• Spatial Information Research
• /
• v.15 no.2
• /
• pp.181-187
• /
• 2007

To make digital terrain data, automatic correlation matching by stereo airborne/satellite images has been researched. The result of automatic correlation matching has a limit on extracting exact ground height because of angle of sensor, tree of height. Therefore, the amount of editing works depend on the distribution of spatial feature in images as well as image quality. This paper shows that the automatic correlation matching result was affected by density and height of tree.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.14-17
• /
• 2008

Recently, several advanced flow visualization techniques such as Particle Image Velocimetry (PIV) including stereo PIV, holographic PIV, and dynamic PIV have been developed. These advanced techniques have strong potential as the experimental technology which can be used for verifying numerical simulation. In addition, there would be indispensable in solving complicated thermo-fluid flow problems not only in the industrial fields such as automotive, space, electronics, aero- and hydro-dynamics, steel, and information engineering, but also in the basic research fields of medical science, bio-medical engineering, environmental and energy engineering etc. Especially, NT Nano Technology) and BT (Bio Technology) strongly demand these advanced measurement techniques, because it is difficult for conventional methods to observe most complicated nano- and bio-fluidic phenomena. In this paper, the basic principle of these advanced visualization techniques and their practical applications which cannot be resolved by conventional methods, such as flow in automotive HVAC system, ship and propeller wake, three-dimensional flow measurement in micro-conduits, and flow around a circulating cylinder will be introduced.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.11a
• /
• pp.164-165
• /
• 2017

본 논문에서는 고속의 이동체를 추적하기 위하여 적외선 스테레오 카메라 시스템을 이용하였다. 열원을 감지할 수 있는 적외선 카메라를 이용해 고온의 추진체를 찾는다, 그리고 고속 이동체의 3 차원 위치를 계산하기 위해 스테레오 카메라 시스템을 사용하여 카메라와 고속 이동체 사이의 거리를 계산하였다. 마지막으로 인공신경망을 이용한 회귀분석으로 고속 이동체의 궤적을 추정하였다. 제안한 시스템이 동작하는 것을 실험 결과를 통해 보인다.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.14-17
• /
• 2008

Recently, several advanced flow visualization techniques such as Particle Image Velocimetry (PIV) including stereo PIV, holographic PIV, and dynamic PIV have been developed. These advanced techniques have strong potential as the experimental technology which can be used for verifying numerical simulation. In addition, there would be indispensable in solving complicated thermo-fluid flow problems not only in the industrial fields such as automotive, space, electronics, aero- and hydro-dynamics, steel, and information engineering, but also in the basic research fields of medical science, bio-medical engineering, environmental and energy engineering etc. Especially, NT (Nano Technology) and BT (Bio Technology) strongly demand these advanced measurement techniques, because it is difficult for conventional methods to observe most complicated nano- and bio-fluidic phenomena. In this paper, the basic principle of these advanced visualization techniques and their practical applications which cannot be resolved by conventional methods, such as flow in automotive HVAC system, ship and propeller wake, three-dimensional flow measurement in micro-conduits, and flow around a circulating cylinder will be introduced.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.637-642
• /
• 2006

A plastic zone size is regarded as a measure of material resistance, and also it determines the fracture behavior. The importance of estimating or measuring the plastic zone size cannot be too emphasized. In this article, SDSP(Stereo Digital Speckle Photography) is examined as a new techniques to measure the plastic zone developed in a ductile metal. This technique is simple, vibration free and non-contact, and measures simultaneously in-plane displacements as well as out-of plane displacements like the side necking. Experimental results for a CT specimen are presented to demonstrate the accuracy in comparison with those obtained by recrystallization technique and finite element analysis.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.259-261
• /
• 2008

GIS-based spatial data integration tasks have used exhaustive thematic maps generated from sparsely sampled data or satellite-based exhaustive data. Due to a simplification of reality and error in mapping procedures, such spatial data are usually imperfect and of different accuracy. The objective of this study is to carry out a sensitivity analysis in connection with input topographic data for landslide hazard mapping. Two different types of elevation estimates, elevation spot heights and a DEM from ASTER stereo images are considered. The geostatistical framework of kriging is applied for generating more reliable elevation estimates from both sparse elevation spot heights and exhaustive ASTER-based elevation values. The effects of different accuracy arising from different terrain-related maps on the prediction performance of landslide hazard are illustrated from a case study of Boeun, Korea.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.37-40
• /
• 2008

The purpose of this paper is to extract DEMs from Spot-3 strips using orbit modeling technique. Spot-3 stereo strip images along 420km in distance were used for experiments. The orbit modeling technique has been suggested to establish accurate geometric models for a whole strip taken on the same orbit using only a small number of GCPs on the top area of the strip. This method enables extraction of orientation parameters of the scene along the strip that is needed to generate DEMs. Consequently, we were able to extract DEMs over the areas without accurate GCPs obtained by GPS surveying per each scene. Assessment of accuracy was carried out using USGS DTED. DEMs generated from the orbit modelling technique suggested showed satisfactory performance when quantitative analysis of accuracy assessment was carried out.

• Journal of the Korean Ceramic Society
• /
• v.42 no.10 s.281
• /
• pp.685-690
• /
• 2005

Pb(Zr,Ti)$O_{3}$Pb($Mn_{1/3}$$Nb_{2/3}$)$O_{3}$ powder was successfully synthesised by high-energy milling method, and the behavior of low­temperature sintering and piezoelectrical properties of Pb(Zr,Ti)$O_{3}$-Pb($Mn_{1/3}$$Nb_{2/3}$)$O_{3}$ ceramics were investigated as a function of mechanical alloying time. In order to confirm whether the Perovskite phase in this composition was formed by mechanical activation technique or not, we performed X-Ray Diffraction pattern analysis (XRD). The microstructure for the sintered samples were characterized using a Scanning Electronic Microscope (SEM). And the piezoelectrical properties ($k_{p}$ and $Q_{m}$) of the sintered samples was measured using HP 4194A impedance analyzer.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.10
• /
• pp.874-880
• /
• 2002

A number of techniques have been proposed for 3D display using view-difference of two eyes. These methods do not express enough reality like real world. The display images have to change according to the position of a viewer to improve reality. In this paper, we present an approach for generating intermediate image between two different view images by applying new image interpolation algorithm The interpolation algorithm is designed to cope with complex shapes. The proposed image interpolation algorithm generates rotated image about vertical axes by any angle from base images. Each base image that was obtained from CCD camera has an view-angle difference of $3^{\circ}C$, $5.5^{\circ}C$, $^{\circ}C$, $22^{\circ}C$, and $45^{\circ}C$. The proposed into mediate image generation method uses the geometric analysis of image and depth information through the block-based matching method.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.151-159
• /
• 2003

This study presents method for self-calibration of the SEM(Scanning Electron Microscope) stereo image using the standard microprobe with same grid pattern and using parallel and central perspective projection equation. Result showed that parallel projection method is more suitable for standard microprobe. The maximum error of 3D coordinates acquired by this method did not exceed 5 $\mu\textrm{m}$, and DSM(Digital Surface Model) for three dimensional measurement of the rock sample was generated by the digital photogrammetry. This result can be used for quantification of micro scale change of shape and analysis of the micro morphology of rock due to weathering.