• 상하수도학회지
• /
• 제21권2호
• /
• pp.215-224
• /
• 2007

The purpose of this study was to estimates water supply reliability indices of the water supply by Allocation Rules(AR) for parallel reservoirs. Rule (A) can be considered it as only current storage, Rule(B) can be considered it as current storage and inflow and Rule(C) can be considered it as current storage, inflow and water supply capacity. First, conditions of water supply are divided by Condition I for the monthly constant water supply and Condition II for the monthly varied water supply. Second, results of allocation coefficients are revealed the smallest different at Rule(C). The analysis of water supply showed that the capability of water supply is superior to the Rule(B), it is superior to the Rule(C) on the base of the balance of water supply. The reliability analysis was highly showed at the Rule(B) and Rule(C). A methodology for the analysis of water supply was developed and applied to the parallel reservoir system from this research, The operation rule for the parallel reservoir can be slightly modified and successfully applied to the different kinds of the parallel reservoir system.

• 한국환경과학회지
• /
• 제13권12호
• /
• pp.1041-1048
• /
• 2004

In this study the results of optimal water supply analysis by operating constraints of reservoirs during drought period are as follows. During drought period, water supply reliability is possible about $97\~61{\%}$ by CASE 1-CASE 5. Water supply reliability is possible about $97.3{\%}$ in case of the Andong dam and $87.7{\%}$ in case of the Imha dam by CASE 3. Also, under the constraints of CASE 4, water supply reliability is possible about $87.5{\%}$ in case of the Andong dam and $73.3{\%}$ in case of the Imha dam. The reason what low of available water supply ratio is decreased inflow of Imha dam. When compare standard deviation of average storage with standard deviation of storage, stable storage can be secured during successive drought period. And it also can minimize shortage of water during drought. therefore, it is impossible that reservoir supply sufficient water but change of operating condition is better than pervious on that followed by full reservoir level. It is need that the study for optimal water supply during drought period has to be continued.

• Transactions on Electrical and Electronic Materials
• /
• 제18권2호
• /
• pp.111-118
• /
• 2017

The increased diversity of different types of energy sources requires moving towards smart distribution networks. This paper proposes a probabilistic DG (distributed generation) units planning model to determine technology type, capacity and location of DG units while simultaneously allocating ESS (energy storage systems) based on pre-determined capacities. This problem is studied in a wind integrated power system considering loads, prices and wind power generation uncertainties. A suitable method for DG unit planning will reduce costs and improve reliability concerns. Objective function is a cost function that minimizes DG investment and operational cost, purchased energy costs from upstream networks, the defined cost to reliability index, energy losses and the investment and degradation costs of ESS. Electrical load is a time variable and the model simulates a typical radial network successfully. The proposed model was solved using the DICOPT solver under GAMS optimization software.

• 한국농공학회논문집
• /
• 제54권6호
• /
• pp.39-44
• /
• 2012

Water supply capacity and operational capability in agricultural reservoirs are expressed differently in the limited storage due to seasonal and local variation of precipitation. Since agricultural water supply and demand basically assumes the uncertainty of hydrological phenomena, it is necessary to improve probabilistic approach for potential risk assessment of water supply capacity in reservoir for enhanced operational storage management. Here, it was introduced the irrigation vulnerability characteristic curves to represent the water supply capacity corresponding to probability distribution of the water demand from the paddy field and water supply in agricultural reservoir. Irrigation vulnerability probability was formulated using reliability analysis method based on water supply and demand probability distribution. The lower duration of irrigation vulnerability probability defined as the time period requiring intensive water management, and it will be considered to assessment tools as a risk mitigated water supply planning in decision making with a limited reservoir storage.

• 한국통신학회논문지
• /
• 제42권2호
• /
• pp.345-348
• /
• 2017

본 논문은 분산 저장 시스템의 내구도 평가 지표인 기대 데이터 수명(Mean Time To Data Loss; MTTDL)을 이중 노드 복구가 가능한 상황에서 분석하고 단일 노드 복구 상황과 비교하였다.

• 전기학회논문지P
• /
• 제67권3호
• /
• pp.160-167
• /
• 2018

In this paper, a black box, which is provided the reliability and user safety of home battery energy storage system connected with solar energy generation, is developed. In the developed scheme, a status and diagnosis data of battery management system, power conditioning system, solar energy generation and grid is measured. This status and diagnosis data is stored and displayed in the developed black box. In addition, this status and diagnosis data is stored and displayed in a monitoring system and a smart phone of user. A performance evaluation of the developed black box is carried out using emulator of home battery energy storage system connected with solar energy generation. Consequently, the developed black box is proved its superiority of the reliability and user safety.

• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.599-604
• /
• 2018

유도무기체계에서 특히 유도탄은 높은 신뢰도 및 가용도의 유지와 함께 경제적인 정비가 매우 중요한 무기체계이다. 대한민국 소요군에서는 야전에 배치된 모든 유도탄에 대해 정기적인 검사를 필수적으로 수행하고 있다. 정기적인 주기마다 야전에 배치된 모든 유도탄은 정비부대로 보내져 검사되고 혹은 검사 시 고장이 발견된다면 수리된다. 그리고 유도탄은 수시적으로 수행 가능한 자체점검의 기능을 보유하고 있다. 유도탄이 보유한 자체점검으로 유도탄이 발사대에서 운용될 동안이나 저장되어 있는 동안에 고장을 발견해 낼 수 있다. 그러므로 유도탄의 신뢰도와 정비 비용은 검사주기의 기간과 자체점검 및 정기검사의 수준에 매우 영향을 받음을 알 수 있다. 본 논문에서는 수시점검과 정기검사를 받는 유도탄의 저장신뢰도를 예측하는데 있어 기존에 연구된 모델을 수정하여 고장의 중복을 배제한 새로운 유도탄 저장신뢰도 예측 모델을 제시하였다. 그리고 수치적 예시를 들어 새롭게 제시한 모델의 특성을 분석하였다. 또한, 제시된 모델은 검사주기 기간을 결정하는데 유용하게 활용될 수 있다.

• 품질경영학회지
• /
• 제40권3호
• /
• pp.259-269
• /
• 2012

Purpose: The purpose of this study was to find out that the statistical method of stockpile reliability of ammunition by items can be applied to the reliability assessment of stockpile ammunition. Methods: We reviewed the statistical method of stockpile reliability of ammunition by items and verified the possibility of its application by case study. Results: We found that the statistical method of stockpile reliability of ammunition by items is very useful and effective to present the reliability of ammunition based on each item and to predict the change of the reliability in the future. The reliability of proximity fuse was about 94.5% and was influenced by manufacture's year and the difference between lot and lot more than storage period. Conclusion: The statistical method of stockpile reliability of ammunition by items can be applied to the reliability assessment of various stockpile ammunitions such as ammunition for mortar and canon.

• 정보저장시스템학회논문집
• /
• 제6권2호
• /
• pp.68-73
• /
• 2010

The interest in acquiring high efficiency solar cells has been steadily increasing due to various advantages such as low-cost installation, pollution free and everlasting energy generation. In order to raise the cell efficiency, there has been a lot of effort to develop effective anti-reflection coatings. In this work, the main objective was to investigate the effects of particle size and annealing temperature of silica anti-reflection coatings to maximize the cell efficiency as well as reliability. It was shown that the light transmittance could be increased by a few percent over a certain range of wavelength using the silica coating. Also, the tribological properties of the coating could be improved through the annealing process, which led to better reliability of the coating.

• 정보저장시스템학회논문집
• /
• 제9권2호
• /
• pp.56-61
• /
• 2013

The recent increased use of mobile phone has resulted in a technical focusing on reliability issues related to drop performance. Since mobile phone may be dropped several times during their use, it is required to survive common drop accidents. The plastic injection parts such as base stopper and carrier in the encoder type actuator can be broken easily in the actual reliability test of 1.5m free drop. So, we analyzed the shock resistance characteristics of auto focus actuator with variables in the material properties using finite element method. By applying the new resin materials, we can decrease the breakage of plastic injection parts and improve the reliability of mobile phone.