• Korea-Australia Rheology Journal
• /
• v.17 no.4
• /
• pp.149-156
• /
• 2005

A simple constitutive model for viscoelastic suspensions is discussed in this paper. The model can be used to predict the rheological properties (relative viscosity and all stresses) for viscoelastic suspensions in shear and elongational flow, and the constitutive equations combine a 'viscoelastic' behaviour component and a 'Newtonian' behaviour component. As expected, the model gives a prediction of positive first normal stress difference and negative second normal stress difference; the dimensionless first normal stress difference strongly depends on the shear rate and decreases with the volume fraction of solid phase, but the dimensionless second normal stress difference (in magnitude) is nearly independent of the shear rate and increases with the volume fraction. The relative viscosities and all the stresses have been tested against available experimental measurements.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.313-330
• /
• 1993

The propagating crack problems under dynamic plane mode in orthotropic material is studied in this paper. To analyze the dynamic fracture problems in orthortropic material, it is important to know the dynamic stress components and dynamic displacement components around the crack tip. Therefore the dynamic stress components of dynamic stress field and dynamic displacement components of dynamic displacement field in the crack tip of orthotropic material under the dynamic load and the steady state in crack propagation were derived. When the crack propagation speed approachs to zero, the dynamic stress component and dynamic displacement components derived in this study are identical to the those of static state. In addition, the relationships between dynamic stress intensity factor and dynamic energy release rate are determinded by using the concept of crack closure closure energy with the dynamic stresses and represented according to physical properties of the orthotrophic material and crack speeds. The faster the crack velocity, the greater the stress value of stress components in crack tip. The stress value of the stress component of crack tip is greater when fiber direction coincides with the crack propagation than when fider direction is normal to the crack propagation.

• Journal of Korean Society for Quality Management
• /
• v.18 no.1
• /
• pp.129-147
• /
• 1990

This study is to refer to the optimization problems when the stress and strength follow the time dependent model, considering a decision making process in the design methodology from reliability viewpoint. Reliability of a component can be expressed and computed if the probability distributions for the stress and strength in the time dependent case are known. The factors which determine the parameters of the distributions for stress and strength random variables can be controlled in design problems. This leads to the problem of finding the optimal values of these parameters subject to resources and design constraints. This paper is to present techniques for solving the optimization problems at the design stage like as minimizing the total cost to be spent on controlling the stress and strength parameters for random variables subject to the constraint that the component must have a specified reliability, alternatively, maximizing the component reliability subject to certain constraints on amount of resources available to control the parameters. The derived expressions and computations of reliability in the time dependent case and some optimization models of these cases are discussed. The special structure of these models is exploited to develop the optimization techniques which are illustrated by design examples.

• Journal of Ship and Ocean Technology
• /
• v.9 no.4
• /
• pp.11-22
• /
• 2005

This paper addresses details of wave load nonlinearity effect on stress RAO and damage ratio using component stochastic fatigue analysis. Traditional spectral fatigue analysis for ship structure is based on linear theory; however, there are a number of nonlinearity sources. Especially loading nonlinearity, such as hydrodynamic pressure applying to ship side and gravity changes due to roll and pitch motion, is thought to critically violate the linearity assumption of spectral fatigue analysis, which involves stress RAO as linear parameter. The main focus is placed on how to idealize complicated characteristics of loading nonlinearity and how to implement the nonlinear bias to linear spectral fatigue analysis.

• Clinics in Shoulder and Elbow
• /
• v.21 no.2
• /
• pp.105-110
• /
• 2018

Since the introduction of shoulder arthroplasty by Neer in 1974, the design of not only the glenoid component but also the humeral component used in shoulder arthroplasty has continually evolved. Changes to the design of the humeral component include a gradually disappearing proximal fin; diversified surface finishes (such as smooth, grit-blasted, and porous coating); a more contoured stem from the originally straight and cylindrical shape; and the use of press-fit uncemented fixation as opposed to cemented fixation. Despite the evolution of the humeral component for shoulder arthroplasty, however, stem-related complications are not uncommon. Examples of stem-related complications include intraoperative humeral fractures, stem loosening, periprosthetic fractures, and stress shielding. These become much more common in revision arthroplasty, where patients are associated with further complications such as surgical difficulty in extracting the humeral component, proximal metaphyseal bone loss due to stress shielding, intraoperative humeral shaft fractures, and incomplete cement removal. Physicians have made many attempts to reduce these complications by shortening the stem of the humeral component. In this review, we will discuss some of the limitations of long-stem humeral components, the feasibility of replacing them with short-stem humeral components, and the clinical outcomes associated with short-stemmed humeral components in shoulder arthroplasty.

• The Korean Journal of Applied Statistics
• /
• v.5 no.2
• /
• pp.193-209
• /
• 1992

We consider a Step Life Testing which is deviced for a two-component serial system with the considerably long life time. In the modelling stage we discuss the bivariate exponential distribution suggested by Block and Basu as the bivariate survival function for the two-component system, and develope the cumulative exposure model introduced by Nelson so that it can be used under the bivariate function. We consider inference on the component life time when the components are at work in the system by combining the information from system life test and that from the component tests carried out separately under the controlled environment. In data analysis, maximum likelihood estimators are discussed with the initial value obtained by an weighted least square method. Finally we discuss the optimal time for changing the stress in the simple step stress life testing.

• Steel and Composite Structures
• /
• v.38 no.2
• /
• pp.141-150
• /
• 2021

In the present paper we have investigated the Stoneley wave propagation at the interface of two dissimilar homogeneous nonlocal magneto-thermoelastic media under the effect of hall current applied to multi-dual-phase lag heat transfer. The secular equations of Stoneley waves have been derived by using appropriate boundary conditions. The wave characteristics such as attenuation coefficients, temperature distribution and phase velocity are computed and have been depicted graphically. Effect of nonlocal parameter and hall effect are studied on the attenuation coefficient, phase velocity, temperature distribution change, stress component and displacement component. Also, some particular cases have been discussed from the present study.

• Journal of the Korean Society of Systems Engineering
• /
• v.13 no.1
• /
• pp.25-31
• /
• 2017

This paper aims to evaluate the conservatism in the design of APR1400 (Advanced Pressurized water Reactor 1400 designed by KHNP) reactor internals component, the LSS (Lower Support Structure). Re-engineering of the LSS is done based on the system design condition data and applicable ASME code that was used for the original APR1400 design. Systems engineering approach is applied to design the LSS of APR1400 without refering APR1400 LSS dimensional parameters and tries to verify important design parameters of APR1400 LSS as well as the validity of the re-engineering design process as independent verification method of reactor component design. Systems engineering approach applied in this study following V-model approach. The re-engineered LSS design showed more than enough conservatism for static loading case. The maximum deflection of LSS is under 1mm (calculated value is 0.25mm) from 4000 mm diameter of LSS. Hence the deflection can be ignored in other reactor internals for structural integrity assessment. Especially the effect of LSS deflection on fuel assembly can be minimized and which is one of the main requirements of LSS design. It also showed that the maximum stress intensity is 2.36MPa for the allowable stress intensity of 60.1 MPa. The stress resulted from the static load is also very small compared to the maximum allowable stress intensity, hence there is more than enough conservatism in the LSS design.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.173-174
• /
• 2013

In this study, the tensile properties of sealants by heat deterioration were measured and analysed to gather the basic data of sealant because these studies do not have been investigated in Korea. Most general one-component silicone sealants were used and test specimen was I-type. The test parameters are sealant types which have different density and heat deterioration time in 80℃. As a result, the rat of reduction in area by heat deterioration was considerable increased at SR-A compared with SR-B. The tensile properties by heat deterioration decreased at SR-A because the specimen by deterioration occurred adhesive failure before tensile test. However, SR-B specimen was increased at maximum tensile stress but decreased at elongation in maximum tensile stress. Also, Maximum principal stress was measured at the edge of specimen by FEM simulation in order to find out failure points.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.258-267
• /
• 1998

This study reviews the influence function method(IFM) for calculating stress intensity factors (SIFs, K) and modifies it to apply for the estimating the residual fatigue life for the cracked components under complex stress fields. An IFM has been developed to analyze SIFs for surface cracks which are subjectedto nonuniformly distributed stresses. Through elastic superposition, the influence function method properly accounts for redistribution of stress as the crack grows through the component. This influence function is unique to the given geometry and independent of the loading. Some examples have been provided to show the effectiveness of the IFM including the distributions of K in a residual stress field. The significant effect of residual stress upon fatigue crack growth in a welded component has been demonstrated with the IFM.