• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.89-93
• /
• 2005

A rear contact solar cell has a potential merit of efficiency improvement by a low shading loss in front surface. a simplified module assembly. and a higher packing density. Among the rear contact solar cells. MWT. metallizationl wrap through MWT solar cells that have the bus bars on the back side and the front side metallization is connected to the back through metal filled laser fired holes in the silicon wafer. This approach has the advantages of a much more uniform appearance. The first fabrication of MWT using a multicrystalline silicon modules in our group showed $12.28\%$ on $125mm{\times}125mm$ active area.

• 한국태양에너지학회 논문집
• /
• 제24권4호
• /
• pp.77-87
• /
• 2004

BIPV or double skin applied to the surface of the building, power and thermal load cannot both be increased. In the case of BIPV, because it is applied to the facade, incident solar energy decreases and efficiency drops off. The system in this paper complements these disadvantages and aims to decrease the heating & cooling load by transforming solar energy to electronic and thermal energy. The research in this paper is about the applicability of the clear PV attached double-skin system. And the PV electronic generation and the factors that affect the heating & cooling load such as the daily radiation, sun shading ratio, heating & cooling load, daylight luminance and glare distributions in the building are simulated.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.51-60
• /
• 2002

In this study we developed the visualization scheme of spatial ground-motion measurements in real time by using DSS data. Even though this scheme itself is useful for national earthquake mitigation plans, this scheme could be served as the crucial core for constructing rapid earthquake damage evaluation system. DSS is the abbreviation of Data Subscription Service and this is the pre-assigned request for the seismic stations to send very limited brief data with high priority and negligible transmission load. In addition to visualize the damage area with intensity, the corresponding epicenter can be estimated roughly for quick event alarm. For the interpolation of spatially irregular PGA data, the program, named as surface. of GMT was used with NetCDF grid file format. Since the grid file is similar to a postscript file, the program, called as shading, was coded with C language by using Matpak library in order to convert grid files into image files.

• 소성∙가공
• /
• 제12권8호
• /
• pp.738-743
• /
• 2003

The major problems of a plastic injection mould can be devided into two kinds, one is in mould another in injected parts. Most of defects of the former comes from mould design, such as, structure and working. The latter are weld line, warpage, sink mark, burning, flow mark, scratching, shading, black hole and so on. Most of problems in injection molding are difficult to find the reason because of complexity. The purpose of this paper is to improve the quality of plastic injection mould and parts with inquiring the counter plan and analizing troubles of the part of Flat TV Front Cover by flow control method and gas-assisted injection moulding. For minimizing defects of the injection moulded parts, computer aided simulation method for injection mould filling was used. Based on these numerical results, the guidelines of mould design and injection processing condition were established. As a result, the improvement of quality, such as minimizing surface defects of injection moulding parts and troubles in mould was achieved.

• 조명전기설비학회논문지
• /
• 제26권7호
• /
• pp.30-38
• /
• 2012

Recently, interests in renewable energy have gradually increased. Photovoltaic system of various renewable energy is the most interest in power sources. Nowadays, the market of photovoltaic system is expected to be expanded due to the introduction of RPS(Renewable Portfolio Standard). Floating photovoltaic system is a new power system using the water surface above the dam and reservoir water. Floating photovoltaic system is different from the traditional approach to the development of solar power system causing problems such as environmental degradation. This paper investigates the analysis methods of suitable site for the development of floating photovoltaic system. The A,B,C as the optimal candidates were selected in hap cheon dam. The C is the best suitable site in A,B,C considering the expected power generation. Applied methods have effectively done to develop floated photovoltaic system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.220-221
• /
• 2013

Exterior walls are designed and constructed through design focused exterior wall system. Nowadays, freeform facade design has been changing according to material, form and function of the exterior wall system. Especially, curtain wall facade system is designed and manufactured using solar shading faces. However, the traditional method have a lot of difficulties in the currently performing technology for curtain wall facade. It is important to make the freeform facade components that integrated as a surface of freeform buildings. Therefore it is necessary to develop unit module construction method for freeform facade.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2006년도 추계학술발표대회
• /
• pp.295-298
• /
• 2006

본 논문에서는 극 좌표계에서의 벡터 표현 방식을 이용한 per-pixel displacement mapping 방법을 제시한다. per-pixel displacement mapping은 triangle mesh의 처리 방식에 상관없이 변위매핑을 수행할 수 있도록 한 것으로, 2차원 screen space로 projection 된 triangle의 각 pixel의 위치를 객체 표면 정보에 따라 displacement 해주는 방법이다. 이는 기 검증된 범프매칭 하드웨어에 약간의 하드웨어를 추가함으로써 변위매핑을 수행할 수 있도록 한 효과적인 구조이다. 제안 방식에 의해 생성된 영상과 기존 방식에 의해 생성된 영상을 비교해본 결과, 시각적으로 거의 차이가 없음을 알 수 있다.

• 한국컴퓨터그래픽스학회논문지
• /
• 제26권1호
• /
• pp.7-15
• /
• 2020

점집합을 매끄러운 다양체 표면으로 가시화하는 과정에서 전역 조명 기법을 사용하면 다양한 조명 효과로 사실적인 장면을 렌더링 할 수 있다. 광선 추적법에 대한 지속적인 요구와 그래픽스 하드웨어의 발전을 바탕으로 광선 추적법을 위한 전용 GPU와 프로그래머블 파이프 라인이 근래에 소개되었다. 본 논문에서는 광선 추적법의 가속을 지원하는 GPU와 렌더링 파이프라인을 사용하여 점집합 모델에 대한 실시간 전역 조명 렌더링을 수행하는 방법을 제시한다. 즉, 이동 최소 자승법을 적용하여 점집합을 부드러운 음함수 표면으로 근사한 후, GPU기반 광선 추적법을 이용하여 표면과의 광선 교차 검사를 수행하고 교차점에서 쉐이딩 효과를 적용하여 전역 조명 렌더링을 수행한다. 그 결과 오십만개 이상의 점으로 구성된 복잡한 점집합 모델이 포함된 장면을 실시간에 생성할 수 있다.

• 한국정보과학회논문지:시스템및이론
• /
• 제30권11호
• /
• pp.663-674
• /
• 2003

범프 매핑은 복잡한 모델링 과정 없이 기하 매핑을 통하여 땅콩 껍질의 돌기와 같은 객체 표면의 세밀한 부분을 표현해내는 기법이다. 그러나 이 기법은 법선 벡터 쉐이딩과 같은 상당한 복잡도를 가진 연산을 픽셀 당 처리해줘야 하므로, 이의 하드웨어 구현은 상당한 비용을 필요로 한다. 본 논문에서는 극 좌표계를 이용한 새로운 범프 매핑 알고리즘 및 하드웨어 구조를 제안한다. 이는 참조 공간으로의 변환을 위한 새로운 벡터 회전 방식과 연산이 최소화된 조명 계산 방식을 갖는 구조로, 기존의 구조에 비해 범프 매핑을 효과적으로 수행한다. 결과적으로 제안하는 구조는 범프 매핑에 필요한 연산 및 하드웨어를 상당량 줄였다.

• Journal of Microbiology and Biotechnology
• /
• 제14권3호
• /
• pp.442-449
• /
• 2004

Improving the light utilization efficiency of photosynthetic cells in photobioreactors (PBRs) is a major topic in algal biotechnology. Accordingly, in the current study we investigated the effect and suitability of photosynthetic pigment reduction for improving light utilization efficiency. The light-harvesting complex II (LH-II) genes of Rhodobacter sphaeroides were removed to construct a mutant strain with less pigment content. The mutant strain exhibited a slower growth rate than the wild-type under a low light intensity, while the mutant grew faster under a high light intensity. In addition, the specific absorption coefficient was lower in the mutant due to its reduced pigment content, thus it seemed that light penetrated deeper into its culture broth. However, the distance (light penetration depth) from the surface of the PBR to the compensation point did not increase, due to an increase in the compensation irradiance of the mutant strain. Experimental data showed that a reduced photosynthetic pigment content, which lessened the photoinhibition under high-intensity light, helped the volumetric productivity of photosynthetic microorganisms.