• Composites Research
• /
• 제27권6호
• /
• pp.213-218
• /
• 2014

본 논문에서는 특성길이 및 특성 곡선 방법을 굽힘 하중 상태의 복합재 기계적 체결부에 적용하여 강도를 예측하는 연구를 수행하였다. 선행 연구들이 특성길이 및 특성 곡선 방법을 인장과 압축 하중에만 적용한 것과 달리 본 연구에서는 굽힘 하중에 적용하고 그 가능성을 확인했다. 체결부 파손 해석을 위해 ABAQUS를 사용하여 핀과 모재의 접촉 및 마찰을 고려한 비선형 해석을 수행하였다. 해석결과를 이용하여 얻은 특성 곡선상에서 Tsai-Wu 이론을 적용하여 파손 및 파단 양상을 예측하였다. 또한 복합재 시편에 굽힘 하중을 가해 파손하중을 알아보는 실험을 통해 검증한 결과 해석으로 얻은 복합재 체결부의 파손하중이 실험 결과와 매우 잘 일치함을 확인하였다. 결론적으로 특성길이 및 특성 곡선 방법이 굽힘 하중 상태의 복합재 기계적 체결부의 강도를 비교적 잘 예측할 수 있다는 것을 알 수 있었다.

• KCI Concrete Journal
• /
• 제12권1호
• /
• pp.57-68
• /
• 2000

The effect of structure size on the nominal strength of unidirectional fiber-polymer composites, failing by propagation of a kink band with fiber microbuckling, is analyzed experimentally and theoretically. Tests of novel geometrically similar carbon-PEEK specimens, with notches slanted so as to lead to a pure kink band (without shear or splitting cracks), are conducted. The specimens are rectangular strips of widths 15.875, 31.75. and 63.5 mm (0.625, 1.25 and 2.5 in and gage lengths 39.7, 79.375 and 158.75 mm (1.563, 3.125 and 6.25 in.). They reveal the existence of a strong (deterministic. non-statistical) size effect. The doubly logarithmic plot of the nominal strength (load divided by size and thickness) versus the characteristic size agrees with the approximate size effect law proposed for quasibrittle failures in 1983 by Bazant This law represents a gradual transition from a horizontal asymptote, representing the case of no size effect (characteristic of plasticity or strength criteria), to an asymptote of slope -1/2 (characteristic of linear elastic fracture mechanics. LEFM) . The size effect law for notched specimens permits easy identification of the fracture energy of the kink bandand the length of the fracture process zone at the front of the band solely from the measurements of maximum loads. Optimum fits of the test results by the size effect law are obtained, and the size effect law parameters are then used to identify the material fracture characteristics, Particularly the fracture energy and the effective length of the fracture process zone. The results suggest that composite size effect must be considered in strengthening existing concrete structural members such as bridge columns and beams using a composite retrofitting technique.

• 한국표면공학회지
• /
• 제41권6호
• /
• pp.341-350
• /
• 2008

In friction stir welding for 6061-T6 with various traveling speed and rotation speed conditions, the best mechanical characteristics presented in traveling speed of 507 mm/min and rotation speed of 1100RPM. The maximum tensile strength and yield strength increased with the increasing of traveling speed. The result of the electrochemical characteristic evaluation in friction stir welding at optimum conditions for 6061-T6 Al alloy presented a good characteristics compare to base metal.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권8호
• /
• pp.445-450
• /
• 2000

Many successful developments and microscopic studies have been made on the high quality insulating materials. However, a little attention have given to the macroscopic interface in HV(High Voltage) insulating systems. In this study, AC interfacial breakdown strength and V-t characteristic of the interface between Epoxy/EPDM(ethylene propylene diene terpolymer) are investigated. Electrode system is designed to reduce the charges from electrodes and to have the tangential potentials along the interface between Epoxy/EPDM by FEM(finite elements method). The AC breakdown strength is observed when HV is given to the interface. It is shown that AC interfacial breakdown strength is improved by increasing interfacial pressure and oiling. In particular, it was saturated at certain interfacial pressure level. V-t characteristic is able to extend to the life time of the interface between Epoxy/EPDM. Oiling also plays a good roll in prolongation of the life time.

• 한국지반공학회논문집
• /
• 제20권7호
• /
• pp.171-181
• /
• 2004

본 연구는 불포화 상태 전 범위에 대한 사질토의 인장강도 모델화 가능성을 조사하기 위해 실시 되었다. 새로 개발된 직접인장시험기법을 이용하여 인장시험이 실시되었다. 측정된 결과는 Rumpf 및 Schubert가 동일크기의 이상적인 구에 대해 개발한 이론적인 인장강도 모델들에 의한 예측 값과 비교 되었다. 이를 위해 석션-포화실험을 통해 얻어진 흙-수분특성곡선을 이용하여 이론모델에 있어 중요한 요소인 불포화상태(pendular, funicular, capillary) 구분 및 음의 간극수압 값을 산정하는데 사용하였다. Pendular 상태에서 불포화모래의 비선형 거동이 Rumpf의 모델에 의해 적절이 묘사되었다. Funicular 및 capillary상태의 경우, 함수비가 증가함에 따라 인장강도가 증가하다 최고 값이 도달한 후 다시 감소하는 실험 측정치의 경향도 Schubert의 모델에 의해 적절히 묘사되었다. 본 비교 연구는 이상적인 단일 크기의 입자에 대해 개발된 이론적인 모델이 다양한 크기를 갖는 불포화 사질토의 인장강도를 예측할 수 있다는 가능성을 뒷받침해준다.

• The Journal of Advanced Prosthodontics
• /
• 제6권3호
• /
• pp.224-232
• /
• 2014

PURPOSE. The purpose of the present study was to evaluate the effect of thermocycling and mechanical loading on the biaxial flexural strength and the phase transformation of one Ce-TZP/$Al_2O_3$ and two Y-TZP core materials. MATERIALS AND METHODS. Thirty disc-shaped specimens were obtained from each material. The specimens were randomly divided into three groups (control, thermocycled, and mechanically loaded). Thermocycling was subjected in distilled water for 10000 cycles. Mechanical loading was subjected with 200 N loads at a frequency of 2 Hz for 100000 times. The mean biaxial flexural strength and phase transformation of the specimens were tested. The Weibull modulus, characteristic strength, 10%, 5% and 1% probabilities of failure were calculated using the biaxial flexural strength data. RESULTS. The characteristic strengths of Ce-TZP/$Al_2O_3$ specimens were significantly higher in all groups compared with the other tested materials (P<.001). Statistical results of X-ray diffraction showed that thermocycling and mechanical loading did not affect the monoclinic phase content of the materials. According to Raman spectroscopy results, at the same point and the same material, mechanical loading significantly affected the phase fraction of all materials (P<.05). CONCLUSION. It was concluded that thermocycling and mechanical loading did not show negative effect on the mean biaxial strength of the tested materials.

• The Journal of Advanced Prosthodontics
• /
• 제11권4호
• /
• pp.202-208
• /
• 2019

PURPOSE. Fabrication of zirconia restorations with ideal mechanical properties in a short period is a great challenge for clinicians. The purpose of the study was to investigate the effect of heating rate on the mechanical and microstructural properties of monolithic zirconia. MATERIALS AND METHODS. Forty monolithic zirconia specimens were prepared from presintered monolithic zirconia blanks. All specimens were then assigned to 4 groups according to heating rate as Control, Group $15^{\circ}C$, Group $20^{\circ}C$, and Group $40^{\circ}C$. All groups were sintered according to heating rates with the sintering temperature of $1500^{\circ}C$, a holding time of 90 minutes and natural cooling. The phase composition was examined by XRD analysis, three-point bending test was conducted to examine the flexural strength, and Weibull analysis was conducted to determine weibull modulus and characteristic strength. Average grain sizes were determined by SEM analysis. One-way ANOVA test was performed at a significance level of 0.05. RESULTS. Only tetragonal phase characteristic peaks were determined on the surface of analyzed specimens. Differences among the average grain sizes of the groups were not statistically significant. The results of the three-point bending test revealed no significant differences among the flexural strength of the groups (P>.05). Weibull modulus of groups was ranging from 3.50 to 4.74. The highest and the lowest characteristic strength values were obtained in Group $20^{\circ}C$ and Control Group, respectively. CONCLUSION. Heating rate has no significant effect on the flexural strength of monolithic zirconia. Monolithic zirconia restorations can be produced in shorter sintering periods without affecting the flexural strength by modifying the heating rate.

• 한국농공학회논문집
• /
• 제48권3호
• /
• pp.85-94
• /
• 2006

Practially useful method of steel fiber for construction work is presented in this study. The most important purpose of this study is to develop a model which can predict mechanical behavior of the structure according to aspect ratio and volume fraction of steel fiber. Experiments on compressive strength, elastic modulus, and splitting strength were performed with self-made cylindrical specimens of variable aspect ratios and volume fractions. The experiment showed that compressive strength was not in direct proportion to volume fraction which doesn't seem to have great influence over compressive strength. However, splitting strength showed almost direct proportion to aspect ratio and volume fraction. Improvement of optimal efficiency was confirmed when the aspect ratio was 70. Experiments on flexural strength, fracture energy, and characteristic length were carried out with self-manufactured beams with notch. As a result, increases of flexural strength, fracture energy, and characteristic length according to increase of volume fraction tend to be prominent when aspect ratio is 70. The steel fiber improves concrete to be more ductile and tough. Moreover, regression analysis was the performed and predictable model was developed after determining variables. With comparison and analysis of suggested estimated values and measured data, reliance of the model was verified.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.61-64
• /
• 2007

This study progressed fresh mortar test and hardening mortar test as a characteristic analysis of high strength mortar that is not water but replaced liquid, and the results are summarized as following. As a characteristic of fresh mortar, the flow that is following by the changes of the kind of replaced liquid decreased in order of E, M, A, K, O, L, G, and H, and it is indicated that liquid except H, the flow was better then others. The test show the bending strength of G, L, K, O at and H were more increased then plain as the replaced liquid change on the first day, and on the 28th day, G, L, and K was more increased then plain. The compressive strength of G, K, and O was similar with P(-10) at the first day. On 7th day, the test show G, and L was more increased then P(-10), and other replaced liquid were similar or decreased. On the 28th day, G, K, and A was similar with P(-10) and it is decreased in order of E, L, O, and H.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.13-14
• /
• 2017

Red mud is an inorganic by-product produced from the mineral processing of alumina from Bauxite ores. This study is to investigate characteristic with respect to curing conditions according to the red mud content. The results best of best showed that the water curing compressive strength better than atmospheric curing, steam curing.