• The KSFM Journal of Fluid Machinery
• /
• v.10 no.6
• /
• pp.7-16
• /
• 2007

An axial-type fan which operates at the relative total pressure of 671Pa and static pressure of 560Pa with the flow rate of $416.6m^3/min$ is developed with an optimization technique based on the gradient method. Prior to the optimization of fan blade, a three-dimensional axial-type fan blade is designed based on the free-vortex method along the radial direction. Twelve design variables are applied to the optimization of the rotor blade, and one design variable is selected for optimizing a stator which is located behind of the rotor and is used to support a fan driving motor. The total and static pressure are applied to the restriction condition with the operating flowrate on the design point, and the efficiency is chosen as the response variable to be maximized. Through these procedures, an initial axial-fan blade designed by the free vortex method is modified to increase the efficiency with the satisfaction of the operating condition. The optimized fan is tested to compare the aerodynamic performance with an imported same class fan. The test result shows that the optimized fan operates with the satisfaction of restriction conditions, but the imported fan cannot. From the experimental and numerical test, they show that this optimization method improves the fan efficiency and operating pressures of a fan designed by the classical fan design method.

• Journal of Korea Water Resources Association
• /
• v.52 no.8
• /
• pp.565-573
• /
• 2019

An optimization model of water intake planning is developed based on a linear programming (LP) for the intelligent water purification plant operation system. The proposed optimization model minimizes the water treatment costs of raw water purification by considering a time-delay of treatment process and hourly electricity tariff, which is subject to various operation constraints, such as water intake limit, storage tank capacity, and water demand forecasts. For demonstration, the developed model is applied to H water purification center. Here, we have tested three optimization strategies and the results are compared and analyzed in economic and safety aspects. The optimization model is expected to be used as a decision support tool for optimal water intake scheduling of domestic water purification centers.

• Journal of Internet Computing and Services
• /
• v.16 no.6
• /
• pp.69-78
• /
• 2015

Recently, research on the multi-agent system is developed actively in the various fields, especially on the control of complex system and optimization. In this study, we develop a multi-agent system for NPC simulation in game environment. The purpose of the development is to support quick and precise decision by inferencing the situation of the dynamic discrete domain, and to support an optimization process of the agent system. Our approach employed Petri-net as a basic agent model to simplify structure of the system, and used fuzzy inference engine to support decision making in various situation. Our experimentation describes situation of the virtual battlefield between the NPCs, which are divided two groups, such as fuzzy rule based agent and automata based agent. We calculate the percentage of winning and survival rate from the several simulations, and the result describes that the fuzzy rule based agent showed better performance than the automata based agent.

• Journal of Korea Multimedia Society
• /
• v.7 no.2
• /
• pp.145-155
• /
• 2004

It is very important for Internet searching systems to have user-friendly and rapid searching functions at the managers'point of view. The former finds optimized input parameters to support the various searching requirements of user. The latter has fast searching results which are effectively normalized to various input parameters having different attributes. In this paper we basically focus on optimized database construction not only to have searching functions with multiple attributes to support maximal various input requirements of the user but also to have more rapid searching functions. For this research, we suggest a modified association algorithm that takes into consideration to the support and confidence that is the criteria of the association mining rule in order to reflect the searching characteristics of internet shopping malls. We also propose the model management systems for rapid searching functions. The following results are from a processed simulation: the more the number of searching transactions of the users increase, the less the total relative average searching time becomes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1B
• /
• pp.40-52
• /
• 2007

Mobile IP allows mobile end-systems to maintain on-going connections while moving to other links. Based on the Internet Protocol Version 6 (IPv6), mobile IPv6 provides a set of new mobility functions such as route optimization in addition to the functions in mobile IPv4. This paper describes the hardware-based mobile IPv6 implementation which provides all the mobility functionalities in hardware. The hardware-based mobile IPv6 provides faster mobility support than software-based implementation as well as it reduces the number of packet losses which can be caused during the movement. In end-systems equipped with hardware-based mobility support, the CPU can concentrate more on running application programs without wasting its effort for mobility support, and hence it is expected the overall performance improvement.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.163-169
• /
• 1999

Mobile-IP has been designed to have mobile computer users move from place to place without changing their IP addresses. Mobile-IP introduces the following entities to support mobility: Home Agent. Foreign Agent, etc., and it uses the techniques such as Agent Discovery, Registration. and Tunnelling. Mobile-IP route optimization provides a mechanism by which correspondent nodes are enable to know the mobile host's care-of address to alleviate the triangle routing problem. As a further performance improvement, to alleviate the overhead resulted from the frequent local mobility within a site hierarchical foreign agents are presented, and as a foreign agent which is willing to participate in communication maintain a buffering mechanism not to loss packets for mobile host, smooth handoffs is presented. In this paper, the problems to be thought to support host's mobility and the existing method to support it is discussed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.1 s.71
• /
• pp.47-54
• /
• 2006

In this study, an optimum support design problem is considered to minimize displacement of stacked plates under self weight condition. During the displacement analysis, several kinds of contact arise between the plates themselves and support bar. These can be easily considered if commercial analysis software, which provides capability to solve the contact problem, is used. It is found, however, that the computing time is extraordinarily long due possibly to the generality of the software and also to the ignorance of the control parameters used in the software. In this paper, the contact condition is imposed directly by the authors, while the software is used only to solve the ordinary displacement analysis problem. In this way, the computing time is decreased remarkably by more than 30 times, while yielding the same accurate results. Optimization is conducted based on this efficient analysis method to find minimum number of supporting bars using the response surface algorithm.

• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.148-163
• /
• 2021

Timely fault identification is important for safe and reliable operation of the electric valve system. Many research works have utilized different data-driven approach for fault diagnosis in complex systems. However, they do not consider specific characteristics of critical control components such as electric valves. This work presents an integrated shallow-deep fault diagnostic model, developed based on signals extracted from DN50 electric valve. First, the local optimal issue of particle swarm optimization algorithm is solved by optimizing the weight search capability, the particle speed, and position update strategy. Then, to develop a shallow diagnostic model, the modified particle swarm algorithm is combined with support vector machine to form a hybrid improved particle swarm-support vector machine (IPs-SVM). To decouple the influence of the background noise, the wavelet packet transform method is used to reconstruct the vibration signal. Thereafter, the IPs-SVM is used to classify phase imbalance and damaged valve faults, and the performance was evaluated against other models developed using the conventional SVM and particle swarm optimized SVM. Secondly, three different deep belief network (DBN) models are developed, using different acoustic signal structures: raw signal, wavelet transformed signal and time-series (sequential) signal. The models are developed to estimate internal leakage sizes in the electric valve. The predictive performance of the DBN and the evaluation results of the proposed IPs-SVM are also presented in this paper.

• The KIPS Transactions:PartC
• /
• v.19C no.3
• /
• pp.191-208
• /
• 2012

Proxy Mobile IPv6 (PMIPv6) is designed to provide network-based mobility management support to an MN without any involvement of the MN in the mobility related signalling, hence, the proxy mobility entity performs all related signalling on behalf of the MN. The new principal functional entities of PMIPv6 are the local mobility anchor (LMA) and the mobile access gateway (MAG). In PMIPv6, all the data traffic sent from the MN gets routed to the LMA through a tunnel between the LMA and the MAG, but it still has the single point of failure (SPOF) and bottleneck state of traffic. To solve these problems, various approaches directed towards PMIPv6 performance improvements such as route optimization proposed. But these approaches add additional signalling to support MN's mobility, which incurs extra network overhead and still has difficult to apply to multiple-LMA networks. In this paper, we propose a improved route optimization in PMIPv6-based multiple-LMA networks. All LMA connected to the proxy internetworking gateway (PIG), which performs inter-domain distributed mobility control. And, each MAG keeps the information of all LMA in PMIPv6 domain, so it is possible to perform fast route optimization. Therefore, it supports route optimization without any additional signalling because the LMA receives the state information of route optimization from PIG.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.2
• /
• pp.141-148
• /
• 2011

Support vector machines have been extensively studied and utilized in pattern recognition area for years. One of interesting applications of this technique is music/speech classification for a standardized codec such as 3GPP2 selectable mode vocoder. In this paper, we propose a novel approach that improves the speech/music classification of support vector machines. While conventional support vector machine optimization techniques apply during training phase, the proposed technique can be adopted in classification phase. In this regard, the proposed approach can be developed and employed in parallel with conventional optimizations, resulting in synergistic boost in classification performance. We first analyze the impact of kernel width parameter on the classifications made by support vector machines. From this analysis, we observe that we can fine-tune outputs of support vector machines with the kernel width parameter. To make the most of this capability, we identify strong correlation among neighboring input frames, and use this correlation information as a guide to adjusting kernel width parameter. According to the experimental results, the proposed algorithm is found to have potential for improving the performance of support vector machines.