인에 비해 발가락이 장애물에 닫지 않고 통과할 수 있는 공간, 즉 토우 클리어런스( toe-clearance)와 슬관전 굴곡(knee flexion) 각도가 훨씬 큰 것으로 나타났다. 이중과업 조건하에서 모든 대상자가 족관절 배측굴곡(ankle dorsiflexion) 각도를 감소시키는 것으로 나타났다. 노인들은 젊은 대상자들보다 훨씬 더 긴(124 ms) 유각시간을 보여 주었으며 정상 장애물 보행시 유각 시간은 이중과업보다 50 ms 긴 것으로 나타났다. 이러한 보행 특성의 차이는 노인대상자들이 젊은 대상자들보다 장애물 보행시에 이중과업의 영향을 더 받았기 때문인 것으로 판단된다. 이중 과업 시행시 이러한 토우 클리어런스의 감소와 장애물 통과시에 보행 속도의 증가는 아마도 낙상의 가능성을 증가시키는 요인이 될 수 있는 것으로 보여진다. 본 연구의 결과는 다중과업(multitasks)을 필요로 하는 보행 훈련 프로그램(gait training program)의 개발과 시행에 있어서 기초적인 자료를 제공할 수 있는 것으로 보여진다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.4
• /
• pp.65-72
• /
• 2000

This paper proposes a Push type High Frequency DC-DC Converter using Zero Voltage Switching to reduce turn on and off loss at the switching instants. This paper has a advantage which is able to operating safely in load short, because DC reactor is connected with resonance reactor in order to supply a fixed safely in load short, because DC reactor is connected with resonance reactor in order to supply a fixed current with low ripple from DC power supply. The capacitor $(C_1, C_2)$ connected in switch are a common using as resonance capacitor and ZVS capacitor. The analysis of the proposed high frequency resonance DC-DC converter is generally described by using normallized parameter, and we has evaluated characteristic values which is needed to design a circuit. We conform a rightfulness of theoritical analysis by comparing a theoretical values and experimental values obtained from experiment using MOSFET as switching devices.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.798-802
• /
• 2013

In a conventional DC power supply used for CO2 laser, the circuit elements such as a rectifier bridge, a current-limiting resistor, a high voltage switch, energy storage capacitors ans a high-voltage isolation transformer using high turn ratio are necessary. Consequently, those supplies are expensive and require a large space. Thus, laser resonator and power supply should be optimally designed. In this paper, we propose a new power supply using high frequency resonance phenomena for CW(Continuous wave) CO2 laser (maximum output of 23W with discharge length of 450mm). It consists of a transformer including leakage inductance, magnetizing inductance and half-bridge converter, a three-stage Cockcroft-Walton and PFC(Power factor correction) circuit. The output ripple voltage can be controlled the minimum of 0.24% under the high frequency switching of 231kHz. Furthermore, the output efficiency was improved to 16.4% and the laser output stability of about 5.6% was obtained in this laser system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.2
• /
• pp.175-181
• /
• 2016

In the conventional E-bike, a 42 V/10 A Li-ion battery drives a 24 V/10 A BLDC motor via a 6-switch PWM DC/AC inverter. The major problems of the conventional battery-fed motor drive systems are listed as follows. To charge the battery, an external battery charger (adapter) is required, which degrades the portability of E-bike users. In addition, given the high-frequency operation of the motor drive inverter, the switching losses are significant, which degrades the whole power efficiency. High-voltage batteries (42 V) require a complex battery management system (BMS), which degrades the reliability of the battery pack. In this paper, an embedded boost-converter battery charger for E-bikes is proposed. The variable output boost converter, which converts 16.8 V battery voltage to the required variable voltage of the inverter input, can use a low-voltage battery and thus improve the reliability of batteries. By varying the inverter input voltage via boost converter, a DC link voltage control method can be applied to reduce the switching frequency of the inverter, which improves the whole power efficiency. Given that the function of a flyback charger is integrated in the proposed boost converter, the portability of the E-bike user can be maximized by excluding an external adapter. The validity of the proposed circuit will be confirmed by operation mode analysis and simulation. Moreover, experimental results of integrative charger using Li-ion battery and 200 W motor test will be showed with a prototype sample as well.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.6
• /
• pp.569-576
• /
• 2011

This paper proposes a new dead time compensation method for a PWM inverter. Recently, PWM inverters are extensively used for industry applications, such as ac motor drives, distributed grid-connected systems and a static synchronous compensator (STATCOM). Nonlinear characteristics of the switch and the inverter dead time cause a current distortion and deterioration of power quality. The dominant harmonics in the output current are the $5^{th}$ and $7^{th}$ harmonics in the stationary frame, and the $6^{th}$ harmonics in the synchronous rotating frame. In this paper, a resonant controller which compensates the $6^{th}$ harmonics in the synchronous rotating frame is proposed. This method does not require any off-line experimental measurements, additional hardware and complicated mathematical computations. Furthermore, the proposed method is easy to implement and does not cause any stability problem.