• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.3
• /
• pp.417-422
• /
• 1998

This study was performed to obtain information about the extraction conditions of lipids from microalgae, Spirulina platensis, using supercritical fluid $CO_2$. Regardless of extraction temperature conditions, the extracted lipid contents increased as pressure increased, but decreased at 8500 psi on each temperature. The highest yield of extracted lipid content showed in the condition of 5500psi at $50^{\circ}C$, and extracted lipid content was about $20\%$. In same pressure the contents of C18 : 2 and C20 : 0 increased as temperature increased, but fatty acids composition were $60\~75\%$ saturated, $12\~20\%$ monounsaturated and $13\~31\%$ polyunsaturated regardless of extraction conditions. The C18 : 3 was only detected in the condition of 5500psi at $50^{\circ}C$ but the content was very little.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.7
• /
• pp.4435-4440
• /
• 2013

Aloe vera gel supercritical $CO_2$ extract (AVGE) has been shown to contain five phytosterols, reduce visceral fat accumulation, and influence the metabolism of glucose and lipids in animal model experiments. Recent epidemiologic studies have shown that obesity is an established risk factor for several cancers including colorectal cancer. Therefore, we examined the effects of AVGE on intestinal polyp formation in Apc-deficient Min mice fed a high-fat diet. Male Min mice were divided into normal diet (ND), high fat diet (HFD), low dose AVGE (HFD+LAVGE) and high dose AVGE (HFD+HAVGE) groups. The ND group received AIN-93G diet and the latter 3 groups were given modified high-fat AIN-93G diet (HFD) for 7 weeks. AVGE was suspended in 0.5% carboxymethyl cellulose (CMC) and administered orally to mice in HFD+LAVGE and HFD+HAVGE groups every day (except on Sunday) for 7 weeks at a dose of 3.75 and 12.5 mg/kg body weight, respectively. ND and HFD groups received 0.5% CMC alone. Between weeks 4 and 7, body weights in the HFD and HFD+LAVGE groups were reduced more than those in the ND group. However, body weights were not reduced in the HFD+HAVGE group. Mice were sacrificed at the end of the experiment and their intestines were scored for polyps. No significant differences were observed in either the incidence and multiplicity of intestinal polyps (${\geq}0.5$ mm in a diameter) among the three groups fed HFD. However, when intestinal polyps were categorized by their size into 0.5-1.4, 1.5-2.4, or ${\geq}2.5$ mm, the incidence and multiplicity of large polyps (${\geq}2.5$ mm) in the intestine in the HFD+HAVGE group were significantly lower than those in the HFD group. We measured plasma lipid (triglycerides and total cholesterol) and adipocytokine [interleukin-6 and high molecular weight (HMW) adiponectin] levels as possible indicators of mechanisms of inhibition. The results showed that HMW adiponectin levels in the HFD group were significantly lower than those in the ND group. However, the levels in the HFD+HAVGE group were significantly higher than those in the HFD group. These results indicate that HAVGE reduced large-sized intestinal polyps and ameliorated reduction in plasma HMW adiponectin levels in Min mice fed HFD.

• Economic and Environmental Geology
• /
• v.51 no.3
• /
• pp.223-232
• /
• 2018

The viscous force of fluids and the capillary force acting on the pore network of the porous media are important factors determining the immiscible displacement during geological $CO_2$ sequestration, these were directly affected by geological formation conditions and injection conditions. This study aimed to observe the migration and distribution of injected fluid and pore water, and quantitatively investigate displacement efficiency on various injection temperatures. This study aimed to perform micromodel experiments by applying n-hexane used as a proxy fluid for supercritical $CO_2$. In this study, immiscible displacement process from beginning of n-hexane injection to equilibrium of the distribution of the n-hexane and pore water was observed. The images from experiment were used to observe the displacement pattern and estimate the areal displacment efficiency of the n-hexane. For investigate the affects of the injection temperatures on the migration in macroscopic, migration of n-hexane in single pore was analyzed. The measurement revealed that the displacement efficiency at equilibrium state decreases as the temperature increases. The result from experiments indicate that the temperatures can affect the displacement pattern by changing the viscous forces and the capillary forces. The experimental results could provide important fundamental information on reservoir conditions and fluid injection conditions during geological $CO_2$ sequestration.

• Clean Technology
• /
• v.24 no.4
• /
• pp.275-279
• /
• 2018

In this study, microemulsion formation of water and carbon dioxide was investigated by using surfactant as one of the methods for increasing the mutual solubility between water and carbon dioxide. The surfactant 2,2,3,3,3-Pentafluoro-1-propanol was added to form a microemulsion of water and carbon dioxide. The cloud point change and trend of micro emulsion were investigated by adding water and a certain amount of surfactant, 2,2,3,3,3-Pentafluoro-1-propanol to supercritical carbon dioxide. In the case of surfactant + carbon dioxide system, it was 8.35 ~ 12.69 MPa in temperature range of 313.2 ~ 353.2 K. In the case of water + surfactant + carbon dioxide system, the temperature ranged from 318.2 ~ 338.2 K to pressure range 7.83 ~ 17.28 MPa.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.958-964
• /
• 2008

In this work, micro-sized dextran particles, which have recently been focused as one of the candidate materials for the Drug Delivery System(DDS), were prepared by means of the Supercritical Antisolvent (SAS) process with $CO_2$. With dimethyl sulfoxide(DMSO) as the solvent, effects of the operating variables such as temperature (308.15~323.15 K), pressure(90~130 bar), solute concentration(10~20 mg/ml), and the molecular weight of the solute(Mw=37,500, 450,000) on the size and morphology of the resulting particles were thoroughly observed. The higher solute concentration led to the larger particles, however, the injection velocity of the solution and pressure did not show significant effects on the resulting particle size. With dextran of the lower molecular weight, the smallest particles were obtained at 313.15 K. On the other hand, the size of the particles from the high molecular weight dextran ranged between $0.1{\sim}0.5{\mu}m$ with an incremental effect of the temperature and pressure. For the solute concentration of 5 mg/ml, the lower molecular weight dextran did not form discrete particles while aggregation of the particles appeared when the solute concentration exceeded 15 mg/ml for the higher molecular weight dextran. It is believed that if the solute concentration is too low, the degree of the supersaturation in the recrystallization chamber would not be sufficient for initiation of the nucleation and growth mechanism. Instead, the spinodal decomposition mechanism leads to formation of the island-like phase separation which appears similar to aggregation of the discrete particles. This effect would be more pronounced for the smaller molecular weight polymer system due to the narrower phase-splitting region.

• Applied Chemistry for Engineering
• /
• v.19 no.4
• /
• pp.402-406
• /
• 2008

A series of random copolymers, composed of 1H,1H,2H,2H-perfluoro decyl methacrylate (FDMA) as a $CO_2$-philic monomer and tert-butyl methacrylate (TBMA) as an acid labile monomer, were synthesized by free radical polymerization. The solubility of copolymers in carbon dioxide, light sensitivity at 365 nm exposure, and photoresist pattern formation properties were investigated. Furthermore, sub micron-sized poly(styrenesulfonate) : poly(3,4-ethylenedioxythiophene) (PSS : PEDOT) conducting polymer patterns were successfully prepared by pattern transfer.

• Economic and Environmental Geology
• /
• v.47 no.4
• /
• pp.421-430
• /
• 2014

In this study, a series of autoclave experiments were conducted in order to investigate the geochemical and mineralogical effects of carbon dioxide on deep subsurface environments. High pressure and temperature conditions of $50^{\circ}C$ and 100 bar, which are representative environments for geological $CO_2$ sequestration, were created in stainless-steel autoclaves for simulating the interactions in the $scCO_2$-groundwater-mineral reaction system. Zeolite, a widespread mineral in Pohang Basin where many researches have been focused as a candidate for geological $CO_2$ sequestration, and groundwater sampled from an 800 m depth aquifer were applied in the experiments. Geochemical and mineralogical alterations after 30 days of $scCO_2$-groundwater-zeolite sample reactions were quantitatively examined by XRD, XRF, and ICP-OES investigations. The results suggested that dissolution of zeolite sample was enhanced under the acidic condition induced by dissolution of $scCO_2$. As the cation concentrations released from zeolite sample increase, $H^+$ in groundwater was consumed and pH increases up to 10.35 after 10 days of reaction. While cation concentrations showed increasing trends in groundwater due to dissolution of the zeolite sample, Si concentrations decreased due to precipitation of amorphous silicate, and Ca concentrations decreased due to cation exchange and re-precipitation of calcite. Through the reaction experiments, it was observed that introduction of $CO_2$ could make alterations in dissolution characteristics of minerals, chemical compositions and properties of groundwater, and mineral compositions of aquifer materials. Results also showed that geochemical reactions such as cation exchange or dissolution/precipitation of minerals could play an important role to affect physical and chemical characteristics of geologic formations and groundwater.

• Plant Journal
• /
• v.9 no.2
• /
• pp.42-45
• /
• 2013

The worldwide issue of greenhouse gas reduction has recently drawn great attention to carbon capture and storage(CCS). In this study, we developed a 10,000 ton/year pilot injection plant for geological storage of carbon dioxide. Major components of the pilot plant include a pressure pump, a booster pump, and an inline heater to bring liquid carbon dioxide into its supercritical state. The test results show that the pilot plant readily achieves the injection pressure and temperature, showing satisfactory control performance. The overall power consumption is 2,000 ~ 2,500 W, more than 75% of which consumed by the pressure pump. This study will facilitate varied research on greenhouse gas reduction as the only domestically developed system for geological injection.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.6
• /
• pp.689-695
• /
• 1999

Supercritical fluid extraction (SFE), ultrasonic extraction (USE), and accelerated solvent extraction (ASE) were compared with the well known Soxhlet extraction for the extraction of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins(PCDDs) from the XAD-2 resin which was used to adsorb PCDDs in the atmosphere. XAD-2 resin spiked with five PCDDs was chosen as a sample. The optimum conditions for the extraction of PCDDs by SFE were turned out to be the use of CO2 modified with 10% toluene at 100 ℃ and 350 atm, with 5 min static extraction followed by 20 min dynamic extraction. SFE gave a good extraction rate with good reproducibility for PCDDs ranging from 68 to 98%. The ultrasonic extraction of PCDDs from XAD-2 was investigated and compared with other extractions. A probe type method was compared with a bath type. Two extraction solvents, toluene and acetone were compared with their mixture. The use of their mixture in probe type, with 9 minutes of extraction time, was found to be the optimum condition. The average recovery of the five PCDDs for USE was 82-93%. Accelerated solvent extraction (ASE) with a liquid solvent, a new technique for sample preparation, was performed under elevated temperatures and pressures. The effect of tem-perature on the efficiency of ASE was investigated. The extraction time for a 10 g sample was less than 15 min, when the organic solvent was n-hexaneacetone mixture (1 : 1, v/v). Using ASE, the average recoveries of five PCDDs ranged from 90 to 103%. SFE, USE, and ASE were faster and less laborious than Soxhlet extraction. The former three methods required less solvent than Soxhlet extraction. SFE required no concentration of the solvent extracts. SFE and ASE failed to perform simultaneous parallel extractions because of instrumental limitations.

• Journal of Ginseng Research
• /
• v.41 no.4
• /
• pp.595-601
• /
• 2017

Background: Red ginseng oil (RGO) is produced by supercritical $CO_2$ extraction of secondary products derived from Korean Red Ginseng extract. As the use of RGO has increased, product safety concerns have become more important. Methods: In the present study, the subacute oral toxicity and bacterial reverse mutagenicity of RGO were evaluated. Sprague-Dawley rats were orally administered with RGO for 28 d by gavage. Daily RGO dose concentrations were 0 mg/kg body weight (bw), 500 mg/kg bw, 1,000 mg/kg bw, or 2,000 mg/kg bw per day. Bacterial reverse mutation tests included five bacterial strains (Escherichia coli WP2 and Salmonella typhimurium TA98, TA100, TA1535, and TA1537), which were used in the presence or absence of metabolic activation. The plated incorporation method for mutation test was used with RGO concentrations ranging from $312.5{\mu}g$ to $5,000{\mu}g$ per plate. Results: The subacute oral toxicity test results did not reveal any marked changes in clinical characteristics. There were no toxicological changes related to RGO administration in hematological and serum biochemical characteristics in either control or treatment animals. Furthermore, no gross or histopathological changes related to RGO treatment were observed. The bacterial reverse mutation test results did not reveal, at any RGO concentration level and in all bacterial strains, any increase in the number of revertant colonies in the RGO treatment group compared to that in the negative control group. Conclusion: The no-observed-adverse-effect level of RGO is greater than 2,000 mg/kg bw and RGO did not induce genotoxicity related to bacterial reverse mutations.