• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.145-155
• /
• 2002

The results of the present feasibility study are summarized as follows, 1. The three unit bridge of knitted material and UD fibre reinforcement has both the rigidity and the strength against a vertical occlusal load of 75N. 2. Stress concentration at the junctional area between the bridge and the abutments, i.e. between the pontic and the knitted caps was observed. In the case of the bridge with reinforcement straps, it was partly shown that the concentration problem could be improved by simply increasing the fillet size at the area. Further refining in the surface of the junctional area will be needed to ensure a further improvement in the stress distribution. This will require some trade off in the level of the stress and the available space. A parametric study will help to decide the appropriate size of the fillet. 3. Design refinement is a must to improve the stress distribution and realize the most favourable shape in terms of fabrication. The current straight bar with a constant cross section area can be redesigned to a tapered shape. The curve from the dental arch should also be placed on the pontic design. In accordance with design refinement, the resistance of the bridge frame to other load cases should be evaluated. 4. Although not included in the present feasibility study, it is estimated that bridges of the anterior teeth can be made strong enough with the knitted material without further reinforcement using unidirectional materials. In this regard, a feasibility study on design concepts and stress analysis for 3, 4, 5 unit bridge is suggested. 5. Two types of bridge were analysed in terms of fatigue. The safe life design concept, i.e. fatigue design concept, looks reasonable for the bridge where if cracks should form and propagate there is virtually nothing a dentist to do. The bridge must be designed so that no crack will be initiated during the life span. In the case of crowns, however, if constructed with composite resin with knitted materials, it might be possible to repair them, which in general is impossible for crowns of PFM or of metal. Therefore for composite resin crowns, a damage tolerance design concept can be applied and reasonably higher operational stresses can be allowed. In this case, of course, a periodic inspection program should be established in parallel. 6. Parts of future works in terms of structural viewpoint which need to be addressed are summarized as the following: 1) To develop processing technology to accommodate design concepts; 2) More realistic modelling of the bridge and analysis-geometry and loading condition. Thickness variation in the knitted material, taper in the pontic, design for anterior tooth bridge, the effect of combined loads, etc, will need to be included; 3) To develop appropriate design concepts and design goals for the fibre composite FPD aiming at taking the best advantage of knitted materials, including the damage tolerance design concept; 4) To develop testing method and perform test such as static ultimate load test, fatigue test, repair test, etc, as necessary.

• Korean Journal of Ecology and Environment
• /
• v.52 no.4
• /
• pp.293-305
• /
• 2019

In this study we investigated the effect of a floating photovoltaic (FPV) system in Cheongpung Lake on water quality. The FPV with a tilt angle of 33° covered ca. 0.04% of surface area (97 ㎢) of Chungju Lake. The water qualities of the whole lake before and after installation of FPV were first compared. DO, BOD, TOC, and Chl-a of the whole lake were increased, while conductivity decreased after installation period at the significance level of 0.05. This change was probably due to the increased influx of nutrients by 40% resulting from increased precipitation during the same period. We also measured water quality parameters on May and Nov. 2017 at the FPV center (FPVC) and nearby control sites, and compared water quality. The result showed that the FPVC and nearby sites were not significantly different (p>0.05), demonstrating that the FPV does not cause a decline of water quality. The water temperature, light intensity, and phytoplankton community were also measured. The water temperature was not different between the sites, while the light intensity decreased to 27~50%. Despite reduced light intensity at FPVC, the phytoplankton standing crops and the number of species were not significantly different (p>0.05). However, in the early November samples, standing crops was significantly higher in FPVC than control with periphytic diatoms belonging to Aulacoseira genus being dominant. This may be due to the temporal water body behavior or local retention of current by FPV system. This study may provide a measure of future installation of a FPV system.

• Journal of Plant Biotechnology
• /
• v.39 no.1
• /
• pp.69-74
• /
• 2012

Using calli of $Muscari$ $armeniacum$ cv. 'Early Giant' that is monocotyledonous ornamental bulb crop with increasing demand in Korea, we carried out current studies to establish an in vitro multiple propagation protocol via somatic embryogenesis. We found that soft pale yellow green calli were induced from leaf explants cultured on all media containing 0.1~3.0 $mg{\cdot}L^{-1}$ auxins such as 1-naphthalene acetic acid (NAA) and 2,4-dichlorophenoxyacetic acid (2,4-D). However, induced calli showed vigorous growth only when they further transferred on same media containing 2,4-D, 4-amino-3,5,6-tri-chloropicolinic acid (picloram), or 3,6-dichloro-o-anisic acid (dicamba). Although frequency of somatic embryo induction depended on callus source and PGR composition in somatic embryo induction media, somatic embryogenesis was initiated on surface of proliferated calli after transferring on media with no PGR or 0.01 $mg{\cdot}L^{-1}$ NAA co-supplemented with various cytokinins such as $N^6$-benzylaminopurine (BAP). Highest number of embryo at 9.3 per callus clump was obtained when calli which were grown under 0.1 $mg{\cdot}L^{-1}$ picloram supplementation were sub-cultured on medium with 0.01 $mg{\cdot}L^{-1}$ NAA and 0.5 $mg{\cdot}L^{-1}$ BAP. In addition, morphological characteristics of somatic embryo were categorized into following nine phases: globular, biased heart, biased torpedo, early cotyledonary, middle cotyledonary, late cotyledonary, early sprouting, middle sprouting, and late sprouting embryos.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_1
• /
• pp.917-930
• /
• 2017

To understand the temporal and spatial variations of surface chlorophyll-a concentration (Chl-a) distribution in the Indian Ocean ($30^{\circ}E{\sim}120^{\circ}E$, $30^{\circ}S{\sim}30^{\circ}N$) by the Indian Ocean Dipole (IOD), we conducted EOF and K means analyses of monthly satellite-derived Chl-a data in the region during 1998~2016 periods. Chl-a showed low values in the central region of the Indian Ocean and relatively high values in the upwelling region and around the marginal regions of the Indian Ocean. It also had a strong seasonal variation of Chl-a, showing the lowest value in the spring and the highest value in summer due to the change of the monsoon and current system. The EOF analysis showed that Chl-a variation in EOF mode 1 is related to ENSO (El $Ni{\tilde{n}}o$/Southern Oscillation) and that of mode 2 is linked to IOD. Both modes explained spatially opposite trends of Chl-a in the east and west Indian Ocean. From K means analysis, the Chl-a variation in the east and west Indian Ocean, and around India have relatively good relationship with IOD while that in the tropical and middle Indian Ocean closely associated with ENSO. The spatial and temporal distribution of Chl-a also showed distinct spatial and temporal variations depend on the different types of IOD events. IOD classifies two patterns, which occurred during the developing ENSO (First Type IOD) and the year following ENSO event (Second Type IOD). Chl-a variation in the First Type IOD started in summer and peaked in fall around the east and west Indian Ocean. Chl-a variation in the Second Type IOD occurred started in spring, peaked in summer and fall, and disappeared in winter. In the Chl-a variation related to IOD, developing process appearing in the Chl-a difference between the east and west Indian ocean was similar. Chl-a variation in the northern Indian Ocean were opposite trend with changing developing phase of IOD.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.435-444
• /
• 2001

Daily time series of longshore wind at 8 stations, sea surface temperature (SST) at 11 stations in the eastern coast of the Korean peninsula during $1983\~1997$ and the NOAA/AVHRR satellite data during $1990\~1998$ were used in order to study the temporal and spatial variations of the upwelling cold water which occurred in the summer season. The cold water occurred frequently in the eastern coastal waters of Korea such as Soimal, Kijang, Ulgi, Kampo, Pohang, Youngduk, Chukbyun, Chumunjin and Sokcho, During the upwelling cold water phenomenon, SST came down more than $-5^{\circ}C$ in a day. The maximum of the averaged RMS amplitude of daily SST was $5.8^{\circ}C$ along the eastern coast of Korea on Julian day 212 from $1983\~1997$. The cross correlation coefficients were higher than 0.5 between Sokcho and Chumunjin in the northern part of the East Sea, and along Soimal, Kijang, Ulgi, Kampo and Pohang in the southern part of the East Sea. In late July, 1995 the cold water occurred at Ulgi coastal area and extended to Ullung island which is located 250 km off the Ulgi coast. Even though the distance between Soimal and the Ulgi coast area is more than 120 km, the cross correlation coefficient related to the anomalies of SST due to upwelling cold water was the highest (0.7) in the southeastern coastal area of the Korean peninsula. This connection may be due to the cyclonic circulation of the Tsushima Current in this area and the topography of the ocean rather than the local south wind which induced the coastal upwelling.

• Current Research on Agriculture and Life Sciences
• /
• v.29
• /
• pp.11-19
• /
• 2011

This research gives weight to establish practical improvement based on analysis of the landscape ecological character and value to realize the importance of small wetland and stream in cultivated areas functioning as a residual landscape element in rural landscape and to deal with ecological depression effectively. The results of summary are as follows. 1) The results of landscape ecological character analysis of wetlands biotop in total of 7 sites, for example, size of surface in site 5 was widely formed about $10,600m^2$, which was assessed satisfactory in terms of slope of waterfront, width of hedgerow, vegetation condition of composition and so on. Also, The number of flexibility showed 2 in site 8-1, the highest, and morphological diversity showed 1.47, the highest. 2) The results of problem analysis of wetland biotop, most of wetlands are analyzed that the width of hedgerow was below 1m. Also, the 4 wetlands in site 8 are appeared that hard to live slope vegetation in there because of slope of waterfronts are above $45^{\circ}$. 3) The results of landscape ecological character analysis of stream in total of 6 sites, for example, width of waterfront in site 4 showed 55m, the widest, and investigated consist of natural ingredients such as soil, rock, gravel. However, width of waterfront in site 2-2 showed 4m, the narrowest, and inclined angle of slope was formed a right angle. 4) The results of problem analysis of stream, width of waterfront hedgerow in site 2-1 showed about 5m, which was very narrower than width of waterfront, and toxic chemicals discharged from near cultivated area without any filtering. Also, all areas of site 2-2 was formed concrete, and was assessed dissatisfactory in terms of capacity of nature purification, flood control, habitat living space because of straight stream. 5) Based on the result above landscape ecological character and problem analysis, main improvement guidelines are set in terms of shape, vegetation, topography in case of wetlands, and which are set in terms of vertical, horizontal structure in case of stream.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.2
• /
• pp.131-146
• /
• 2014

High-resolution seismic profiles coupled with sediment sampling were analyzed to investigate the acoustic characters and distribution patterns of the late Holocene sediments in Gamak Bay of the South Sea, Korea. The mean grain size of surficial sediment lies around $6.3{\sim}9.7{\Phi}$. Sediments in the bay consist of silt and clay with progressive decrease toward the inner bay. The seismic sedimentary sequence overlying the acoustic basement can be divided into two sedimentary units (GB I and II) by a prominent mid-reflector (Maximum Flooding Surface; MFS). The acoustic basement occurs at the depth between 20 m and 40 m below the sea-level and deepens gradually southward. The GB I, mostly occupying the channel-fill, is characterized by reflection-free seismic facies. It can be formed as late Transgressive System Tract (TST), interpreted tidal environment deposits. MFS appears at the depth of about 15~28 m below the sea-level and is well defined by even and continuous reflectors on the seismic profile. The GB II overlying MFS is composed of acoustically transparent to semitransparent and parallel internal reflectors. GB II is interpreted as the Highstand System Tract (HST) probably deposited during the last 6,000 yrs when the sea level was close to the present level. Especially, it is though that the GB II was subdivided into two layers (GB II-a and II-b) by a HST-reflector and this was classified by wind, sea water flux, and tidal current.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.2
• /
• pp.156-163
• /
• 2002

In order to development the construction and dimension of fishing gear for gizzard shad coastal purse seine, first of all investigated to the sinking speed and underwater geometry of net, behaviour of fish school to the net during the fishing operation In the field. The results obtained are summarized as follows; 1. Average sinking speed of net was 13cm/sec in bunt, 9.0cm/sec and 9.5cm/sec in 170m and 280m of center, 4.9cm/sec in end wing side, therefore was fastest in start of shooting and decreased gradually during the shooting process. 2. The most of leadline was reached in bottom from the shooting immediately to hauling time and the mean depth of timber bar used equipment for the escaping prevention of fish school was within the 2.7m. 3. The fish school of gizzard shad was appearanced higher density and remained to the most time in bottom than the surface and repeated to vortical movement, and its tendency to distinct in rapid time of tide current. 4. Behaviour of fish school in the net was showed to the vortical movement by sinking and rising immediately with the shooting of net and then divide with the two shape to follow round the wall of net and no patterns straightly movement in the net, and tendency easily catched in fish school of the wall of net. 5. Escaping of fish school in the gap of wing side was to busy after that seting the timber bar, therefore its function for escaping prevention of fish school was very lowed. 6. Escaping behaviour of fish school was differenced with the depth of fishing ground, the above 20m escaped to busy through the below in ledline because the sinking speed of fish school is fast than the net.

• Ocean and Polar Research
• /
• v.36 no.1
• /
• pp.13-24
• /
• 2014

We established the first complete ice core processing method and analytical procedures for fundamental proxies, using a 40.2 m long ice core drilled on the Mt. Tsambagarav glacier in the Mongolian Altai mountains in July 2008. The whole core was first divided into two sub ice core sections and the measurements of the visual stratigraphy and electrical conductivity were performed on the surface of these sub core sections. A continuous sequence of samples was then prepared for chemical analyses (stable isotope ratios of oxygen ($^{18}O/^{16}O$) and hydrogen ($^2H/^1H$), soluble ions and trace elements). A total of 29 insoluble dust layers were identified from the measurement of visual stratigraphy. The electrical conductivity measurement (ECM) shows 11 peaks with the current more than 0.8 ${\mu}A$ Comparing the profiles of $SO_4{^{2-}}$ and $Cl^-$ concentrations to correlate with known volcanic eruptions, the first two ECM peaks appear to be linked to the eruptions (January and June 2007) of Kliuchevskoi volcano on the Kamchatka Peninsula of Russia, which supports the reliability of our ECM data. Finally, the composition of stable isotopes (${\delta}^{18}O$ and ${\delta}D$) shows a well-defined seasonal variation, suggesting that various chemical proxies may have been well preserved in the successive ice layers of Tsambagarav ice core. Our ice core processing method and analytical procedures for fundamental proxies are expected to be used for paleoclimate and paleoenvironmental studies from polar and alpine ice cores.

• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.36-43
• /
• 1985

This study was conducted to find out the consumptive use of irrigated water for calculation of a duty of water in paddy rice. Tall statured Japonica rice variety is Jinju(late). Short statured Tongil varities-Taebaek(early) and Pungsan(medium) were planted on the experimental farm of kyungpook National University in 1983. The results obtained in this study were as follows : 1. The average temperature of the underwater surface was $27.1^{\circ}C$ and the maximum was recorded at beginning of the August. 2. The evapotranspiration was gradually increased after transplanting and showed the peak from booting to heading stage of rice varieties. The average evapotranspiration through the whole growing period was 8. 43mm/day(Jinju) for tall statured Japonica variety, and 7.78mm/day(Taebaek), 7.71mm/day(Pungsan) for short statured Tongil varieties. 3. The ratio of evapotranspiration to pan-evaporation through the whole growing period was 1.71 for Japonica variety and 1.55 for Tongil varieties. 4. K-value in Blaney & Criddle formula was 1.41 for Japonica variety and 1.30 for Tongil varieties. Coefficient consumptive use of water (Kc-value) was 1.40 for Japonica variety and 1.27 for Tongil varieties. 5. It appeared that the water consumption in the 6, 8 cm pot is more than that of 2, 4 cm pot but the number of panicle of the 6, 8 cm pot is somewhat less than that of 2, 4 cm pot. The deeper water level is the less tiller became. It is consindered that 2 cm pot is more profitable than the others.