• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.278-288
• /
• 1998

An efficient and useful method to improve the local stress field in a displacement-formulated finite element solution has been proposed using the theory of conjugate approximations for a stress field and the Loubignac's iterative method for a displacement field. Validity of the proposed method has been tested through three test examples, to improve the stress field and displacement field in the whole domain and the local regions. As a result of analysis on the test examples, it is found that the stress field in the local regions are approximated to those in the whole domain within a few iterations which have satisfied the original finite element equilibrium equation. In addition, it is found that the local stress field are by far better approximated to the exact stress field than the displacement-based stress field with the reduction of the finite-element mesh-size.

• Journal of Technologic Dentistry
• /
• v.44 no.3
• /
• pp.81-88
• /
• 2022

Purpose: This study was conducted to verify the effects of self-esteem and critical thinking disposition on dental laboratory technology students' field practice stress. Methods: The subjects of the study were 198 dental laboratory technology students with clinical practice experience located in Gyeongsangbuk-do and Gyeongsangnam-do. The collected data were analyzed by t-test, ANOVA, correlation analysis, and linear regression analysis using IBM SPSS Statistics ver. 22.0 (IBM). Results: The average self-esteem, critical thinking disposition, and field practice stress scores were 3.76, 3.50, and 2.40, respectively. There was a significant correlation between self-esteem, critical thinking disposition, and field practice stress. It was found that the higher the self-esteem, the lower was the field practice stress. On the contrary, among the sub-items of critical thinking disposition, when intellectual fairness increased, the field practice stress decreased; however, when healthy skepticism increased, the field practice stress increased. Conclusion: Self-esteem and critical thinking disposition were both found to have a substantial effect on field practice stress. Therefore, various educational programs need to increase self-esteem and cultivate critical thinking skills for a successful field practice and field practice stress relief of laboratory technology students.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.7 s.166
• /
• pp.1120-1128
• /
• 1999

An elastic-viscoplastic finite element analysis is performed to investigate detailed growth behavior of creep cracks and the numerical results are compared with experimental results. In Cr-Mo steel stress fields obtained from the crack growth method by mesh translation were compared with both cases that the secondary creep rate is only used as creep material property and the primary creep rate is included. Analytical stress fields, Riedel-Rice(RR) field, Hart-Hui-Riedel(HR) field and Prime(named in here) field, and the results obtained by numerical method were evaluated in details. Time vs. stress at crack tip was showed and crack tip stress fields were plotted. These results were compared with analytical stress fields. There is no difference of stress distribution at remote region between the case of 1st creep rate+2nd creep rate and the case of 2nd creep rate only. In case of slow velocity of crack growth, the effect of 1st creep rate is larger than the one of fast crack growth rate. Stress fields at crack tip region we, in order, Prime field, HR field and RR field from crack tip.

• Nuclear Engineering and Technology
• /
• v.30 no.3
• /
• pp.202-211
• /
• 1998

Interfacial stresses at two-material interfaces and initial displacement field over the entire domain are obtained by modifying the potential energy functional with a penalty function, which enforces continuity of the stresses at the interface of two materials. Based on the initial displacement field and interfacial stresses, a new methodology to generate a continuous stress field over the entire domain has been proposed by combining the modified projection method of stress-smoothing and Loubignac's iterative method of improving the displacement field. Stress analysis is carried out on two examples made of dissimilar materials : one is a two-material cantilever composed of highly dissimilar materials and the other is a zirconium-lined cladding tube made of slightly dissimilar materials. Results of the analysis show that the proposed method provides an improved continuous stress field over the entire domain, and accurately predicts the nodal stresses at the interface, while the conventional displacement-based finite element method produces significant stress discontinuities at the interface. In addition, the total strain energy evaluated from the improved continuous stress field converges to the exact value in a few iterations.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.121-122
• /
• 2022

Recently, the scale of construction project is getting bigger compared to previous projects. Therefore, the job stress of the field manager responsible for the construction project is getting more and more intense. Therefore, construction companies should establish a job stress management plan for stable human resource management of the field managers. From this perspective, in this study was developed a job stress measurement system in connection with MBTI personality types. The developed system allows the job stress of the field manager to be judged on a scale from 1 to 9 points. Accordingly, it is expected that construction companies will contribute to the effective management of field managers in the future.

• Structural Engineering and Mechanics
• /
• v.34 no.2
• /
• pp.143-157
• /
• 2010

This paper presents theoretical solutions for the three-dimensional (3D) stress field in an infinite isotropic elastic plate containing a through-the-thickness circular hole subjected to far-field in-plane loads by using Kane and Mindlin's assumption. The dangerous position, where the premature fracture or failure of the plate will take place, the expressions of the tangential stress at the surface of the hole and the out-of-plane stress constraint factor are found in a concise, explicit form. Based on the present theoretical solutions, a comprehensive analysis is performed on the deviated degree of the in-plane stresses from the related plane stress solutions, stress concentration and out-of-plane constraint, and the emphasis has been placed on the effects of the plate thickness, Poisson's ratio and the far-field in-plane loads on the stress field. The analytical solution shows that the effects of the plate thickness and Poisson's ratio on the deviation of the 3D in-plane stress components is obvious and could not be ignored, although their effects on distributions of the in-plane stress components are slight, and that the effect of the far-field in-plane loads is just on the contrary of that of the above two. When only the shear stress is loaded at far field, the stress concentration factor reach its peak value about 8.9% higher than that of the plane stress solutions, and the out-of-plane stress constraint factor can reach 1 at the surface of the hole and is the biggest among all cases considered.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.4
• /
• pp.47-57
• /
• 1994

This study investigates the crack propagation behavior to examine the effect of welding residual stress by the superposition method. Especially, as the crack propagation behavior is affected by the applied stress and the stress ratio in compressive residual stress filed, it is studied for three cases as follows; (1) $K_{min}$is smaller than l $K_{r}$l, (2) $K_{min}$ is smaller than l $K_{r}$l in the later stage, (3) $K_{min}$is lager than l $K_{r}$l. The resuslts show that the superposition method is very useful in all the three cases of compressive residual stress field, but is inappropriate in predicting the crack propagation behavior in tensile residual stress field.field.field.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.4
• /
• pp.51-56
• /
• 1999

Finite element method was utilized to analyze crack tip stress and displacement field under drying stress case as stepwise loading. Opening mode of single-edge-notched model was employed and analyzed by linear elastic fracture mechanics of plane stress case. The drying stresses were applied as stepwise loads at the boundary elements of the model with 10 steps of time serial. The stress intensity factor($K_I$) for opening mode reached to its maximum just prior to the stress reversal. The $K_I$ from the displacement fields revealed 1.7 times higher than those from stress fields. By comparing the two sets of $K_I$ from displacement and stress fields, single parameter $K_I$ showed its validity to characterize displacement fields around the crack tip front while stress field could not be characterized due to large variations between two sets of data.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.740-753
• /
• 2013

The purpose of this study was to examine present condition of social work field education, students' stress/stress coping strategies in their field practicum, and to find out the difference according to the factors related field education. This study carried out a survey targeting 202 students who finished their social work field practicum and took their course work in 2012, from 4 different universities in the northern Gyeonggi province & Seoul. As the result, in the area of stress, the highest rank was the lack of professional knowledge/skills, the second was the environment of field practicum, and the third was the burden of tasks that they had to perform. About the coping strategies, it was found that students utilized 'problem-solving focused' the most, pursuing 'social support' as the second, and 'avoidance' strategies as the least. Factors influencing on differences of stress level depending on field work experiences were whether they had previous field experience, how much time they participated in previous volunteer activities, whether they attended orientation for their field practicum, regularity/frequency of supervision, the satisfaction on their social work/welfare major, and the satisfaction on their field practicum or supervision. Based on the results, suggestions for development in field education system were presented.

• Tribology and Lubricants
• /
• v.20 no.4
• /
• pp.190-196
• /
• 2004

The effect of tangential loading on the subsurface stress field has been investigated numerically. As tangential load increases, the subsurface stress field expands more widely to the direction of the tangential load. Places of the maximum shear stress and the maximum effective stress are getting closer to the surface with the increasing tangential load. The tangential load in an elasto-hydrodynamic lubrication condition is so low that it does not affect the subsurface stress field.