• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1643-1646
• /
• 2003

Drawing is a mechanical operation that attenuates thick material to an appropriate thickness for the next processing or end usage. When the input material has the form of a bundle or bundles made of very thin and long shaped wire or fibers, this attenuation operation is called "bundle drawing" or "drafting" Drafting is being used widely in manufacturing staple yarns. which is indispensable for the textile industry. However, the bundle processed by this operation undertake more or less defects in the evenness of linear density. Such irregularities cause many problems not only for the product quality but also for the efficiency of the next successive processes. Since long there have been many researches tying to find out factors affecting the irregularity of linear desity, to obtain optimal drafting conditions, to develop efficient measuring and analysis methods of linear density of bundle, etc., but there exists yet no fundamental equation describing the dynamic behavior of the flowing bundle during processing. In this research a mathematical model for the dynamic behavior of the bundle fluid is to be set up on the basis of general physical lows representing physical variables, i.e. linear density and velocity as the dynamic state of bundle. The conservation of mass and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On the basis of the simplified model, the simulation was performed and the results could be confirmed by the experiments under various conditions.

• Archives of Plastic Surgery
• /
• v.37 no.6
• /
• pp.742-748
• /
• 2010

Purpose: The method of using ultrasound-assisted liposuction and excision of the remaining glandular tissue is the preferred method for treating gynecomastia and is currently used worldwide. Herein, this article described the role of ultrasound-assisted liposuction before a surgical excision in the treatment of gynecomastia. The cosmetic results were objectively evaluated. Methods: 11 patients (22 breasts) underwent ultrasoundassisted liposuction and suction-assisted lipectomy between April 2007 and January 2009. At the end of the liposuction, the remaining glandular tissue was removed through the incision used for liposuction. We evaluated the cosmetic results using ordinary scale methods on the basis of four categories (recurrence, symmetry, contour irregularity, and scar). Results: The volume of aspirates ranged between 50 and 200 cc per breast and the average weight of tissue removed by excision was 65g per breast. No complications were recorded. Regarding the cosmetic evaluation, the recurrence, contour irregularity, and scar were excellent, the symmetry was good, and the overall results represented all those cases were mostly excellent. Conclusion: Ultrasound-assisted liposuction has many advantages in the treatment of gynecomastia. When excising the remaining glandular tissue, bleeding is decreased by the use of a tumescent technique. The glandular tissue is easily mobilized and excised after being "morselized" with ultrasound-assisted liposuction. The glandular tissue is simply dissected via the suction surface. Compared the residual mound of glandular tissue beneath the nipple and areola to the periphery, it facilitates precise control of the excision.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.2
• /
• pp.137-143
• /
• 2018

The aim of this study is to compare the differences of the demineralization resistance of resin infiltration and 1.23% acidulated phosphate fluoride in bovine teeth with artificial caries. We applied 1.23% Acidulated phosphate fluoride (APF) gel and $Icon^{(R)}$ caries infiltrant on the artificial bovine enamel carious lesion and then demineralized all samples. The depth of demineralization was measured by using Confocal Laser Scanning Microscope (CLSM) and observed the roughness and irregularity of the enamel was observed by Scanning Electron Microscope (SEM). In this experiment with demineralization resistance on smooth artificial carious lesion, less depth of demineralization, roughness, and irregularity of enamel was observed in APF gel and $Icon^{(R)}$ group than in the control group. There was no significant difference between the depth of demineralization of 1.23% APF gel and $Icon^{(R)}$ caries infiltrant group. However, resin infiltration is beneficial as less roughness and irregularity was observed on the enamel surface than when 1.23% APF gel is applied.

• Restorative Dentistry and Endodontics
• /
• v.32 no.5
• /
• pp.411-418
• /
• 2007

The most scientific and reliable method for deciding the tooth color is the instrumental measurement. However, such color measuring instrument shows the difference of the measuring value according to the diversified measuring condition. This study was conducted to evaluate what effect of the labial surface irregularity of the tooth to the result of the color measured by spectrometer. 11 models of the teeth were made by injecting the A2 shade Luxatemp Automix Plus (DMG, Germany) into the impression acquired from 11 adults. Standard disk samples (15 mm diameter, 7 mm thickness) were made with same material. CIE $L^*a^*b^*$ value was measured at the incisal, central, and gingival area of the central incisor, lateral incisor, canine and first premolar using Specbos 2100 (JETI, Germany) spectrometer. Color difference was calculated between labial surface and standard samples. Among all models of the teeth, $L^*\;and\;b^*$ value showed the reducing tendency as they go toward the gingival area, but $a^*$ value showed the increasing tendency. Color difference between model teeth and standard samples showed the most difference at the incisal area, but the gingival area showed the least difference. And the canine showed the least color difference from the comparison of standard sample, and the central incisor showed the highest difference (p < 0.01). Although the visually detectable difference of the measuring value showed notably depending on the type and measured area (p < 0.05), $L^*\;and\;a^*$ value showed notable differences depending more on the measured areas than on the type of the teeth.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.342-346
• /
• 2006

The method presented is also efficient and applicable in estimating the discharge in high flows that are very difficult or impossible to measure before, due to technical or theoretical reasons. The method can drastically reduce the time and cost of measurement, regardless of the irregularity in the geometrical shape. With Microwave Water Surface Velocity Meter, An entropy based method for determining the discharge in the rivers can be used to develop real-time discharge measurement system (RDMS) which can carry out the real-time inflow hydrograph.

• Journal of Magnetics
• /
• v.17 no.4
• /
• pp.298-301
• /
• 2012

In order to know the effect of surface irregularity in the detection of local wall thinning of pipeline using pulsed eddy current (PEC), the lift-off effects on PEC signal have been investigated. Three kinds of parameters in the PEC signal, which is "peak amplitude", "time to peak amplitude" and "time to zero crossing" are analyzed to separate the lift-off effects in the PEC signal. The distance from sensor to the bottom of sample which is the total thickness of combined insulator and sample is kept constant. The magnitude of the differential peak amplitude is increased with increasing sample thickness, the time to peak amplitude is increased with increasing the sample thickness. To determine the effect of lift-off, a number of balanced transient responses combining wall thinning locations and lift-off distances were plotted.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.2 no.2 s.2
• /
• pp.101-106
• /
• 2004

Allergic contact dermatitis is a common skin disease resulting from specific immunologic sensitization to topically applied various allergen. The Purpose of this study was to investigate skin morphologic cahnges by light microscopic and scanning electron Microscope, changes of protein band by SDS-PAGE(SDS-polyacrylamide gel electrophoresis) in the skin effectiveness for beruty improvement of Geranium essential oil on skin troubles by surfactant. The results of the study are as follows, 1. From the observed result of FE-Scanning Electron Microscope, groups treated by Geranium essential oil in group treated Geranium essential oil during 1 week in surfactant treated group during 1 week, the group was repaired in irregularity surface of tissue by alleviate-keratinization of Geranium essential oil. 2. As a result of protein analysis the group treated on surfactant was rised protein upper range of 97,0004a11on by hyper-keratinization and group treated during 1 week by surfactant was decreased protein below range of 43,000dalton.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.161-168
• /
• 2005

Torsional behavior of eccentric structure under seismic loading may cause the stress and/or deformation concentration. Hence it is hard to estimate the seismic behavior of the structure with plan irregularity. This study suggests the method to setup the seismic fragility curve of the torsionally irregular structures. The suggested fragility curve may be acquired from the fragility surface defined on the D-R plan according to the estimated torsional behavior. The torsional behavior is predicted considering the inelastic region by adapting the inelastic stiffness of each wall. Finally the system displacement is converted to the spectral acceleration and the fragility curve for the seismic excitation level is presented. In addition, the fragility curve considering the excitation direction is proposed.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1115-1120
• /
• 2007

Recently, the development of the paved track is required as a low-maintenance of conventional line. The main reason is that the line capacity and bearing of track are increased progressively. The important factors of paved track are stability and applicability. To be based on this subject, Cement Mortar Pouring(CMP) paved track is developed. CMP paved track is a kind of ballast reinforced track using the prepacked concrete technique. The most important thing to design the paved track is to optimize the track structure considering various conditions. In this study, the CMP track is constructed(30m) on a test line and the track performance tested by running train to evaluation the capability and workability. The track performance are tested to confirm the vibration acceleration of the car body, wheel and track, accumulated settlement, track irregularity and crack of surface.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.3
• /
• pp.414-422
• /
• 1999

The purpose of this study is to develop multifunctional fabric that was improved antimicrobial activity and reduction rate of gas by treatment of mixture that was blended chito colla ad crosslinking material for Nylon. Antimicrobial activity was proved 99% reduction rat of gas in case of treated was icreased. The surface of treated fiber noted harshness and irregularity. Whiteness of treated on the baking condition was decreased as time and temperature was increased. Air permeability and moisure regain of treated equally was maintained. Water absorption and static voltage of treated were increased. KOSHI and T.H.V. of treated was increased than that of untreated B/W of treated was improved that, that of untreated and 2HB/B. W/T of treated were reduced.